Peugeot

Moderator: RichardW

7923 topics

Page 1 of 159
- Jump to page:
1
2
3
4
5
…
159
Next

Announcements

Statistics

Last post

Forum server settings changed

by xantia_v6 » 07 May 2024, 19:01 » in Forum News, Announcements and Issues

First post

Due to excessive server loading caused by some badly behaved 'bots' (automated content collectors), I have changed the anti-ddos settings on the site to be much more aggressive.

This has had the desired effect of reducing the server loading from 100% to about 10% (the other 90% was coming from just 8 IP addresses located in China).

There may...

Last post

I have been keeping an eye on the server performance, and the every 5 minutes same addresses would flood the forum with requests for a few seconds before getting blocked again.

In the last hour they seem to have got bored and gone away.

Replies: 5
Views: 165

Last post by xantia_v6
08 May 2024, 10:30
PSA Electrical Diagrams - Wiring & Symbols Codes Index

by GiveMeABreak » 09 Dec 2023, 17:48 » in Diagnostics

PSA Electrical Diagrams - Wiring & Symbols Codes Index

The following will cover most basic equipment, but will exclude later systems & Tech.

PSA Electrical Diagrams Introduction - Function and Constitution of Codes
PSA Electrical Diagrams - Coding of Functions
PSA Electrical Diagrams - Component Coding
PSA Electrical Diagrams -...

Replies: 0
Views: 37058

Last post by GiveMeABreak
09 Dec 2023, 17:48
Citroen, DS Automobiles and Peugeot Official Part Number Requests

by GiveMeABreak » 15 May 2021, 13:55 » in Citroën
1

…

134

135

136

137

138
First post

Please make all your Citroen , DS Automobiles or Peugeot Parts Requests on this thread

This thread is only for donating members who wish to request official part numbers or Parts Diagrams.

Please don't post technical queries or ask 'how to' questions here. Create a thread in one of the main Citroen / Peugeot Forums for these queries....

Last post

71 is bolt M6 x 1mm x 20mm (part no 692395 @ £1.46).
18 is the clamp, part no 1714R4 @ £10.73
Replies: 2058
Views: 688973

Last post by RichardW
05 May 2024, 17:57
Airbag, Dashboard, Seat Belt & Airbag ECU Repairs

by GiveMeABreak » 24 Jun 2020, 17:01 » in Useful links
1

2

3

4

5
First post

Just for members to be aware that airbagteam.com based in the UK are offering a 10% discount to FCF members on any of their services.

The FCF does not endorse any company directly, but thought this would be of use to members.

Full details of their services and the discount can be found here:

Airbag, Dashboard, Seat Belt & Airbag ECU Repairs

Last post

Re the 407 door seal issue and airbag warnings, after a few days of rain and testing with the hose, I gave up as water was still pooling on top of the bottom door seal and then running inside the car.

My solution was to put a few holes thru the seal with a leather hole punch tool which seems to allow the water to exit (the door seal gets squashed...
Replies: 64
Views: 82393

Last post by 407
07 Mar 2024, 23:42
Important Information concerning access to PSA parts data

by xantia_v6 » 19 Mar 2020, 04:19 » in Forum News, Announcements and Issues
1

2

3

4

5

6
First post

As some of you may already have realised, PSA (Citroen, DS Automobiles & Peugeot) have this week (from 16/03/2020) decided to close off free access to parts information.

The public version of PSA's ServiceBox, which is the official source for parts and information has had a freely accessible parts system for registered garages, and individual...

Last post

Please note: This Thread is now Locked.

Please Make All Your Citroen or Peugeot Parts Requests Here

All parts requests from this topic have been moved there.
Replies: 88
Views: 122068

Last post by GiveMeABreak
14 Nov 2021, 07:21
New PSA Heritage Parts for Classic Cars

by GiveMeABreak » 11 Oct 2019, 16:18 » in Citroën

First post

Parts for Classic / Older Citroen, Peugeot Renault Vehicles

This may be of interest to Members with older vehicles where getting parts is a struggle and for those not already aware of the site.

PSA are embarking on a project to provide some supplies of original and re manufactured parts for older vehicles and classics, and have made it a...

Last post

I'm trying them for anything showing up as NFP now.
Sometimes hit lucky.

Replies: 3
Views: 35606

Last post by white exec
24 Jan 2020, 16:49
Revised Easydiagnostics Discount Procedure

by GiveMeABreak » 03 May 2018, 17:22 » in Forum News, Announcements and Issues

Please note that there is a new procedure in place for members wishing to take advantage of a 15% discount off products from Easydiagnostics.

