So today I took in the C5 for it's Swedish equivalent of an MOT. Wanted to get it done before the move this month as will be using it to tow (so wanted to make sure it was all in good nick for towing).
She failed on two points, point 1 is an easy fix (one of the front sidelights is out, can't remember if I fixed it last time).
The other is (Google translated):
He also said the unevenness could be caused by the calliper, which makes me think of Steve's post on the rear callipers. Luckily, I have until the 3rd of September to sort it.Foot brake brake force distribution, rear, braking uneven
Foot brake brake disc, rear right, rust-small contact surface
So it seems like I'm going to need new pads and discs for the back. Would it be worth replacing the callipers on the side noted above?
I'm guessing I'm going to need to bleed the brakes too if I'm replacing everything? Do I need a windback tool too for the rear ones? And I probably should get DocBackup working again
I don't have my garage here any more either, but my plan is to get all the stuff ordered, and hopefully get this sorted when my dad is here to help with the move (and fix it at the house).
Any advice would be appreciated