Hi
I am new in this forum, I came from Norway.
My computer runs Win XP 32bit, Digibox 701 installed.
When I run Lexia on my Berling 1.6 HDI 2007 it communcate with the injection system, but not with BSI.
Do any have a proposal for sulution? BSI reset?
Tor
BSI no contact to Lexia
Moderator: RichardW
-
- Forum Admin Team
- Posts: 37459
- Joined: 15 Sep 2015, 19:38
- x 5745
Re: BSI no contact to Lexia
Hi Tor
Try a later Diagbox software version - 7.02 or 7.58, however, if you have an older revision 'B' VCI, it may not support the later vehicle electronic architecture of later BSIs.
Try a later Diagbox software version - 7.02 or 7.58, however, if you have an older revision 'B' VCI, it may not support the later vehicle electronic architecture of later BSIs.
Please Don't PM Me For Technical Help
Marc
Marc
-
- Posts: 3
- Joined: 10 Mar 2019, 19:20
Re: BSI no contact to Lexia
Right you are I have a "B" VCI, with V428, where to bay a god one? I read in several posts that https://www.easydiagnostics.co.uk/shop are working nice, but thay ara out of stock
-
- Forum Admin Team
- Posts: 37459
- Joined: 15 Sep 2015, 19:38
- x 5745
Re: BSI no contact to Lexia
They sell a lot of units, so are always running out - but they do get new supplies in regularly. They provide good support here in the UK and there is a 15% discount for members if you are interested. We are not affiliated with them, but they do provide good quality units:
viewtopic.php?f=51&t=60112
viewtopic.php?f=51&t=60112
Please Don't PM Me For Technical Help
Marc
Marc
-
- Forum Admin Team
- Posts: 9097
- Joined: 09 Nov 2005, 22:03
- x 836
Re: BSI no contact to Lexia
I bought one of these, it is revision C and I have had no problems with it. Support is unknown as I did not need any.
https://fr.aliexpress.com/item/2016-New ... 61755.html
https://fr.aliexpress.com/item/2016-New ... 61755.html
-
- Posts: 3
- Joined: 10 Mar 2019, 19:20