The old discount code that was entered into the checkout is no longer valid, as a result of the code being propagated over the Internet.

After discussions with Jim from ED today, we have agreed a new...

Replies: 0
Views: 37910

Last post by GiveMeABreak
03 May 2018, 17:22

Topics

Statistics

Last post

Stellantis Recommended Engine Oils Updated February 2024

by GiveMeABreak » 17 Feb 2021, 19:05

Article Updated to Reflect Changes to Specifications and Oils from February 2024

How To Use This Guide:

First, lookup the Code for the country your vehicle is being used in from the Country Tables. Next, scroll down until you find the tables for your Country (A, B, C or D). Next, cross reference your vehicle's Engine Code in the tables...

Replies: 0
Views: 6195

Last post by GiveMeABreak
17 Feb 2021, 19:05
Peugeot Owner Handbooks

by GiveMeABreak » 13 Aug 2019, 19:36

First post

If you don't have your Peugeot owner's manual, you can view most of them online or in most cases download a copy as a PDF, or in some cases just the relevant section required.

Not all early models are included.

Just follow the link, select your preferred language from the top right corner
Then select the model
Now select the car image and...

Last post

Thanks very much! For some reason the last index page of my 207 handbook was missing; I now know what it says..!

Replies: 1
Views: 3590

Last post by RussellF97
10 Nov 2019, 22:55
Diagnostic Equipment Advice

by myglaren » 18 Nov 2016, 17:03

Please note the following points when using Lexia, Planet or Clip diagnostic equipment!

A Vehicle Communication Interface (VCI) and associated software such as Diagbox, Lexia, and Peugeot Planet 2000 are professional-level diagnostic tools. Extreme care should be taken when using these devices as incorrect use may adversely affect your vehicle...

Replies: 0
Views: 6371

Last post by myglaren
18 Nov 2016, 17:03
2012 207 1.6HDI 92 smoking issue !!

by Andrew121967 » 22 Feb 2024, 13:14

First post

Hi .. a bit of background first

I've had my 2012 207 1.6 HDI 92 from 2013 when it had done 12k .. its now on 85k and regularly serviced by myself as a mechanical fitter.

For some time it has had a nasty smoking habit .. mostly black with a little blue on start up. It gradually got worse and ended up with DPF at risk of clogging message coming...

Last post

Cat must be OK as it passed the MOT emissions, always used decent branded filters and correct spec oil.

It's going into the garage on Monday to see what can be found but any pointers still appreciated.

Replies: 2
Views: 136

Last post by Andrew121967
13 minutes ago
Peugeot 206 auto. Speedo goes off and lumpy gear change

by oldbill » 03 May 2024, 15:45

First post

2003 (multiplexed) Peugeot 206 automatic.
For a few weeks its been randomly loosing its speedo accompanied by lumpy gear shifts. Got more frequent so ordered and fitted a new output shaft sensor for the AL4 autobox but its made no difference. Any ideas?
oldbill

Last post

From your initial post on the sensor, that's the output speed sensor for the AL4. Not connected to road speed.
You didn't say what engine you had. If it's a TU1 or 3, there is a green and yellow wire attached to the coil pack retaining bolt on the right hand side (as you look at it from the front). This is a shield for the coil pack wires. If...

Replies: 11
Views: 164

Last post by ozvtr
15 minutes ago
colant fan not starteing Peugeot 307sw

by Ryssen » Today, 16:08

First post

When the engine gets hot up to 95 to 98 degrees celcius the cooland fan does not start.
where is this on the engine
Any one have a sceets or a picture of where its located on the engine ?

Last post

Ok I will get it checked with OBD.

Replies: 2
Views: 22

Last post by Ryssen
21 minutes ago
EAT6 GEARBOX GREAT IN MANUAL BAD IN AUTO

by sanderman James » 05 Mar 2023, 18:02

First post

my 1.6 bluehdi 2016 69000 miles, started giving fault code p2448 when in automatic mode getting to 2000rpm loses power and throws a code and uses lots of fuel and seems to hunt a little, so I clear code ok till I get to 2000 rpm and does the same, now when I put in manual mode on gearbox it drives fantastic no fault codes drives as smooth as silk...

Last post

That's correct. 'Sealed for life' is a constructor claim, and not something you would want to blindly accept if you want to look after the box and prolong its life. Change the oil every 40-50k by undertaking several oil changes to get as near a full a change as possible.

