How to replace rear torsion suspension bushes????
I have really problem that how to replace these bushes - there are 4 pieces each side - maybe somebody have haynes manual and maybe he/she can scan these pictures who show how to to this job. My car is 1996 Pug 106 1.1 and these bushes are really out of service but already I have new ones but I need instruction - best way is some pictures. I really hope that anybody can help me .
How to replace 106 rear torsion bushes????
Moderator: RichardW
-
- Posts: 192
- Joined: 01 Sep 2004, 14:20
-
- Posts: 4
- Joined: 22 Apr 2005, 15:54
-
- Posts: 20
- Joined: 18 Sep 2004, 20:16
Is it the mounting bushes? or the bushes/bearings in the torsion beam itself? if it is the mounting bushes these are done by jacking the car off the road, removing the wheels then from the boot removing the four bolts which attach the torsion beam to the car (support the whole beam on two axel stands)lower it down bearing in mind the break lines then remove the mounts/replace and lift the whole beam back upto the car. All The Best
-
- Posts: 4
- Joined: 22 Apr 2005, 15:54