Peugeot

Moderator: RichardW

7893 topics

Page 125 of 158
- Jump to page:
Previous
1
…
123
124
125
126
127
…
158
Next

Announcements

Statistics

Last post

PSA Electrical Diagrams - Wiring & Symbols Codes Index

by GiveMeABreak » 09 Dec 2023, 17:48 » in Diagnostics

PSA Electrical Diagrams - Wiring & Symbols Codes Index

The following will cover most basic equipment, but will exclude later systems & Tech.

PSA Electrical Diagrams Introduction - Function and Constitution of Codes
PSA Electrical Diagrams - Coding of Functions
PSA Electrical Diagrams - Component Coding
PSA Electrical Diagrams -...

Replies: 0
Views: 34299

Last post by GiveMeABreak
09 Dec 2023, 17:48
Citroen, DS Automobiles and Peugeot Official Part Number Requests

by GiveMeABreak » 15 May 2021, 13:55 » in Citroën
1

…

133

134

135

136

137
First post

Please make all your Citroen , DS Automobiles or Peugeot Parts Requests on this thread

This thread is only for donating members who wish to request official part numbers or Parts Diagrams.

Please don't post technical queries or ask 'how to' questions here. Create a thread in one of the main Citroen / Peugeot Forums for these queries....

Last post

DTS Front door seal.png

(13) Front Sealing Panel
Left, part: 9819576080, £29.26
Right, part: 9819575980, £29.26

DTS Rear door seal.png

(40) Sealing Panel
Left, part: 9817691680, £23.44
Right, part: 9817691880, £23.44
Replies: 2052
Views: 582781

Last post by GiveMeABreak
Today, 11:09
Airbag, Dashboard, Seat Belt & Airbag ECU Repairs

by GiveMeABreak » 24 Jun 2020, 17:01 » in Useful links
1

2

3

4

5
First post

Just for members to be aware that airbagteam.com based in the UK are offering a 10% discount to FCF members on any of their services.

The FCF does not endorse any company directly, but thought this would be of use to members.

Full details of their services and the discount can be found here:

Airbag, Dashboard, Seat Belt & Airbag ECU Repairs

Last post

Re the 407 door seal issue and airbag warnings, after a few days of rain and testing with the hose, I gave up as water was still pooling on top of the bottom door seal and then running inside the car.

My solution was to put a few holes thru the seal with a leather hole punch tool which seems to allow the water to exit (the door seal gets squashed...
Replies: 64
Views: 80424

Last post by 407
07 Mar 2024, 23:42
Important Information concerning access to PSA parts data

by xantia_v6 » 19 Mar 2020, 04:19 » in Forum News, Announcements and Issues
1

2

3

4

5

6
First post

As some of you may already have realised, PSA (Citroen, DS Automobiles & Peugeot) have this week (from 16/03/2020) decided to close off free access to parts information.

The public version of PSA's ServiceBox, which is the official source for parts and information has had a freely accessible parts system for registered garages, and individual...

Last post

Please note: This Thread is now Locked.

Please Make All Your Citroen or Peugeot Parts Requests Here

All parts requests from this topic have been moved there.
Replies: 88
Views: 120547

Last post by GiveMeABreak
14 Nov 2021, 07:21
New PSA Heritage Parts for Classic Cars

by GiveMeABreak » 11 Oct 2019, 16:18 » in Citroën

First post

Parts for Classic / Older Citroen, Peugeot Renault Vehicles

This may be of interest to Members with older vehicles where getting parts is a struggle and for those not already aware of the site.

PSA are embarking on a project to provide some supplies of original and re manufactured parts for older vehicles and classics, and have made it a...

Last post

I'm trying them for anything showing up as NFP now.
Sometimes hit lucky.

Replies: 3
Views: 35445

Last post by white exec
24 Jan 2020, 16:49
Revised Easydiagnostics Discount Procedure

by GiveMeABreak » 03 May 2018, 17:22 » in Forum News, Announcements and Issues

Please note that there is a new procedure in place for members wishing to take advantage of a 15% discount off products from Easydiagnostics.

The old discount code that was entered into the checkout is no longer valid, as a result of the code being propagated over the Internet.

After discussions with Jim from ED today, we have agreed a new...

Replies: 0
Views: 37743

Last post by GiveMeABreak
03 May 2018, 17:22

Topics

Statistics

Last post

306 TD heater controls/AC

by grattsim » 31 Mar 2005, 16:45

First post

I've let a peugeot mecahnic look and he couldn't find the problem in the hour I allowed. He expects it could be a connector as the unit doesn't seem to be getting any power.
Does anyone know the locations of the connectors/wiring leading to the temperature and blower control dash?
Would mine be linked to the ignition switch as well?
Any known...