Replies: 9
Views: 1206

Last post by GiveMeABreak
37 minutes ago
Rattling noise when accelerating 1.6 HDi

by kubek » Yesterday, 16:21

First post

Hi,
I have problem with my 308 sw 1.6 hdi 120 from 2017, 60k on the clock. While driving, when I press the gas pedal, there is a fast rattling sound, when I release it it disappears immediately, the rattling noise can be heard in all gears, but especially on the highest ones. The noise will only appear while driving, engine runs smoothly, no...

Last post

Check your injector seals....look for soot build up or black oily residue around them.

All clean

Replies: 2
Views: 43

Last post by kubek
Today, 20:11
Peugeot 306 Central locking problem

by Mattg083775 » Today, 00:43

Im having a major problem with my peugeot 306s locking system

This car was lying up for ages and the locking system hasnt been used in years. Today i locked the car and it all worked as it should all 5 doors locked when i tried to unlocked it the central locking didnt do anything and only opened the door i had the key in

Now the 2 back doors and...

Replies: 0
Views: 20

Last post by Mattg083775
Today, 00:43
Timing Belt

by moomoo » Yesterday, 14:27

problem solved...

Replies: 0
Views: 37

Last post by moomoo
Yesterday, 14:27
Peugeot 207 1.4VTI P1337

by bluntzMastah » 02 May 2024, 15:39

First post

Hello everyone.

So we bought this tiny little car for my girlfriend and I did some work on it, but still it has problems. I did some research and found this thread: , I am facing similar problem, but not quite the same.

So after we bought the car, there was an oil leak from chain tensioner. Fixed.
Did an oil change and filters change.
Car was...

Last post

So… anyone?

I am trying to accept that probably I won’t be able to find where the issue hides by myself, but at least if someone has any ideas ? Or at least maybe someone could point me if I need to go to electric or someone who works with engines? As where I live there’s a lot of poor mechanics and electrics and the problem from my understanding...

Replies: 4
Views: 189

Last post by bluntzMastah
Yesterday, 12:54
Weird coolant colour

by Fred Timperly » 08 May 2024, 12:51

First post

This is the colour of my coolant... looks muddy... Thought it was supposed to be a vibrant colour.

I have not noticed unusual car temperature or performance decrease but this has caught my eye.

Last post

How long has it been this colour and have you been topping it up with just water, has somebody put in a sealant , is there any sign of oil in there ? You could take a bit out and put it in the freezer, if anti freeze it should not freeze but if it does then you might have only rusty water in the car. The presence of bubbles might be a sign the...

Replies: 1
Views: 39

Last post by PaulC5
08 May 2024, 13:06
Partner 1,9D WJY electrical problem

by baskervil » 04 May 2024, 08:10

First post

Hello friends,
PP 1,9D WJY VF3**************[VIN obfuscated, can be read by forum staff].
After starting the car drove normally. After a while after adding gas, the needle of the tachometer and coolant temperature dropped and the engine started knocking. After a while, the tachometer needle and the engine temperature started working and it drove normally. Then the problem recurred. When the...

Last post

P0605 - Unknown error
P0215 - Main relay, relay faulty
P0102 - Air mass meter: Signal
Short circuit to the skeleton

Replies: 2
Views: 51

Last post by baskervil
08 May 2024, 11:53
windows

by undie » 08 May 2024, 11:48

Hi
I have a 2010 peugeot boxer LWB and my passenger side window will not go up or down
anymore i have replaced the window motor and still no joy , the motor gets hot and there is power to it
all the time , I have found out that relay R4 on the fuse box operates the drivers side window and mirrow
does it control the passenger window , and could...

Replies: 0
Views: 26

Last post by undie
08 May 2024, 11:48
3008 boot not unlocking/opening

by DustyBAT » 05 May 2024, 21:44

First post

Hi

I have a 2010 3008, the boot has all of a sudden stopped unlocking therefore I cannot open it. The fob and the interior unlock button doesn't open it. Is there any way I can get it back open? Is there a fuse that may have blown preventing the solenoid from working?

Last post

If you look on the tailgate latch here in the little slot there is a little arm you move with a small screwdriver that will manually release the tailgate latch so you can get it open to do some investigation. First port of call would be to check the wiring where it goes from the body to the tailgate, as this part flexes all the time its a common...

Replies: 1
Views: 31

Last post by wheeler
07 May 2024, 18:50
308 t7 - different Rear view mirrors

by bulkier » 06 May 2024, 09:07

First post

Hi,
I have two 308 t7 and both by VIN number have ELECTROCHROMATIC DAY-NIGHT INTERIOR MIRROR but they are quite different!

