Diagbox question

[Leike]

Protection-accesses

[Leike]

Driving assistent

[Leike]

Driving comfort

[Leike]

Miscellaneous

[Leike]

Telematic unit rneg2010 customer options

[Leike]

Telematic unit rneg2010 other functions

[Leike]

I have all the parameters in a excel sheet, if you tell me how to send those files, maybe is it easier to correct the settings

Very much, thank you in advance!

[paddypaws77]

I have sent you some PM,s
Gelukkig nieuwjaar!

[GiveMeABreak]

This is going to take some time, so leave it with me and I'll look at it when I can to see what is not right.

[GiveMeABreak]

Ok, the following are all incorrect and need changing to the values I specify:

BSI ECUs Present

Navigation I can't determine this, so if you have the following:
Vehicle having an instrument panel displaying a maximum speed of 230 km/h or 150 M/h on a white background and with a large display matrix Leave it as present, otherwise change to absent.


Power Unit

Oil temperature sensor option Change to Absent
Supplies Protection & Management Unit (BGPA) This should be YES
Authorisation of a surge of power at the terminals of the fuel supply pump ( reservoir) This must be YES.

Lighting

Presence of a right reversing lamp: Should be set to NO
Presence of parking lights: Set to NO

Driver Information:

Presence of a red LED for Power Steering warning: Must be set to YES
Display of the rear seat belt reminder warning when a rear door is opened or when the ignition is switched on: Must change this to NO
Use of the vehicle movement information to detect fuel filling operations: Change to YES

BSI Driving Assistance
Time of response from the engine ECU to the BSI when starting the vehicle speed control: Change to 00,6 seconds.

BSI Driving Comfort
Activation of the blower load reduction strategy: Change to ABSENT

Miscellaneous

Presence of configurable button: Change to NO
Presence of an estimation of the electrical consumption when stationary: Change to YES
Type of climate: Change to 'Temperate (-17°C to +37°C)', which includes Netherlands.
Sharing of data between the telematic unit and the multifunction screen: Change to NO

[Leike]

Thank you mark,

Unfortunately I did not have the time yet to changed the items!
When I do, I let you know

[Leike]

It is incredible!

I changed the settings like you suggested marc, and with screenshots from Phil.
No warning lights on, the red licht from the parkingbrake has come on, daylight lights working again, cornerlightning is ok, etcetera

I am so thankful too you both, for helping me out.


There are just 2 things I wonder.

My oil level blinks with 2 stripes in the display. Maybe I have to wait several starts?
I already changed the level sensor, and there is enough oil in.


And the ventilation blower on the second row of seats, does not work. In the climate control, the rear ventilation is on.
Is this also a setting?

[GiveMeABreak]

I'll take a look Sunday and check the Climate settings for you.

[connellyg]

Driving comfort

Sorry for reactivating the thread.. are these changing on this screen and are these selections accessable under the BSI section on Diagbox

[GiveMeABreak]

Yes, that is Diagbox - but do not change settings unless you know what you are doing as some options must NOT be changed from default settings, otherwise it can result in you having a non-functional vehicle. There is no UNDO mode! Further, changing a setting to activate something does not do anything except cause malfunctions if the physical system , ECU or Hardware is not there int he first place.

Lastly, be wary that most ECU configuration is locked out now for later vehicles (certainly on later versions of Diagbox 9) without a PSA account and paid access token.