Last post

When I try to switch the AC on or the internal circulation nothing happens, I have no fans and am unable to change the temperature setting.
I've checked all the fuses in the passenger conpartment and all seem ok. i've also checked to see if any connectors are lose and couldn't see anything.
It was imtermittant for a few hours before it stopped.
I...

Replies: 7
Views: 478

Last post by grattsim
30 Mar 2005, 18:38
L reg peugeot 405 td

by axle56 » 30 Mar 2005, 07:05

fuel gage somtimes show ok other times not at all any ideas

Replies: 0
Views: 215

Last post by axle56
30 Mar 2005, 07:05
306 exhaust

by mgoodlad » 29 Mar 2005, 17:07

First post

I have a 1996 1.9 TD spinnaker and there is no cat on it - would guess his is the same.
Regards
Michael

Last post

Hi Guys,
Does the standard exhaust on a 1995 306 TD have a catylst, as my son's peugeot that he recently bought has a modified exhaust straight from the exhaust manifold to the rear box. He wants this to be changed back to standard but he's unsure if he needs a cat centre of not.

Replies: 1
Views: 277

Last post by sooty
29 Mar 2005, 04:56
Flywheel Timing Hole on 306 Turbo Diesel

by mbunting » 28 Mar 2005, 21:21

First post

Yes, it is behind the starter motor.
I found on my Xantia that removing various oil breather pipes, and having a general grope around first helped me !

Last post

Hello,
I am trying to change the timing belt on my 1998 306 Turbo Diesel. I have lined up the timing holes in the camshaft sprocket and the injection pump sprocket. According to my Haynes manual I now need to line up my flywheel by inserting a pin through a hole in the cylinder block in to a timing hole in the flywheel. The problem is that I...

Replies: 4
Views: 463

Last post by popperjoe
28 Mar 2005, 20:33
re:rear disk pads

by tonespeed1999 » 27 Mar 2005, 16:52

First post

no special tools required,the piston will need to be screwed in,quite easy using a screw driver and grips.

Last post

hi all, i have a pug 306 1.8, was just wondering are there any special tools required to change the rear disk pads on a 306 hatchback

Replies: 1
Views: 296

Last post by robins1uk
27 Mar 2005, 00:16
306 Lower arm P Bushes

by tonespeed1999 » 27 Mar 2005, 18:11

First post

i would consider changing the front bush on the arms aswell,if the rears are worn, then the fronts will be weak!
the bushes from GSF are normally OE spec,but in a different box.
take your car to a good tyre outlet that can do four wheel geometry check,that will tell you if theres a problem ie: caster/camber etc.

Last post

I replaced my lower arm bushes recently and all was fine other than major brake judder.... once the judder was fixed ( new discs) the front suspension has felt very loose.. ie when i slam the brakes the car thuds and the steering wheel straightens up sharply...
How much flex should these bushes provide? I can jolt the front wheels back a tad with...

Replies: 3
Views: 462

Last post by thedadio
25 Mar 2005, 23:24
306 1.9 D Turbo common problems

by rossd » 24 Mar 2005, 18:10
1

2
First post

Its an XUD, it'll go for ever and ever! I've just sold my old N-reg DTurbo, It was on 112K and still going like the day it was new. Had to replace the radiator cos it leaked from road slat corrosion, btu that was about it. Did lots of preventative maintanaince on it, but it was very very reliabe. Oh and the glowplugs went a couple of winters ago....

Last post

Hi All,
I am trying to decide whether or not I should sell my P reg 306. I've had all the central locking motors changed (thankfully under warranty), a new power steering pump, the turbo pressure sensor pipe, and finally the rear brake cylinders.
I was wondering if there are any common problems which I've not had repared yet! It's done 75k so the...
Replies: 26
Views: 3999

Last post by chindu
24 Mar 2005, 16:48
How much will a 406 clutch cost?

by ActivaV6uk » 24 Mar 2005, 00:07

First post

Fitted it should be about £300 if you shop around. As for just the clutch to fit your self check GSF's main site there about the cheepest you will find - and it helps fund this forum :).
Andy

Last post

My 406 Td has got major clutch slip, It's time for a new one. does anyone know how much it will cost, I have heard horror stories,
A walker

Replies: 2
Views: 470

Last post by awwalker
23 Mar 2005, 23:45
1996 306 TD knocking from rear

by rossd » 23 Mar 2005, 16:54

First post

Easy, its the rubber mountings where the axle joins the chassis. Mine went with these symptoms. Jack the car up so that the weight of the axle is hanging from the car, e.g jack the car from the chassis not the axle. If its the rear mounts that have gone, they will pull apart from the weight of the axle. If not, its the more expensive front passive...