On VF3**************[VIN obfuscated, can be read by forum staff] there is one sensor in front and one on the back, no buttons:

IMG_7961.jpeg

IMG_7962.jpeg

On VF3**************[VIN obfuscated, can be read by forum staff] there are TWO sensor in front (why?!?) and one in the back and one button:...

Last post

The older ones had a switch to turn the electrochrome function on or off, but later ones have a sensor to detect the light entering the vehicle from the rear and darkens automatically. When reverse gear is selected, it then lightens automatically for the manoeuvre.

Replies: 4
Views: 71

Last post by GiveMeABreak
06 May 2024, 14:38
407 HDi 2.7 high diesel fuel pressure P0088 and P0087

by 407 » 07 Apr 2024, 23:45

First post

Hi

Car was running great on highway and then went into limp mode / cruise control error and MIL light

Diag is showing P0088 fuel pressure is higher that reference value 361 bar / 36100 kpa psi v 282 bar / 28200 kpa reference value at 1216 rpm and P0087 regulation of fuel pressure is lower that reference value 760 bar / 76000 kpa v 941 bar /...

Last post

So checked the diesel pump and both solenoids (no 19 and 20) seem to work okay (eg pulled No 20 out and tested on 12 volts and move in and out , multlimeter shows connectivity with No 19 under the pump connected by a wiring loom which would need to pump removed to get to it).

Replaced the pressure sensor with a new one just in case.

Restarted...

Replies: 5
Views: 130

Last post by 407
05 May 2024, 23:09
407 2.7 HDi support/turbo air cylinder over engine removal

by CJRinLara » 03 May 2024, 12:36

First post

Hi
I am seeking to clean a few things in my engine, namely: the glow plugs, the inlet manifold, and fuel injectors.
To do this, it appears I need to remove a very solid metal bar/cylinder over the engine that I believe is some airflow (after the turbo?) cylinder.
Can someone help answer: can I remove this and then how? I have unscrewed the hose...

Last post

From experience, unless something is not working / you have codes on Diag, I would not touch it.

There are two bolts you need to remove that hold the pipe.

Bolt 1 - 10mm attached to the diesel filter

Bolt 2 - 13mm under the turbo tube

Replies: 3
Views: 55

Last post by 407
05 May 2024, 22:48
Door Mirror Puddle Lights Replacement?

by Fred Timperly » 05 May 2024, 20:47

First post

Is it possible to order this puddle light as a standalone unit? I don't mind if it's aftermarket. See attachments please.

Thank you in advance.

Last post

Highly unlikely as these are LEDs by the looks of it and I can't see this as a separate part at all. Looks like it will be part of a new mirror assembly - like LED headlights now - once they go, it's a new headlamp.

Replies: 1
Views: 44

Last post by GiveMeABreak
05 May 2024, 22:45
Peugeot 308 t7 2008 - what is this (on interior light panel)?

by bulkier » 05 May 2024, 17:27

First post

Hi,
can somebody tell me what this “grill” is for?

It looks like some kind of air sensor…?

IMG_7921.jpeg

Last post

In my 3008 that dot on the light lights up when the headlights are on to provide ambient lighting in the car.

Replies: 3
Views: 47

Last post by RichardW
05 May 2024, 17:54
p119f22 ‘Deterioration of the engine oil’ - 2017 Peugeot Boxer Euro 6 2.0 Blue HDi

by TheEuroWombat » 05 May 2024, 12:49

First post

Hey guys I’m looking for some advice.

I have a 2017 Peugeot Boxer Euro 6 2.0 Blue HDi 130 (96kw / 130cv).

Last year my partner and I converted this to a camper and spent 3 months on the road in Europe. At the end of the trip we started getting trouble with out DPF and kept going into limp mode. We cleaned the DPF when we got home and it’s been...

Last post

VIN number is VF3**************[VIN obfuscated, can be read by forum staff]

Replies: 2
Views: 72

Last post by TheEuroWombat
05 May 2024, 14:01
ECU misfire

by NickCUK » 04 May 2024, 21:32

First post

Anyone know if the Lexia-3 interface can tell which plug is misfiring?

Also are there any settings in the ECU which can be configured differently such as strenght of spark?

Last post

It depends on the engine ECU not LEXIA. If the engine ECU supports individual misfire codes, even an OBDII code reader can extract them.
If you supply the engine ECU part number (printed on the engine ECU) someone like Wheeler might be able to tell you if they support individual misfire codes.
Most of the the engine ECU's used by PSA, that I have...

