I have been getting a "Worn brake pads" when I first drive away of a morning so I'm assuming they need replacement.
Before I get started, is there any special tools needed such as one to retract the pistons or can I just push them back (jemmies or g-clamps normally work)?
Regards
John
C8 disc pad replacement.
Moderator: RichardW
-
- (Donor 2022)
- Posts: 43
- Joined: 13 Aug 2019, 17:24
- x 4
C8 disc pad replacement.
John
Xsara Picasso VTX 16V
VIN VF7**************[VIN obfuscated, can be read by forum staff]
Xsara Picasso VTX 16V
VIN VF7**************[VIN obfuscated, can be read by forum staff]
-
- Forum Admin Team
- Posts: 37459
- Joined: 15 Sep 2015, 19:38
- x 5743
Re: C8 disc pad replacement.
The front pads can be fitted by pushing the pistons back carefully - but on the rear ones, they need a wind back tool.
Also, be aware that if your brake fluid reservoir is at the max. level, you'll need to take some out after removing the filter, using a spotlessly clean syringe or similar, so as not to cause an overflow of the fluid onto anything when you push the pistons back.
Also, be aware that if your brake fluid reservoir is at the max. level, you'll need to take some out after removing the filter, using a spotlessly clean syringe or similar, so as not to cause an overflow of the fluid onto anything when you push the pistons back.
Please Don't PM Me For Technical Help
Marc
Marc