Last post

Have a 1996 306 1.9TD Spinnaker with 78,000 miles. Rear suspension started to groan and I have pinpointed that to the rear right joint where the trailing arm comes out of the axle bar. Will have to get that seen to...
But there is another noise, sounds like the rear left - it is a rapid knocking when going over uneven surface - seems to be more...

Replies: 1
Views: 345

Last post by mgoodlad
23 Mar 2005, 14:46
406 heater problem - can you help

by tonespeed1999 » 24 Mar 2005, 01:18

First post

sounds like the main climate control curcuit board is faulty.
the 306 used to suffer with the same problem,cold air on one setting and hot air on the next.

Last post

I have a 1997 (R) 1.9 GLX TD. The heater only blows hot air out when the temp is set at 30Deg, but blows cold out between 14 and 29. Theres no fault in the fan, as that works full range in both manual and auto, and no fault in the A/C.
I had a radiator leak 2 weeks ago and put in some radweld and topped up the coolant.
I've read about other...

Replies: 3
Views: 551

Last post by RobW
23 Mar 2005, 11:16
306 Poor Handling

by bad driver » 23 Mar 2005, 17:58

First post

I would say the poor cornering, wandering and odd steering is one of 3 things, track rod ends, drop links or shocks, with the car jacked up can you feel any play in wheel movement if you shake it by hand?
I would do the droplinks anyway and the track rod ends as they are cheap and easy to do, if that doesnt cure it then might be time for a new...

Last post

Hi i need some help. I have 1996 306 Dturbo 132000 miles. Just done the Following
Lower Bushes, Balljoints, Bearings..
Still getting wheel wobble, wandering and odd feeling steering. Plus i get a rumbling coming from passengers front, sounds to me like worn anti roll bar bushes or links, but could these sounds and poor handling be attributed to a...

Replies: 2
Views: 494

Last post by thedadio
23 Mar 2005, 02:17
Dash

by bad driver » 23 Mar 2005, 18:00

First post

remove steering column shroud, then the trim in front of the clocks and then the clocks come out. Very simple to do.

Last post

I've lost a dash light behind the fan Speed/hot&Cold/ dials how do I get behind the dash to sort the problem?
I have a 1999 306.
Cheers
EZ

Replies: 3
Views: 443

Last post by ezee_duzit
22 Mar 2005, 14:25
Peugeot 306 - 1.6 vs 1.8

by born2die » 21 Mar 2005, 16:33

First post

try find the car you want and follow the prompts that should tell you ie this is for a 1997 p plate 1.8xs
Emissions and Fuel Consumption Dimensions
MPG NA Length mm NA
Tank capacity litres 60 Width mm NA
Litres/100km NA Height mm NA
Noise level dB(A)(moving) Wheelbase mm NA
Euro standard NA Kerb weight kg 1090
Particles g/km NA
HC & NOx...

Last post

My mate reckons that an L Reg 1.6 Peugeot 306 is actually quicker than an N Reg 1.8XT Peugeot 306 - Is this true?
I cannot see how it possibly can be (unmodified) - it's not as if the weight would be any different.
Any ideas?
Is there a website I can look up?
Cheers

Replies: 5
Views: 1723

Last post by Q4Legend
21 Mar 2005, 15:27
Juddery 306 (Solved!)

by Stuart McB » 22 Mar 2005, 00:32

First post

£400, I take it that you could have a regular exhaust fitted instead ?

Last post

If you look deeper into the forum, you will see my call for help with a 306 XSi very juddery to pull off, needing a lot of rev's. People suggested stepper motor's and whatnot, but now its solved!
The exhaust had a slight blow. I took it to Pro-Speed exhausts in cardiff (south wales) for a complete new £400 system, and bingo! Problem solved. Turns...

Replies: 1
Views: 423

Last post by Linchpin
21 Mar 2005, 14:47
air con filter

by robins1uk » 21 Mar 2005, 14:39

First post

quote: Originally posted by robins1uk

hi all, is there a air filter for the air con system, as recently turned the system on and the air smell's very dusty, i have a x reg 306

Last post

hi all, is there a air filter for the air con system, as recently turned the system on and the air smell's very dusty....