Replies: 1
Views: 34

Last post by ozvtr
04 May 2024, 23:44
urea light in dashboard

by SYED NAQVI » 04 May 2024, 20:02

First post

hi,
I had urea light came up in my car and I have refilled with AD-Blu additive but the light is still on
Plz advise what to do?

17148493089091982504161075341036.jpg

Last post

You'll need to get scanned, suspect there is a fault.

Replies: 1
Views: 34

Last post by RichardW
04 May 2024, 21:19
RCZ speaker removal

by randomandy » 04 May 2024, 18:15

Is there a guide, if any kind, available that shows how to remove the speakers in the RCZ that are fitted in the side panels by the rear seats?

-Andy.

Replies: 0
Views: 19

Last post by randomandy
04 May 2024, 18:15
ABS on rear Drum Brakes?

by spaceface » 28 Apr 2024, 14:19
1

2
First post

Brake pedal has just sunk while braking and there's fluid leaking below the rear drum. I haven't looked properly but I'm assuming the rear wheel brake cylinder has failed. Checking prices for cylinders and shoes I noticed they were available for vehicles either with or without ABS. This has confused me as after looking under the car once when it...

Last post

... and I'd advise you not to take your car back to whoever told you ABS is only on the front!

Reminds me of the garage I used to take cars for MoT.... Until the time they advised me that
A) my '91 Escort had ABS on all four wheels (it did not, it was an early 2-channel system) and
B) they could not adjust the CO at idle on the same car,...
Replies: 15
Views: 269

Last post by ekjdm14
04 May 2024, 16:41
gearbox how long do you roughly think it last?

by harwoodguy » 02 May 2024, 22:59

First post

207 1.4 vti same engine as mini

i noticed my gearbox is making a click noise when around 1.500-2000rpm when slowing down or running at that rpm when driving

its not driveshaft as soon as i press the clutch its quiet or put in neutral

is there a chance the gearbox is going to shxt itself if it starts to get more louder at min you can hear it...

Last post

Hard to know even if you'd included a video/audio recording of the noise really, but practically impossible to say without hearing it, might not even be gearbox but either way would be very helpful to hear it. My money would be on it being more likely a CV joint, or even potentially a running issue causing vibration at certain loads & making...

Replies: 1
Views: 58

Last post by ekjdm14
04 May 2024, 16:04
Peugeot 3008 2011 2.0

by Michal chmiel » 04 May 2024, 08:06

First post

Pls help 🙏 I looked everywhere my peugeot 3008
Got 3 fault cods 040A,04D3,0EB3
I know that first one is oil level,second I believe additive fluid but 3rd one no idea
I watched on YouTube one guy and he ben saying that pump for additive tank got fuse but I don't have idea where I should search for it coz I don't know if pump works or not I got...

Last post

Those codes don't make sense. What did you read them with? What errors are you seeing? You probably need to get a better scanner on it, and look at the relevant live data.

Replies: 1
Views: 34

Last post by RichardW
04 May 2024, 11:17
Peugeot Boxer 2.2 No comms with BSI

by Rods74 » 04 May 2024, 08:54

Good morning all,
I have a 2010 Peugeot Boxer which I purchased as a non runner. I originally thought it was a timing issue as there was no sync between the cam and crank. Having changed the chain (although the timing was perfect anyway) it’s still the same. It now appears there is no comms to the BSI, however we did get it communicating for a for...

Replies: 0
Views: 20

Last post by Rods74
04 May 2024, 08:54
206cc roof issue & fix.

by Huskyxantia » 26 Feb 2023, 15:02
1

2
First post

206cc Roof acting like a stroppy teen.

My 206cc was parked up just before the mot expired & sorned for the winter. I did run it up a few times to keep the engine lubricated but didnt lower the roof enough times due to some rubbish weather & life getting in the way. Last week on a dry but chilly afternoon i started the car & thought lets put the...

Last post

good day, please help! We opened the roof by hand, drove a couple of kilometers, and something started to squeak when we closed it back, and it continued to squeak. They did everything as in the video. We don't know what to do and how to fix this problem. The roof does not open by itself, we do not know why. That's why they tried manual, at first...
Replies: 17
Views: 1597

Last post by Nata13
03 May 2024, 23:09
Boxer door check strap

by C o y i » 03 May 2024, 09:03

First post

Hi all
My boxer rear doors keep flapping about in breezy conditions when opened at a 90 degree angle
Was wondering if the rear door check strap hinges are any good for preventing this as mine hasn’t got any fitted but there are mounting points for them to be fitted ?

