P1AA0 error code
Moderator: RichardW
-
- Forum Admin Team
- Posts: 37576
- Joined: 15 Sep 2015, 19:38
- x 5776
Re: P1AA0 error code
So as you know, (7) is not available, so you will either have to find a second hand one or get somebody to repair the connection if it's only that part that is bad.
Please Don't PM Me For Technical Help
Marc
Marc
-
- Forum Admin Team
- Posts: 25527
- Joined: 02 Mar 2008, 13:30
- x 4930
Re: P1AA0 error code
Perhaps an auto-electrician could supply a suitable part. My car isn't here now but when I replaced the battery last week I'm sure that there was a similar dual cable on the negative post.
-
- Donor 2023
- Posts: 6959
- Joined: 07 May 2009, 16:24
- x 1387
Re: P1AA0 error code
Surely that could be replaced by two (easier to obtain) cables?
As I get older I think a lot about the hereafter - I go into a room and then wonder what I'm here after.
Inside every old person is a young person wondering what the hell happened.
"Trying is the first step towards failure" ~ Homer J Simpson
Inside every old person is a young person wondering what the hell happened.
"Trying is the first step towards failure" ~ Homer J Simpson
-
- Posts: 18
- Joined: 25 Oct 2023, 21:14
Re: P1AA0 error code
Yes and I sad because the second hand cable is green in the connecting part as well. This picture was from ebay.GiveMeABreak wrote: ↑25 Feb 2024, 16:22 So as you know, (7) is not available, so you will either have to find a second hand one or get somebody to repair the connection if it's only that part that is bad.
Or I cut the bad part and I put back the cable lug maybe my electrical friend help me
I hope this will be the problem.
-
- Posts: 18
- Joined: 25 Oct 2023, 21:14
Re: P1AA0 error code
You mean I will buy this cable and somebody will transform it. Will it be working?
-
- Posts: 18
- Joined: 25 Oct 2023, 21:14
-
- Forum Admin Team
- Posts: 25527
- Joined: 02 Mar 2008, 13:30
- x 4930
Re: P1AA0 error code
-
- Forum Admin Team
- Posts: 37576
- Joined: 15 Sep 2015, 19:38
- x 5776
Re: P1AA0 error code
At the end of the day it's one of the negative earth cables, so as long as it is thick enough and suitable for the job, I can't see an issue.
Please Don't PM Me For Technical Help
Marc
Marc
-
- Posts: 18
- Joined: 25 Oct 2023, 21:14
Re: P1AA0 error code
Hi again.
The error has still been. I replace the negativ cable, capacitor and the controller was replaced.
maybe it would be the problem?
I dont know where is the problem.
The error has still been. I replace the negativ cable, capacitor and the controller was replaced.
maybe it would be the problem?
I dont know where is the problem.
-
- Posts: 18
- Joined: 25 Oct 2023, 21:14
Re: P1AA0 error code
Today I replaced the 5. part and the error has still been here. I had to code the new part and it has been done. But currently I got P1AA0 error code.
Where is the problem?
Where is the problem?
-
- Forum Admin Team
- Posts: 37576
- Joined: 15 Sep 2015, 19:38
- x 5776
Re: P1AA0 error code
When you replaced these parts, did you use new or used?
If used, then you may be putting faulty parts back on.
Failing that, the other possible faults point to the electrical harness.
If used, then you may be putting faulty parts back on.
Failing that, the other possible faults point to the electrical harness.
Please Don't PM Me For Technical Help
Marc
Marc
-
- Posts: 18
- Joined: 25 Oct 2023, 21:14
Re: P1AA0 error code
Capacitor and stop-start controller was used but the accumulator controller (5. part) was new.
-
- Forum Admin Team
- Posts: 37576
- Joined: 15 Sep 2015, 19:38
- x 5776
Re: P1AA0 error code
That's the issue with used parts - not knowing the condition of them to be honest.
Please Don't PM Me For Technical Help
Marc
Marc