My wife has had a small coming together with a bollard and her RCZ as shown in the picture below:
Is there a simple way to get behind that panel with a pusher either by removing the speaker or door latch or is it full interior strip to get to it that way?
Will it be simpler to use a dent puller and do it from outside?
-Andy.
Push or pull
Moderator: RichardW
-
- Forum Admin Team
- Posts: 37555
- Joined: 15 Sep 2015, 19:38
- x 5769
Re: Push or pull
I doubt a dent puller will work on that, given the rigid crease in this area; even if you were to get at it from the inside, I suspect it may take a special tool to knock it out somewhat, but even then it's likely to need some professional attention. Have you tried to get a quote from an accident repairer for a private job?
Please Don't PM Me For Technical Help
Marc
Marc
-
- (Donor 2020)
- Posts: 7243
- Joined: 08 Jun 2011, 18:04
- x 2530
Re: Push or pull
Looks like a job for a company like this one, I'm not recommending as there are quite a few in the same game some exceptionally clever.
https://www.chipsaway.co.uk/services/mi ... d621780e82
https://www.chipsaway.co.uk/services/mi ... d621780e82
Man is, by nature, a lazy beast, he does not need twice encouraging to do nothing.
-
- Donor 2024
- Posts: 1007
- Joined: 23 May 2015, 23:35
- x 218
Re: Push or pull
I had someone open his door onto mine, he tried to keep it away from the insurance company so paid for a travelling no paint dent fixer who almost got all of it out, I was impressed, however still ended up in body shop.
Stu
"Some cause happiness wherever they go, others whenever they go"Oscar Wilde (1854-1900)
Major interventions
C5 Steering rack @ 58,000 mi
4 discs & Pads @ 63,585 mi
2 (AM6) oil exchanges @ 58,876 & 72,378 mi
"Some cause happiness wherever they go, others whenever they go"Oscar Wilde (1854-1900)
Major interventions
C5 Steering rack @ 58,000 mi
4 discs & Pads @ 63,585 mi
2 (AM6) oil exchanges @ 58,876 & 72,378 mi