Replies: 3
Views: 435

Last post by robins1uk
21 Mar 2005, 14:38
Flexi brake hoses for 405?

by PowerLee » 21 Mar 2005, 00:40

First post

Hi
You might find it a lot cheaper to go to your local Bosch Automotive dealer for a new ABS sensor then a Peugeot dealer.
Also when you get the new sensor, DONT peel the white paper off the end of it, Thats there to set the correct airgap.
Fit the sensor so the paper is touching the toothed rotor, Now spin the wheel, The paper gets removed by the...

Last post

Hi,
Had the wheels off today to check the ABS sensors - one is knacked so off to Pug tomorrow...
But whilst looking the brakes over the rear flexi hoses are starting to crack. At least the rear top one is - furthest from the caliper (got rear disks BTW). On both sides. Now I know I can get new ones from GSF or somewhere fairly cheap but as I will...

Replies: 1
Views: 293

Last post by dvhttn
21 Mar 2005, 00:36
Is New Battery Faulty??

by PowerLee » 20 Mar 2005, 18:33

First post

Hi
I also made the mistake of having the same Halfords battery as you & my 405 didn't like it one bit.
For some reason it didn't like the Halfords battery, I ended up getting a Bosch silver battery for the 405 TD or 406 V6, Much bigger then the silly little thing recommended for the 2 litre 8 valve.
Peugeot battery terminals are best described as...

Last post

Hi, I'd bought a new Battery from Halfords about 7 months ago, it was one of those heavy duty with a 4 year Warrantry, I've just noticed about 2 weeks ago there's this white and light yellow powdery stuff on the bottom of the battery tray and on the battery clamp it's quite thick, someone told me the battery is leaking acid and it's due to that...

Replies: 6
Views: 531

Last post by S.Dhuper
20 Mar 2005, 18:06
406 1.9TD Gearbox

by bad driver » 21 Mar 2005, 23:36

First post

from trhe passenger side arch theres a plug, looks like a big nut through the outer casing, remove and the oil should be full to the plug level.

Last post

Hopefully an easy question this - how do I check the gearbox oil on my 1998 1.9TD 406 estate.
Thanks
Paul

Replies: 1
Views: 379

Last post by Paul 123
20 Mar 2005, 16:22
rear Sag 2

by ralph » 21 Mar 2005, 17:29

First post

I await responses to this with interest too - I need a complete rear end for my 205 after it failed its MoT.

Last post

Morning all - Thanks for previous responses (rear sag) - the advice is good and I am now looking at replacing the complete suspenson (without the disc brakes) - most of the second hand units available are off the car - is there any way of making sure I choose a good unit - are there any measurements I can take ? anything in particular to look for...

Replies: 5
Views: 518

Last post by Ross
20 Mar 2005, 12:16
406 exhaust clamp..... HELP!

by tonespeed1999 » 20 Mar 2005, 01:44

First post

your local HALFORDS should have a parts desk that should be able to sort the correct part for you, if not,look in your YELLOW PAGES for KWIK FIT or similar they should sell you a clamp over the counter, shouldnt cost you more than £6.00

Last post

My 406 2L 16v saloon has been 'blowing' for a few weeks now, so today I finally jacked it up and had a butchers underneath. Found the clamp shaped like a ring was loose, so tightened it....... and it snapped due to corrosion . Went to Halfords but couldn't see this type of clamp there, only some kind of thick half moon with a bent bit of bold in...

Replies: 2
Views: 449

Last post by Gotta New Pug
19 Mar 2005, 00:51
306 Dturbo Front Passenger Side Knocking

by ralph » 17 Mar 2005, 16:43

First post

Are you sure the lower suspension arm balljoint is secured properly in the hub carrier?
The ball joint has a groove so the securing bolt can be fitted and hold the suspension arm in place.
I don't know what you mean by bending metal back into place, but Haynes should give torque settings for all suspension bolts.
I'd check the fitting of the...

Last post

Hi i have the above car... Replaced Arm bushes, ball joints, wheel bearings, since replacing all ive had wheel wobble when steering and ****e handling, ie car wandering, having to constantly correct steering. Also there is a kind of knocking coming from the front passenger suspension area, louder, quieter with different speeds, only happens after...

Replies: 2
Views: 448

Last post by thedadio
17 Mar 2005, 14:47
V6 changes

by paradox » 17 Mar 2005, 07:33

First post

Possibly (in part?) due to the variable valve timing introduced?

Last post

Does anyone know what changes were made to the V6 3 litre engine to increase its power output from 194HP in 1998 to 210HP in 2000?

Replies: 3
Views: 445

Last post by FrenchLeave
16 Mar 2005, 20:23
Climate Control Dash Removal

by PowerLee » 16 Mar 2005, 15:10

First post

Isnt there a couple of screws at the top as well? hidden behind the switches & blanking plate?

Last post

How the monkeys do you get the climate control dash bit out of a 406 GLX? I took radio out, removed 2 torx screws from under c/c dash, but still seems dead set on staying put
Anyone had this out before, cos I need to change a few bulbs! Any help would be fab.....
John

Replies: 1
Views: 369

Last post by Gotta New Pug
16 Mar 2005, 06:13
206 Oil filter Changing

by tonespeed1999 » 15 Mar 2005, 23:46

First post

very easy to change,find a socket that will fit the top,undo filter,pull off old filter,fit new one and the new seals.screw filter assembly back into housing, tighten to 20nm,wipe off excess dripped oil,start engine,let it tickover until oil light goes out,recheck oil level.
job done!

Last post

I have a 2001 206 1.4 which seems to have a strange sort of oil filter. It is not the usual metal screw on sort, but it seems to be a paper cartridge type which hides under a large black plastic cover. Has anyone changed this type of filter and if so could you let me how to do it as I don't want to get oil every where & not fit the new one...

Replies: 4
Views: 1765

Last post by JohnWB
15 Mar 2005, 18:33
Rear Wiper Arm

by fastandfurryous » 16 Mar 2005, 00:20

First post

presuming this is a 306. The arm will be main dealer, or a scrappie. To remove the nut use bucketloads of wd40 applied at regular intervals, and when it does finally move, work the corrosion out by alternatly undoing it and then doing it back up again, whilst continuing to apply more wd40. It makes a mess, but at least it shoudn't shear off.
You...

Last post

Whilst giving the car a wash at the weekend, I decided to change the wiper blade on the back around. Trying not to force it to hard as the wiper arm is only plastic but the blasted thing wouldn't come off. I got a bit frustrated and did break the plastic wiper arm? Does anyone know where I can get hold of one of these from, Peuegot dealer are...

Replies: 1
Views: 336

Last post by ezee_duzit
15 Mar 2005, 17:47
Water Leaking

by tonespeed1999 » 15 Mar 2005, 17:39

First post

engine size,year?

Last post

i have pug 306 not drove it for a while. but drove it the other day and found water was leaking from the back of the engine causing it to over heat. any idea where it could be leaking from please.it doesnt seem to be from the water pipes. could it be the head gasket as is seems to be coming from between the head and engine block but cant see...

Replies: 2
Views: 287

Last post by jhsvp
15 Mar 2005, 16:06
noisy petrol engine/clatter

by bikeboyz » 14 Mar 2005, 23:49

First post

sounds like the new gasket is aligned incorrectly and the tapping you are hearing is a piston hitting the edge of the gasket each stroke if the noise was not present before.

Last post

I have a 306 1.6 8v which I've had for about 4 months. Soon after I got it the head gasket went, and since then the engine has been pretty noisy, and increasingly more so I think.
It is hard to describe sounds, but at idle it is a sort of loud clicking, but on acceleration takes on a more metallic clatter related to engine speed, and becomes too...

Replies: 7
Views: 496

Last post by TomH
14 Mar 2005, 21:39
406 owners with haines manuals, your help please!

by batwad » 16 Mar 2005, 19:07

First post

Your local public library will probably have Haynes manuals. I popped into mine for an hour and had a look over the HDi sections of the 206, 406 and Xsara when I got my 306 HDi. Taught me how to get the fuel filter out, that did

Last post

I feel cheeky for asking but i dont want to go and buy one for just one job. Ive got a 406 2.1 TD engine and loom that i'm about to fit to my xantia. i really need some of the wires discriptions in the loom.
I did pay €19 to go onto the peugeot lazer system for 6 hours but I wasted the money as they dont cover this engine in the 406 (complaint...

Replies: 1
Views: 387

Last post by ActivaV6uk
14 Mar 2005, 20:59
405 heater fan only works on max.

by PowerLee » 14 Mar 2005, 21:34

First post

Hi
It will be the resistor pack that is attached to the blower motor, It has shorted to earth.
Either fix this quickly or unplug the motor, If you leave it the relay for the blower fan gets too hot & starts to melt the wiring loom behind the plug!
Pop down the scrapyard & search out any 405s, 306, 406, 605 etc for a decent motor.
Also check out...

Last post

Hi,
Heater fan on my 405 (pre-facelift) diesel turbo only works on max. I am getting hot and cold air so it's just the fan. Searching the archives the only vaugly similar problem was on a 405 TD. The advice was change the fan. Checking the Haynes manual these are fairly easy to get at (sounds like the same as my old 205) and also have a motor...

Replies: 5
Views: 445

Last post by dvhttn
14 Mar 2005, 03:57
clutch help

by bad driver » 12 Mar 2005, 15:10

First post

Yes that clutch will fit as long as its the same method of operation IE push or pull. I know the engines are the same just not sure if gearboxes are the same in the 405. Easy way to tell is the direction the clutch cable runs to the thrust bearing arm. If its in a holder on the front of the gearbox and running backwards to the arm then its a pull...

Last post

Just to help me clarifiy. my car 405 1.9td (m reg) now with a suspected slipping clutch due to diesel spill (nothing to do with the 193k on the clock). stupid place to put a fuel filter if you ask me.
Symptoms: when i floor it in 3rd the rev's shoot up from just above 2k to just over 3k and then back down a bit with a slight lose of power during...

Replies: 2
Views: 441

Last post by caveman_si
12 Mar 2005, 04:49
206 low temp and water leak

by tonespeed1999 » 12 Mar 2005, 03:07

First post

70 degrees sounds about right in this weather.

Last post

Hiya
My girlfriend has a 206 1.4 LX 2001Y.
The other day, on way to work on motorway, the engine diagnostic light came on. She stopped and after 5 mins set off again, and the light didn't come on again.
At work she checked the water and it was low. It took about litre to fill it up into the expansion tank.
Now though, the car won't run above about...

Replies: 2
Views: 353

Last post by DaveC
11 Mar 2005, 23:32
405 remote plip

by tonespeed1999 » 11 Mar 2005, 17:12

First post

if you remove the reciever from the head lining there should be a number on it.the last one i bought afew weeks ago for a customer who had a 306 cost approx £48,they also might need the chassis number aswell.

Last post

405 GLD
Just bought car with no remote for central locking. Does anyone know the cheapest way of getting the system to work - replacement remote and reprogramme maybe?
Was wondering how the infra-red cover on roof console unclips, so I can find out what receiver I have in order to buy another one complete with remote on ebay.
Am I right in...

Replies: 4
Views: 345

Last post by mauro2232
11 Mar 2005, 16:42
Philips CD shorting out

by bad driver » 11 Mar 2005, 19:15

First post

Sounds like a faulty stork or possibly a cracked circuit board in the stereo itself, why not just put an aftermarket head unit in with working buttons. Most the sony ones you can get an adapter for to use with the stalk.
Nice to hear the 406 is comfortable for long periods, I'm a PH driver so looking at buying a 406 at the moment.

Last post

My 406 is a 99 lx which come standard with a Philips 026 CD player.
My problem is that when listening to the radio I have all the speakers working & only the push forward Mode change on the Control stick, but sometimes all the function work and some times only the mode forwards works, (Depending on the road surface)if you see what I mean.
Now as...

Replies: 3
Views: 293

Last post by jjandrj6679
11 Mar 2005, 14:22
Alloy wheel bolt taper on 405?

by matt » 11 Mar 2005, 14:23

First post

As far as i know,they dont.Its a 90 degree shoulder,the alloy wheel bolts on my 405 and 205 are all the same.

Last post

Hi,
Looking at getting some alloy wheel security bolts for the 405. The seller says they fit alloys with a 60 degree taper. Any idea if the original fit alloys have this taper? (I'll be able to measure it tomorrow but if someone knows that means I don't have to take a bolt out ..... :-) )
Cheers

Replies: 5
Views: 396

Last post by dvhttn
11 Mar 2005, 13:50
306DT turbo compatibility

by tonespeed1999 » 11 Mar 2005, 03:39

First post

im sure one will fit,just make sure the exhaust manifold holes line up.have a look at some scrap citroen zx 1.9 TDs, an ideal donor.

Last post

Hi all, looks like a good forum you have here. I have a question about my peugeot 306 diesel turbo (n-1996). After much difficulty, i found that my car had a KKK turbo (now blown). Is it possible to replace a KKK turbo with a GARRETT T2. Any advice or extra information would be greatly appreciated.

Replies: 1
Views: 324

Last post by graham1982
11 Mar 2005, 00:15
pug stereo problems anyone help asap?

by tonespeed1999 » 10 Mar 2005, 23:57

First post

cant be 100% sure!is it a clarion unit?
try leaving the ignition and stereo turned on for at least 30 mins.
the stereo should reset it self enabling you to put in correct code!