Many thanks

Steve

Last post

At the request of the author of the topic that this was posted in, I have moved it to a new topic.

Replies: 1
Views: 26

Last post by xantia_v6
03 May 2024, 12:38
Engineering mode 2019 5008

by Sparky72 » 03 May 2024, 08:15

First post

Hi all,

I couldn’t see an answer to my query, so if it does exist, apologies,

I’m looking to access the engineering mode on our 5008, to enable the entertainment system to use a usb hub. There is one code mentioned quite a few times on the web, 7503900. However I’ve had no success with this number. Would anyone have a different code that I could...

Last post

Hi Tony. Before I can answer that I really need to know which system you have.

This is a different matter to what I thought you were referring. The bloke in the video already has USB connectivity on his RCC unit. He just wants to enable the second USB port that is currently redundant.

I have already done this mod on my Aircross and added another...

Replies: 3
Views: 57

Last post by GiveMeABreak
03 May 2024, 11:36
Peugeot lost/missing key question

by HelioMV » 02 May 2024, 13:04

First post

Hi all, apologies if this is a stupid question...

The other day my dad's 307 wouldn't start. Immobilised. Did some electrical investigation in the car (its very damp :)) but to no avail, then had the key on the bench and turned out it just needed some TLC! Soldered on some new passives to the PCB where the issue was, re-initialized the key and...

Last post

So as long as I extract the pin from the BSI and have a tenners worth of a virgin china PCB, I can code it and it won't lock me out, brilliant!! Also, by your logic, this process can be done on newer vehicles too, such as say a 2014 or 2015 car, is that correct?

The process is exactly the same on all PSA cars with coded keys, the only...

Replies: 5
Views: 116

Last post by HelioMV
03 May 2024, 10:14
208 1.2 petrol wont rev over idle

by tmead » 27 Apr 2023, 12:25
1

2

3
First post

I've just acquired a tatty and unloved 208 for my son. It does start, but the idle is really lumpy and the accelerator does absolutely nothing, no response at all.

I'm also a bit suspicious that the fan continues running after switch off. I'm not quite sure why, as the engine is not hot, and the dash temp guage reads still pretty low.

I havent...

Last post

Hello tmead.

I know this post is almost a year old now. But i think I might have the exact same problem, or at least your symptoms are exactly the same...

My Citroen C1 with the 1,2 VTi PureTech starts and idles rough (sounds like its only igniting two cylinders) no throttle response at all, engine light on, can not contact the ECU (or yes if I...
Replies: 37
Views: 2482

Last post by Netwerkers
03 May 2024, 07:10
Boxer 2018 water pump

by JonnyBell » 01 May 2024, 02:34

First post

Hi. Looking for recommendations for an upgrade over stabdard/oem waterpump.

Im after one with a metal impeller (plastic ones known to fail for some). It's hard to find this listed in specs of most I've found online.

Anyone got first hand experience or share any links to one?

Thabks

Last post

Continental is for sure a good quality brand in timing belts and their accessories. Blue print is a known brand. To tell the truth, never used them. In my opinion is better to go on safe zone of Continental but be careful because it maybe confusing by many variants of the kit. In 3 cases i saw with plastic, cast iron and metal impeller. Good luck....

Replies: 3
Views: 101

Last post by LedZep
01 May 2024, 20:37
2013 Peugeot 208 XY E-HDI Engine Fault on Start.

by wobblewoo » 29 Apr 2024, 09:48

First post

Hello all, thanks for your time.

I have just inherited a 2013 Peugeot 208 XY E-HDI and have an engine fault on start. It starts and ticks over fine, theres no rough idle or anything. The car had been sitting for 6 weeks or so but did start up fairly easily. Someone who knows the car said it was being driven with this fault for a while but i need...

Last post

Looks like it needs a new No 2 injector....

Replies: 2
Views: 65

Last post by RichardW
01 May 2024, 16:40
Identify breather pipe - 307 1.6 16v

by NickCUK » 01 May 2024, 13:27

First post

I have an unknown pipe running from a T-piece where the oil breather goes into the inlet manifold. This goes down behind the engine, runs along the bulkhead and through a hole into the inner-wing/suspension turret but can't see where it goes from there.

Anyone know what this is and where it goes to?

Last post

That sounds like it's the petrol vapour recirculation union, not an oil breather if this is a petrol. It carries the petrol fumes to a depollution canister and eventually returns as fuel back to the tank.

Replies: 1
Views: 49

Last post by GiveMeABreak
01 May 2024, 15:56
BPGA replacement on 308SW

by dram773 » 30 Apr 2024, 10:58

First post

Hi all,
My 308SW (2017) has developed the common battery/charging/all systems fault that seems to be due to a failing relay in the BPGA (part 9675350280).
I've watched a video that shows that replacement is simply a straight swap over.
However, two potential suppliers of the (expensive) part tell me that it has to be programmed and I'll need to...

Last post

Many thanks Marc - owe you a beer or three :)

Replies: 4
Views: 78

Last post by dram773
30 Apr 2024, 16:49
Mono climate control

by freddyokel » 26 Apr 2024, 01:35

First post

So I have a 207cc with dual zone climate control which is, quite frankly due to the size of the cabin, ridiculous.
Getting fed up of having to adjust the temperature on both knobs.
Is there any way of putting the thing into a 'mono' mode?

Last post

I thought you’d enjoy a bit of info on the system. Obviously they can’t modify the complete system just for a Cabriolet, and there’s no way that it can ever compensate for an open roof otherwise it would be going on full blast all the time trying to keep a set temperature, that it would likely never get to. So I suppose it’s a compromise with the...

Replies: 7
Views: 129

Last post by GiveMeABreak
30 Apr 2024, 09:15
Indicator making odd sound

by Fred Timperly » 30 Apr 2024, 01:33

First post

Does anyone know why all of sudden my indicator is making this sound instead of the typical relay sound? this happened when I left my car's ignition on for too long because it wasn't doing it before that... I don't know how to revert this change... please help!

Last post

Yep.... it is under the Pointless and @@@@ing Annoying Options menu

:)

Replies: 2
Views: 67

Last post by Stickyfinger
30 Apr 2024, 08:36
Ongoing problems with Peugeot 3008 - please help!

by ritz_uk » 29 Apr 2024, 17:47

Hi all,

After almost a year of trying to resolve some issues with my 3008 with a 1.6l diesel (and a lot of time and money spent), I’m getting to the point where I just don’t know what to do anymore. We keep trying to get the car ready before going on a family holiday, to be told it’s fixed, and then inevitably there will be a problem. If anyone...

Replies: 0
Views: 63

Last post by ritz_uk
29 Apr 2024, 17:47
Mysterious gearbox bolt.

by Roberts R » 29 Apr 2024, 17:08

First post

I was changing the gearbox oil and thought that the bolt with the red circle is the filling plug but after a few turs it felt wrong. Then I screwed it back. And filled the oil through breathing hole. My question is what this bolt is for and if a few turns out wouldn't make anything serious loose inside the gearbox.

The car ir Peugeot 5008 2018....

Last post

Link for the picture

Replies: 1
Views: 53

Last post by Roberts R
29 Apr 2024, 17:09
1998 106 1.1 Zest 3 Idling Issues

by Robc76 » 12 Mar 2024, 17:10

First post

Good afternoon,
I have a 1998 106 1.1 Zest 3 which, I believe, has the TU1M(HDZ) engine with the Bosch fuel injection. A couple of months ago two issues manifested:

1) The engine misfired when accelerating
2) The idle speed would drop to 500rpm or the engine would stall completely.

Issue #1 was fixed with new spark plugs and HT leads.

Issue #2...

Last post

Thank you. That's my thought too. I do wonder if thickness matters though. Any thoughts on that? Maybe that only matters for carburettors.

Regards

RobC

No, I don't think it will Rob. I've used a cornflake packet for gasket material in the past with no issues...

Replies: 13
Views: 283

Last post by CitroJim
29 Apr 2024, 13:21
Peugeot 3008 2011 Injectors programming ICarsoft

by Clark » 15 Oct 2023, 12:24

First post

Hello.
Could someone advise me please on the programming injectors for the Peugeot 3008 2011 with ICarsoft CR PRO. The issue is that after I have renewed a new injector, I faced an issue with the Diagnostic tool: Application failed .
In fact, in the Injector menu I have two options:
1) Classification of injector.
2) Replacement of injector.

If I...

Last post

The first option is to input the code no of the injector. This must be the code from the new injector. Injector 1 is gearbox end. The second option is to force an initialise where the car learns the new injector & adjusts fueling. On some models this happens instantly (1.6 hdi) and on others it happens the next time you drive the car & meet the...

Replies: 6
Views: 11852

Last post by Clark
29 Apr 2024, 09:58
Boxer oil pump - OEM supplier

by DaveS » 28 Apr 2024, 12:54

First post

HI all,

Im going to be refreshing the chains/oil pump in my 2.2 2015 Boxer. Stealership price is coming out north of £320 for the pump alone (thanks once again Marc!), Autodoc have Pierburg unit for £65.

