Hi Guys
Sometime ago my airbag light came on when all through the contact cleaning
tricks and tips fix it for a while then it can back fixed it again then it came back intermittent then became a permanent fault
Now I have a none working horn arggh!!!
Taken the airbag of taken steering wheel off clean the Com 2000 rotary connector no joy. I know a new Com 2000 is a lot of pennies for a common weakness of the component.So any good suggestion ?
Also I was thinking I might put the horn on a press button switch on the fixed part of the steering wheel cowling. Can anyone give me an idea how and where to pick up a live feed from?
Any ideas will be appreciated
By the way its a 1.9D 2003 berlingo in Spain
spares are very expensive here as are also the breakers
Cheers
berlingo horn and airbag fault! Com2000
Moderator: RichardW
-
- Posts: 279
- Joined: 24 Jul 2007, 13:08
Re: berlingo horn and airbag fault! Com2000
Hopefully someone here will be able to help as there are a lot of technically able and helpful individuals on here, but have you also tried the new Berlingo forum?ifred wrote:Hi Guys
Sometime ago my airbag light came on when all through the contact cleaning
tricks and tips fix it for a while then it can back fixed it again then it came back intermittent then became a permanent fault
Now I have a none working horn arggh!!!
Taken the airbag of taken steering wheel off clean the Com 2000 rotary connector no joy. I know a new Com 2000 is a lot of pennies for a common weakness of the component.So any good suggestion ?
Also I was thinking I might put the horn on a press button switch on the fixed part of the steering wheel cowling. Can anyone give me an idea how and where to pick up a live feed from?
Any ideas will be appreciated
By the way its a 1.9D 2003 berlingo in Spain
spares are very expensive here as are also the breakers
Cheers
http://www.berlingoforum.co.uk
04 C5 2.0 Auto HDi VTR
-
- Posts: 6
- Joined: 18 May 2010, 19:04
-
- (Donor 2016)
- Posts: 1441
- Joined: 18 Oct 2004, 05:03
- x 102
There is a "how to" article on there about the com 2000.
Dave
2011 Peugeot 3008 1.6hdi Exclusive EGS.
'04 C5 auto estate 2.2 hdi. Gone.
Bx 1.6 TGS Auto 50k A rare beast by all accounts. A bit tired but getting better by the day. Gone.
'96 XM 2.5TD VSX.......Sadly sold. What an idiot! I should have held on to that.
2011 Peugeot 3008 1.6hdi Exclusive EGS.
'04 C5 auto estate 2.2 hdi. Gone.
Bx 1.6 TGS Auto 50k A rare beast by all accounts. A bit tired but getting better by the day. Gone.
'96 XM 2.5TD VSX.......Sadly sold. What an idiot! I should have held on to that.
-
- Posts: 6
- Joined: 18 May 2010, 19:04
Yes there is a how to replace the comm 2000 unit from the aussiefrog original. But I need a little more in depth. this stops just where I need the help.
was hoping someone had dismantled the circuit board connection to the ribbon in the rotary connector. This is where I think the fault lies?
If I could take a feed of here for example it might work without an external push switch.
The original design here is really very poor
Regards
Fred
was hoping someone had dismantled the circuit board connection to the ribbon in the rotary connector. This is where I think the fault lies?
If I could take a feed of here for example it might work without an external push switch.
The original design here is really very poor
Regards
Fred
-
- Posts: 6
- Joined: 18 May 2010, 19:04