Last post

hya,
i've a 405 quasar diesel the radio has been disconnected and i've entered a wrong code in 3 times and now the radio is showing SECURTY on the display,but i've just rung the dealer and they've given me the right code,is there anyway of clearing the SECURTY so i can enter the RIGHT code
any help/advice will be gratefully recieved
cheers
neil

Replies: 6
Views: 413

Last post by neilsxm
10 Mar 2005, 23:46
peugeot 307 1.6l 2002 engine fault !!!

by tonespeed1999 » 10 Mar 2005, 20:29

First post

sounds like its gone into limp home mode , youll need to contact your peugeot dealer or a specialist with diagnostic equipment who can read the fault codes.

Last post

my car does not start, there are lights on the dashboard, the alarm does not turn on or off. there is an error - 'economic mode active'.
Please help!!!
What do i do??

Replies: 2
Views: 317

Last post by wonderd
10 Mar 2005, 19:38
ABS

by fastandfurryous » 10 Mar 2005, 21:21

First post

Does the lamp go off, and then come back on again after moving off, or does it never go out? It *could* be any one of the probelms you've listed, although the favourite is a dead wheel sensor. This could either be a dead sensor, or broken wires to it. The location of the wires does lend itself to corrosion, and hence the ECU thinks it sees a dead...

Last post

HELP!! Abs warning lamp stays on when driving,the big problem being my mot tester has just noticed it!Could it be a relay or control unit or a dodgy sensor?Cheers matt

Replies: 10
Views: 780

Last post by matt
10 Mar 2005, 19:28
Wiping

by tonespeed1999 » 10 Mar 2005, 16:17

First post

any good quality blade is ok.have you tried cleaning the screen and wiper rubber with screen wash additive.

Last post

Quick query. Any recommendations for wiper blades? I have Bosch fitted at the moment but they have often vibrated against the screen which is irritating to say the least! I have always gone for ones with a spoiler.
I've fitted Halfords own brand in the past which seemed fine but didn't last very long. Any others?

Replies: 11
Views: 673

Last post by yangreen
10 Mar 2005, 16:13
Rear Sag

by PowerLee » 10 Mar 2005, 12:39

First post

Adjusting rear torsion bars is possible, But if you have never done one before, You could be letting yourself in for a major headache! Thats why the garages didnt wont to know!
The 106 GTI had rear discs fitted
Give these people a ring & ask them

Last post

On my L reg 106 diesel the rear offside suspension appears worn as the car does not sit square when parked in fact it has a fair amount of lean - Haynes makes passing comment about the torsion bar arrangement and adjustment to the same - I have tried a couple of garages who really didnt want to know - has anyone adjusted the ride height via...

Replies: 8
Views: 637

Last post by Ross
10 Mar 2005, 03:27
Oil pressure

by arry_b » 10 Mar 2005, 01:01

First post

I had a similar problem with an old Triumph Spitfire I fitted a gauge to. I priced up crank regrinds, gaskets etc and it wasn't cheap!
I sorted it out by taking the gauge out again, and not worrying about it.
The engine ran for many thousands of miles after that!
(actually, your figures aren't too bad)

Last post

What kind of pressures should Oil be at? Bit random I know but Ive just put a gauge in a turbo diesel and it seems a bit low and random, not sure if it indicates a fault or if its normal with the chaiin oil pumps.
Basically start car and its around 25psi, if you rev and hold so its on boost it climbs to around 47psi then drops with the revs,...

Replies: 2
Views: 293

Last post by bad driver
09 Mar 2005, 23:30
406 2.1TD

by PowerLee » 09 Mar 2005, 23:00
1

2
First post

The 2.1 isnt a bad engine, But the gearbox & clutch are different to every other 406 & can be expensive to fix.
Also second hand instrument panels are like gold dust & highly sought after.
I myself wouldnt touch a 2.1 TD engine, Go for the 1.9, Loads of these about & cheap to fix when they do go wrong.

Last post

Hi all
Thanks to an inconciderate Ford Focus driver my 406 GLXTD has been written off in a big way.
I am looking to replace and have seen a 1997 R reg 406 executive 2.1td for sale with all the whistles and bells.
Not wanting my head to be turned with the leather interior and all the goodies that go with it I need to know what the engines are...
Replies: 15
Views: 2264

Last post by fatbugger
09 Mar 2005, 22:52
306 alarm siren

by PowerLee » 09 Mar 2005, 22:57

First post

Hi
You could just pop along to a place like Maplins & get another key switch.
The 2 wires would just connect up to the 2 terminals on your new switch.