Im not sure if they are the OEM supplier for the oil pumps for these engines, but i know they are an OEM manufacturer for many other...

Last post

Unfortunately I can't advise on who makes these as they don't supply that info - but as long as you ensure the after-market part has a corresponding cross-reference to the OEM part number, I can't see an issue. Pierburg are OEM manufacturers for a lot of the electro valves used by many constructors, including PSA vehicles.

Replies: 1
Views: 47

Last post by GiveMeABreak
28 Apr 2024, 23:26
Cleaning MAP sensor

by NickCUK » 27 Apr 2024, 22:30

First post

What can I safely clean a MAP sensor with on my Peugeot 307 1.6 petrol? Can I just soak it in alcohol overnight and the let it dry before refitting it. Would like to clean the air-flow sensor as well but not sure that is accessible.

Last post

The MAP sensor on or C5 was not responding to pressure changes as the accelerator was pressed so I took it off and found it was bunged up with oil. I sprayed it with carb cleaner, it was then responsive but then gave error codes suggesting a MAF problem so in the end I had to get a new one.

Replies: 1
Views: 46

Last post by PaulC5
27 Apr 2024, 22:39
P02ec and u1218 fault codes 3008 1.6hdi

by Maclennan1980 » 27 Apr 2024, 16:43

Hi had these fault codes appear on the car the p02ec has been removed but the u1218 still remains the car is a 3008 1.6 blue hdi 2015 automatic.
Will the p02ec codes still throw up the u1218 even though its been cleard thanks for any help.

Replies: 0
Views: 45

Last post by Maclennan1980
27 Apr 2024, 16:43
Strange creaking sound

by Fred Timperly » 24 Apr 2024, 16:11

First post

Car: 2014 — 1.6 e-HDi Allure Diesel Manual Euro 5 (s/s) (115 ps)

Can you please help me find the source of this creaking sound? I will give as much information as I can.

The creaking occurs when moving slowly forwards or backwards , or if slowly steering right or left .

Steering (neutral & engine off, electronic handbrake disengaged and...

Last post

Very difficult to tell, from stationary could be bottom ball joint, can't hear much on the 2nd vid, but you say it creaks when rolling? Which means probably not ball joint. Lower arm bush broken away perhaps? You could ask an MOT place if they can check the front end.

That is like looking at an image of a mouth and being told I have tooth...

Replies: 4
Views: 110

Last post by Fred Timperly
27 Apr 2024, 10:22
508 RXH starting problem

by poginaldo » 25 Apr 2024, 16:42

First post

Hello,

I have a Peugeot 508 RXH from 2015. It's a 2.0 HDI, 133kW. After I changed the cylinder head gasket and timing belt set, I have a problem with starting the engine. This only happens with the first start of the day. It cranks for a long time, and eventually starts, but sometimes I have to repeat the starting process 2-3 times. Then, a huge...

Last post

I can only suggest timing is out or the crank sensor.

Replies: 1
Views: 57

Last post by GiveMeABreak
25 Apr 2024, 17:58
2017 Peugeot 2008 1.2 TPMS/External temp issues

by Roblubi » 25 Sep 2023, 17:21
1

2
First post

Hello!
Im start losing faith in myself after trying to fight TPMS problem in my 2008gtline 1.2 at
I read simmilar topics on forum and none of them suits my problem.
However i used knowledge and help from other users to try solve problems. But saddly without results.

So... car comes with error after turning key TPMS monitoring system fault. As i...

Last post

If I send you my VIN, can you tell me if it is indirect or ESP that is affected by the wrong Temperature Readings? It reads -42 degrees and the heating comes on full blast. The dealer says as it is an intermittent fault, there is nothing he can do.
Replies: 18
Views: 1898

Last post by Benny2
25 Apr 2024, 12:55
OBD-II Code Reader and Software

by AndrewH » 25 Apr 2024, 10:58

Just following up on a topic brought up in my previous post on another subject.

I have a cheap (£20) OBD-II code reader - Streetwize SWOBD3. There are various free apps that can be used with it -

Car Scanner
Auto Doctor
Four Stroke
InCarDoc

Torque (this one costs money)

Does anyone please have experience and could say which would be best...

Replies: 0
Views: 42

Last post by AndrewH
25 Apr 2024, 10:58

7923 topics

Page 1 of 159
- Jump to page:
1
2
3
4
5
…
159
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum