puddles and bubbling around injectors

This is the Forum for all your Citroen Technical Questions, Problems or Advice.
coatess
Posts: 5
Joined: 09 Jan 2022, 18:20
x 3

puddles and bubbling around injectors

Unread post by coatess »

Hi, I have a Xsara Picasso 2009 diesel with the 1.6hdi 9hx engine. There is a small amount of bright yellow liquid bubbling away around the one of the injectors from when I start the engine from cold, and increases as the engine warms up. Also as the engine warms up, the far left injector area starts to make a chuffing sound. What is going on? Any ideas would be welcome. Thanks :?-?)
coatess
Posts: 5
Joined: 09 Jan 2022, 18:20
x 3

Re: puddles and bubbling around injectors

Unread post by coatess »

Also there is a smell of diesel exhaust fumes inside the car when you put the fan on.
PaulC5
Donor 2024
Posts: 1062
Joined: 06 Jun 2023, 15:26
x 263

Re: puddles and bubbling around injectors

Unread post by PaulC5 »

Likely the injector to cylinder head seals are leaking. I would not leave it long before fixing since you can end up with a lot of carbon around the injectors making them difficult to remove.
Steve Walsh
Donor 2024
Posts: 645
Joined: 25 Oct 2019, 07:20
x 446

Re: puddles and bubbling around injectors

Unread post by Steve Walsh »

Pull injectors out, clean the seats thoroughly , might need a injector reamer to remove carbon, fit new copper seals and torque to the spec. I had a mates 2 litre hdi recenttly that had 2 injectors leaking for a few months and it took me a day with a hammer and chisel to get all the carbon off th head.
Thanx to all the admins & knowledgeable people that make this the best forum on the interweb. BUT COME BACK MARC , We miss you! =D> =D> =D>
coatess
Posts: 5
Joined: 09 Jan 2022, 18:20
x 3

Re: puddles and bubbling around injectors

Unread post by coatess »

ok, thank you. I guessed it might be injector seals leaking. Just wasn't confident in my diagnosis.Thank you again.
coatess
Posts: 5
Joined: 09 Jan 2022, 18:20
x 3

Re: puddles and bubbling around injectors

Unread post by coatess »

I am going to replace the seals. What tools and materials should I use to clean up around the injectors before I start?
Steve Walsh
Donor 2024
Posts: 645
Joined: 25 Oct 2019, 07:20
x 446

Re: puddles and bubbling around injectors

Unread post by Steve Walsh »

Depends how bad it is, I would use a small brass wire brush about the size of a toothbrush and brake cleaner as a solvent
Thanx to all the admins & knowledgeable people that make this the best forum on the interweb. BUT COME BACK MARC , We miss you! =D> =D> =D>
User avatar
Stickyfinger
(Donor 2016)
Posts: 11354
Joined: 28 Mar 2013, 21:05
x 1736

Re: puddles and bubbling around injectors

Unread post by Stickyfinger »

Alasdair
Activa, the Moose Dodger