Last post

when i got my 306, the siren was turned off by the key, i dont have one to turn it back on with, so i went to pug today and asked about getting one, only to be told they dont sell them separately, and id have to buy a whole new alarm! so no way. i was just wondering, if there was anyway of bypassing the key and maybe putting in a switch instead?...

Replies: 6
Views: 585

Last post by moomin
09 Mar 2005, 19:24
405 Ignition timing

by tonespeed1999 » 09 Mar 2005, 17:12

First post

thats right, youll have to try and move the pipes/wires abit and struggle basiclly

Last post

Hi all
Can anyone offer advice on how a 405 1.9 8 valve should be timined (ignition)
I heard it needs to be done through a window in the bell housing but mine covered with pipes and cables.
Many thanks

Replies: 2
Views: 384

Last post by delboy
09 Mar 2005, 14:33
405 outside temp sensor

by PowerLee » 09 Mar 2005, 12:45

First post

Hi
Have a look under the passenger side door mirror, Your looking for a small raised black button.
Thats the sensor, You need the mirror glass off to change it, Tilt the glass all the way upwards, Look through the gap at the bottom between the glass & the housing, See that wire locking clip? Unclip that & the glass will lift off.
The sensors are...

Last post

Does anybody know where the outside temp sensor is on 93 405 stdt?Mine never read correctly but has now stopped working completely.Thanks.

Replies: 2
Views: 446

Last post by matt
09 Mar 2005, 03:40
306 handbrake adjust

by PowerLee » 09 Mar 2005, 00:31

First post

Hi
First do you have discs or drums on the back?

Last post

Please can anybody help!!! I'm trying to adjust my handbrake on my 1998 306, and I don't know how to. I've looked underneath the car and removed the heat sheild but can't seem to see the adjuster....
Can anybody please help
Cheers ady

Replies: 5
Views: 402

Last post by ady973
09 Mar 2005, 00:26
knocking diesel

by tonespeed1999 » 08 Mar 2005, 23:21

First post

possibly the fault lies with the mixing of wrong components,ie,camshaft,fuel pump and injectors.
sounds like youve got a timing/fuel problem.

Last post

Would burnt valves cause excessive diesel knock?
engine is from xantia, now in 306 xldt and the pump has been changed for the 306 unit, but its a real pain to start, and when it does start, it idles ok, but whenever you try to rev it, it knocks quite a lot, although it doesnt sound like a normal diesel knock, pump timing and valve timing seem to...

Replies: 7
Views: 680

Last post by martyb2
08 Mar 2005, 20:09
Please advise on symptoms - wheel bearing?

by Dave Burns » 08 Mar 2005, 23:32

First post

Sounds more like a gearbox bearing in trouble, wheel bearings typicaly start to knock when they are on the way out, and will do so at all speeds, if it is a wheel bearing the direction of travel isn't a reliable pointer as to which one it is, it depends where abouts the damage is on the races.
Dave

Last post

Hi all,
My 1991 205 GT (God bless it!) started playing up the other day whilst driving up the M3. At high speeds (around 60 and upwards), when coasting (clutch in or out) or decelerating, the car would make a pretty awful whining sound that filled up the whole cabin. Under acceleration, it was fine. At lower speeds it's fine. Additionally (needed...

Replies: 3
Views: 424

Last post by joshm
08 Mar 2005, 18:20
Head Skimming

by fastandfurryous » 08 Mar 2005, 16:45

First post

I know on the XUD heads there are 2 recessed patches, one at either end of the head, which work very much like the tread depth guages on tyres: you can contunue to skim the head until the recesses are flush with the surface of the head. I'm guessing, but I would suspect the XU petrol probably has the same recesses built into it. They are about the...

Last post

Does anyone know how much material can be taken off a head? The head gasket went on my 205 1.9 Gti and I know that the head has already been skimmed once before. I'd like to know how much more material I've got to play with as I'd like to skim it again before it goes back on. Help would be appreciated, cheers.

Replies: 2
Views: 421

Last post by StuR
08 Mar 2005, 15:45
406 Coupe trip mileometer bulb replacing

by tonespeed1999 » 08 Mar 2005, 23:29

First post

yes,its as easy as that.

Last post

Can someone please advise how to change the little bulb for the trip and mileometer on my 406 coupe.
Is it a case of removing the 3 torx screws in the dash cowl and then pulling it out or is there a different way.
Thanks in advance

Replies: 1
Views: 222

Last post by tpress
08 Mar 2005, 00:44

7893 topics

Page 125 of 158
- Jump to page:
Previous
1
…
123
124
125
126
127
…
158
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum