RD45 install - can't update VIN / no communication
Moderator: GiveMeABreak
-
- (Donor 2020)
- Posts: 1216
- Joined: 01 Jul 2017, 21:48
- x 120
Re: RD45 install - can't update VIN / no communication
Both the MFD and the RD45 have options for interfacing with the parking sensor ECU for the purposes of displaying the diagram and sounding the reversing beeps. If the car doesn't have the reversing sensors ECU then it must be turned off in the MFD and Radio ECU too as they will be expecting data that never arrives.
-
- Posts: 1366
- Joined: 30 Oct 2012, 22:37
- x 66
Re: RD45 install - can't update VIN / no communication
Thanks Marc.
The MFD has been setup and coded correctly, is fully working and happy with the car.
I had more of a play with it today and was pleased to notice that the MFD was down to three pictorial options in the menu, where before there were four but one was dim and crossed out (I am presuming that was the parking assistance that I have now taken out of the settings).
Setting up the RD45 is the problem.
Hopefully I have a kind person on here that's agreed to try and code it for me using their X7, next time I have access to the car
Had more of a play with it today when I gave the car back (until I get it back for finishing some things).
It recognised when her iphone was plugged in and the 3.5mm jack symbol changed to an iphone symbol. Played tunes from the phone just fine, but strangely sometimes it displayed the wrong track name/artist (not the one that it was actually playing!)
Incidentally, I couldn't find an option to set up the bluetooth? (albeit I didn't have long to play with it)
The MFD has been setup and coded correctly, is fully working and happy with the car.
I had more of a play with it today and was pleased to notice that the MFD was down to three pictorial options in the menu, where before there were four but one was dim and crossed out (I am presuming that was the parking assistance that I have now taken out of the settings).
Setting up the RD45 is the problem.
Hopefully I have a kind person on here that's agreed to try and code it for me using their X7, next time I have access to the car
Had more of a play with it today when I gave the car back (until I get it back for finishing some things).
It recognised when her iphone was plugged in and the 3.5mm jack symbol changed to an iphone symbol. Played tunes from the phone just fine, but strangely sometimes it displayed the wrong track name/artist (not the one that it was actually playing!)
Incidentally, I couldn't find an option to set up the bluetooth? (albeit I didn't have long to play with it)
--
Iain
1x '85 CX GTi Turbo s1 (metallic blue)
2x '85 CX GTi Turbo s2 t1 (metallic silver & grey)
'88 CX GTi Turbo s2 T2 (metallic light blue)
CX DTR T2 Safari (silver)
2x '96 Xantia Activa (Black & metallic green)
'01 C5 2.0 HDi LX Estate (Blue)
Iain
1x '85 CX GTi Turbo s1 (metallic blue)
2x '85 CX GTi Turbo s2 t1 (metallic silver & grey)
'88 CX GTi Turbo s2 T2 (metallic light blue)
CX DTR T2 Safari (silver)
2x '96 Xantia Activa (Black & metallic green)
'01 C5 2.0 HDi LX Estate (Blue)
-
- Posts: 1366
- Joined: 30 Oct 2012, 22:37
- x 66
Re: RD45 install - can't update VIN / no communication
Ah hang on...
Maybe I am under a misconception... I was thinking that it would have bluetooth built in (for streaming) as standard and all you needed to add for bluetooth hands free calling, was a microphone.
Is that not correct?
Does it instead not have bluetooth for anything, unless it has an adapter?
Maybe I am under a misconception... I was thinking that it would have bluetooth built in (for streaming) as standard and all you needed to add for bluetooth hands free calling, was a microphone.
Is that not correct?
Does it instead not have bluetooth for anything, unless it has an adapter?
--
Iain
1x '85 CX GTi Turbo s1 (metallic blue)
2x '85 CX GTi Turbo s2 t1 (metallic silver & grey)
'88 CX GTi Turbo s2 T2 (metallic light blue)
CX DTR T2 Safari (silver)
2x '96 Xantia Activa (Black & metallic green)
'01 C5 2.0 HDi LX Estate (Blue)
Iain
1x '85 CX GTi Turbo s1 (metallic blue)
2x '85 CX GTi Turbo s2 t1 (metallic silver & grey)
'88 CX GTi Turbo s2 T2 (metallic light blue)
CX DTR T2 Safari (silver)
2x '96 Xantia Activa (Black & metallic green)
'01 C5 2.0 HDi LX Estate (Blue)
-
- (Donor 2020)
- Posts: 1216
- Joined: 01 Jul 2017, 21:48
- x 120
Re: RD45 install - can't update VIN / no communication
All of the Bluetooth hardware is inside of an RD45. Have you enabled the 'Nomade' option on your MFD as that is needed to show the Bluetooth menu.
-
- Posts: 1366
- Joined: 30 Oct 2012, 22:37
- x 66
Re: RD45 install - can't update VIN / no communication
Nope, Not some that - will add that to the list for next time
Thank you!
Thank you!
--
Iain
1x '85 CX GTi Turbo s1 (metallic blue)
2x '85 CX GTi Turbo s2 t1 (metallic silver & grey)
'88 CX GTi Turbo s2 T2 (metallic light blue)
CX DTR T2 Safari (silver)
2x '96 Xantia Activa (Black & metallic green)
'01 C5 2.0 HDi LX Estate (Blue)
Iain
1x '85 CX GTi Turbo s1 (metallic blue)
2x '85 CX GTi Turbo s2 t1 (metallic silver & grey)
'88 CX GTi Turbo s2 T2 (metallic light blue)
CX DTR T2 Safari (silver)
2x '96 Xantia Activa (Black & metallic green)
'01 C5 2.0 HDi LX Estate (Blue)
-
- Posts: 71
- Joined: 01 Nov 2018, 11:18
- x 1
Re: RD45 install - can't update VIN / no communication
Is it possible to trick diagbox by saying the vehicle is a newer model so it doesn't open Lexia and then hopefully just talk to the radio on Diagbox to change the VIN?
-
- Forum Admin Team
- Posts: 37465
- Joined: 15 Sep 2015, 19:38
- x 5748
Re: RD45 install - can't update VIN / no communication
Not really - it's designed that way to be able to talk to the older equipment / BSI in older cars. As soon as you connect it up and it has identified the relevant vehicle from the VIN it will launch Lexia if appropriate.
Please Don't PM Me For Technical Help
Marc
Marc
-
- Posts: 71
- Joined: 01 Nov 2018, 11:18
- x 1
Re: RD45 install - can't update VIN / no communication
Hi Marc. This morning I tried it again. I lauched diagbox and told it I had a DS3. It asked for the VIN. After putting it the VIN from the C3 it then gave me a choice of opening Diagbox or Lexia. I chose Diagbox. It went through the communication screen and could not talk to most of the ecus but could talk to the radio. I selected the radio and was able to configure it. I changed the VIN and the beeping stopped. I exited out of Diagbox and unplugged the laptop from the car. I switched the ignition back on and the car and radio are working perfectly.
-
- Donor 2023
- Posts: 6949
- Joined: 07 May 2009, 16:24
- x 1383
Re: RD45 install - can't update VIN / no communication
A good result is a good result regardless of the barmy way you got it. Well done.
As I get older I think a lot about the hereafter - I go into a room and then wonder what I'm here after.
Inside every old person is a young person wondering what the hell happened.
"Trying is the first step towards failure" ~ Homer J Simpson
Inside every old person is a young person wondering what the hell happened.
"Trying is the first step towards failure" ~ Homer J Simpson
-
- Forum Admin Team
- Posts: 37465
- Joined: 15 Sep 2015, 19:38
- x 5748
Re: RD45 install - can't update VIN / no communication
Well done on that part then. Useful to know a bit of skulduggery has worked.
Please Don't PM Me For Technical Help
Marc
Marc