I have an oil leak from the oil cooler/filter housing, car has over 200000 on the clock. So I will replace the gaskets on it.
I'm also replacing the Turbo. As I am getting an intermittent error on the Turbo P2566 and it has to come off anyway to get to the cooler. I think it may be coming to the end of its life.
1.6 partner teepee (BHY) 2018, taxi.
Was hoping someone could help me with the torque settings for when I tighten it all back down.
I will be replacing 5 and 7 (reference diagram).
Thanks in advance.
Oil cooler gasket replacement (torque settings)
Moderator: RichardW
-
- Donor 2023
- Posts: 2056
- Joined: 30 Jul 2018, 22:11
- x 429
Re: Oil cooler gasket replacement (torque settings)
I think its 25Nm , some one on here might confirm but im sure its about 25
Husky.