GS/GSA Forum

Moderator: RichardW

159 topics

Announcements

Statistics

Last post

Forum server settings changed

by xantia_v6 » 07 May 2024, 19:01 » in Forum News, Announcements and Issues

First post

Due to excessive server loading caused by some badly behaved 'bots' (automated content collectors), I have changed the anti-ddos settings on the site to be much more aggressive.

This has had the desired effect of reducing the server loading from 100% to about 10% (the other 90% was coming from just 8 IP addresses located in China).

There may...

Last post

I have been keeping an eye on the server performance, and the every 5 minutes same addresses would flood the forum with requests for a few seconds before getting blocked again.

In the last hour they seem to have got bored and gone away.

Replies: 5
Views: 218

Last post by xantia_v6
08 May 2024, 10:30
PSA Electrical Diagrams - Wiring & Symbols Codes Index

by GiveMeABreak » 09 Dec 2023, 17:48 » in Diagnostics

PSA Electrical Diagrams - Wiring & Symbols Codes Index

The following will cover most basic equipment, but will exclude later systems & Tech.

PSA Electrical Diagrams Introduction - Function and Constitution of Codes
PSA Electrical Diagrams - Coding of Functions
PSA Electrical Diagrams - Component Coding
PSA Electrical Diagrams -...

Replies: 0
Views: 37157

Last post by GiveMeABreak
09 Dec 2023, 17:48
Citroen, DS Automobiles and Peugeot Official Part Number Requests

by GiveMeABreak » 15 May 2021, 13:55 » in Citroën
1

…

134

135

136

137

138
First post

Please make all your Citroen , DS Automobiles or Peugeot Parts Requests on this thread

This thread is only for donating members who wish to request official part numbers or Parts Diagrams.

Please don't post technical queries or ask 'how to' questions here. Create a thread in one of the main Citroen / Peugeot Forums for these queries....

Last post

I can't get the OEM Drop Rod Links - they won't allow me to add, so there may be an issue, so these are the alternative and cheaper approved part:

dusty Drop Link.png

(1) Anti Roll Bar, part: 9802490980, £347.78
(2) Anti-Roll Bar rod, part: 1679755380, £19.78
(5) Nut, part: 9807710580, £0.76

dusty wish.png

(2) OEM Front Wishbone (Left),...
Replies: 2060
Views: 689781

Last post by GiveMeABreak
Yesterday, 08:47
Airbag, Dashboard, Seat Belt & Airbag ECU Repairs

by GiveMeABreak » 24 Jun 2020, 17:01 » in Useful links
1

2

3

4

5
First post

Just for members to be aware that airbagteam.com based in the UK are offering a 10% discount to FCF members on any of their services.

The FCF does not endorse any company directly, but thought this would be of use to members.

Full details of their services and the discount can be found here:

Airbag, Dashboard, Seat Belt & Airbag ECU Repairs

Last post

Re the 407 door seal issue and airbag warnings, after a few days of rain and testing with the hose, I gave up as water was still pooling on top of the bottom door seal and then running inside the car.

My solution was to put a few holes thru the seal with a leather hole punch tool which seems to allow the water to exit (the door seal gets squashed...
Replies: 64
Views: 87424

Last post by 407
07 Mar 2024, 23:42
Important Information concerning access to PSA parts data

by xantia_v6 » 19 Mar 2020, 04:19 » in Forum News, Announcements and Issues
1

2

3

4

5

6
First post

As some of you may already have realised, PSA (Citroen, DS Automobiles & Peugeot) have this week (from 16/03/2020) decided to close off free access to parts information.

The public version of PSA's ServiceBox, which is the official source for parts and information has had a freely accessible parts system for registered garages, and individual...

Last post

Please note: This Thread is now Locked.

Please Make All Your Citroen or Peugeot Parts Requests Here

All parts requests from this topic have been moved there.
Replies: 88
Views: 122213

Last post by GiveMeABreak
14 Nov 2021, 07:21
New PSA Heritage Parts for Classic Cars

by GiveMeABreak » 11 Oct 2019, 16:18 » in Citroën

First post

Parts for Classic / Older Citroen, Peugeot Renault Vehicles

This may be of interest to Members with older vehicles where getting parts is a struggle and for those not already aware of the site.

PSA are embarking on a project to provide some supplies of original and re manufactured parts for older vehicles and classics, and have made it a...

Last post

I'm trying them for anything showing up as NFP now.
Sometimes hit lucky.

Replies: 3
Views: 35647

Last post by white exec
24 Jan 2020, 16:49
Revised Easydiagnostics Discount Procedure

by GiveMeABreak » 03 May 2018, 17:22 » in Forum News, Announcements and Issues

Please note that there is a new procedure in place for members wishing to take advantage of a 15% discount off products from Easydiagnostics.

The old discount code that was entered into the checkout is no longer valid, as a result of the code being propagated over the Internet.

After discussions with Jim from ED today, we have agreed a new...

Replies: 0
Views: 37945

Last post by GiveMeABreak
03 May 2018, 17:22

Topics

Statistics

Last post

GS pick-up

by Stonehopper » 05 Feb 2017, 21:14

First post

GS pick-up anyone?

Last post

Are they still trying to flog that thing

been about for some time now

Replies: 1
Views: 2355

Last post by Stickyfinger
05 Feb 2017, 21:28
Steering pinion

by 2cy » 18 Dec 2016, 20:48

First post

Hi guys. I'm new with GS stuff so be gentle with me.. but my query is regarding the steering pinion used on the GS models without PAS. My own car is an Ami super of 1974 vintage, which of course uses the GS's 1015 engine with ancillaries, plus the 1220 gearbox and f.brakes (although the bell housing is unique to the super) ...so it uses quite a...

Last post

^ yes, same pitch but much shorter bolts to hold the end plates on.

Thanks for the link, ECAS would most likely have been my second attempt. As it was I got 30mm x 9mm from Suffolk Fasteners, here in Ipswich - 5 for £10 incl postage, so I save a fiver or more over ECAS prices. but useful to know that they were also used for the handbrake...

Replies: 4
Views: 2807

Last post by 2cy
20 Jan 2017, 12:02
wheel alignment question

by sonoramicommando » 16 Jan 2017, 18:25

First post

Hi all,

I got a new set of XZX's (eye watering price for 70's technology tyres, really) so I thought I'd make the most out of them and got wheel alignment done yesterday.
They told me though, because of non-removable spats on rear guards, they can't put the alignment thingamyjiggy on the rear wheels and can't do the alignments. And as no...

Last post

I always do my tracking with a threaded rod slid inside a length of steel electrical conduit. Adjust the length so it just touches the widest part of the tyre about level with the bottom of the wheel, a brick is about the right height, slide it to the back of the wheel and observe the gap or other wise, about 1mm is about right for most wheels...

Replies: 6
Views: 3036

Last post by Peter.N.
18 Jan 2017, 10:37
GS windscreen

by Glennbilly » 10 Jan 2017, 21:28

First post

Does anybody know where I can get a GS windscreen?

Last post

Pilkingtons make them new.

Sometimes there is a bit of a wait, but they have the tooling. Even if they didn't have the tooling, they'd make it (for a price).

Replies: 3
Views: 2744

Last post by macplaxton
12 Jan 2017, 01:14
a new acquisition

by sonoramicommando » 02 Apr 2016, 02:30
1

2

3

4
First post

Rightio, picked up an '82 GSA Pallas, as usual, there are things to sort out - any input would be appreciated.

1. Smells of fuel when sitting in the garage (yesterday was particularly bad, after getting stuck in the traffic for an hour - it had slight dieseling when I shut it off).
I can also smell a bit of fuel inside the cabin. Any ideas?

2....

Last post

I had similar with mine. No indicators or instruments. After some investigation, I found it was the ignition switch. A bit of a pig to change, but one changed all was well.
Thanks - I did look at the ignition switch for a different reason (offset from the key hole) and it looked a bit awkward. I hope I won't have to change it, fingers crossed......
Replies: 49
Views: 9666

Last post by sonoramicommando
31 Dec 2016, 18:17
Spotted blue GSA in Glasgow

by aerodynamica » 10 Dec 2016, 21:39

First post

I spotted a blue GSA on the M74 going towards south Glasgow this morning (Saturday, 10th December) going along.

Looked great going along and so rare and surprising to see :)

Last post

I think all the early Citroens were brilliantly designed, the CX, was my favourite, never had a DS but I suspect that was even better, its a pity all that innovation is no longer with us.

Peter

Replies: 3
Views: 2334

Last post by Peter.N.
26 Dec 2016, 16:53
Fitting GSA rear spoiler

by sonoramicommando » 25 Nov 2016, 06:36

First post

I'm getting around to fit the rear spoiler - I bought it a second hand one from Chevronics but left it in the garage until now.
Now I had a look at the service manual and the spoiler itself, it needs 5 special brackets to be pop riveted first.
Unfortunately the spoiler didn't come with any of the fitting hardware so I'm well screwed - has anyone...

Last post

The spoiler actually has a provision for wiper motor hole but looks very ugly from what I've seen on the internet photos. Mine is a second hand unit from Chevronics and it came with the hole butchered open. I managed to find a rubber plug to fill that (as well as wiper motor hole on the hatch).

Replies: 14
Views: 3326

Last post by sonoramicommando
04 Dec 2016, 18:09
seeking some nice tips on sunroof adjustment (GSA)

by sonoramicommando » 04 Dec 2016, 08:14

So I finally got around putting back the sunroof - as some may recall I got burnt by lazy and irresponsible (coming from me, it says a lot) previous owners, who initially sealed the sunroof with sealant and subsequent owners who didn't get around to do anything about it. The result? Rust, lots and lots of rust...

The seal carrier was a toast, 75%...

Replies: 0
Views: 1767

Last post by sonoramicommando
04 Dec 2016, 08:14
Buying a GSA - any tips?

by harvestmouse » 21 Apr 2014, 10:35

First post

Hello all

There is a GSA for sale and I'm tempted.

The thing is, although I have had a lot of cars, including a number of Citroens (am familiar with flat air-cooled engines, such as that in the GSA) I'm not at all familiar with the rest of the vehicle.

The only hydraulic-suspension Citroen I have even had was a 1985 BX. Horrid car. Wanted to...

Last post

More GS's on Ebay:

Replies: 13
Views: 5706

Last post by Stonehopper
30 Nov 2016, 17:14
Citroen safety film, early seventies

by Stonehopper » 26 Jun 2015, 18:11
1

2
First post

A feast of 2cv; GS; DS; SM.
Lots of GS action:

Last post

Just watched that film again, and spotted another. All in Italian, but the images make up for much. Again a film from the seventies. 15mins long:
Replies: 24
Views: 6421

Last post by Stonehopper
15 Oct 2016, 10:29
GSA factory stereo setup Q

by sonoramicommando » 01 Aug 2016, 01:43

First post

Did they come with one installed either standard or optional fitment?
Does anyone have factory standard setup, if so can you post some photos pls?
Cheer,
Sam

Last post

I think I'll slip in a partition of some sort - I might have a flat fibreglass panel somewhere...
As for the stereo opening on mine, it might have been cut at the dealer when sold new - It looks to be very precisely cut, but I think I can make out a bit of burr at places and it's definitely not molded in that shape from the factory.
I think your...

Replies: 9
Views: 2896

Last post by sonoramicommando
10 Aug 2016, 10:16
hub cap interchangeability

by sonoramicommando » 21 Jul 2016, 08:45

First post

are the plastic hub caps and the chrome ones interchangeable?

Last post

hmm I think series 2 GS pallas one looks the best - it's gonna cost me some pretty pennies though...
thanks

Replies: 4
Views: 2069

Last post by sonoramicommando
22 Jul 2016, 09:45
cutting spare keys

by sonoramicommando » 05 Jul 2016, 21:15
1

2
First post

Hi all,
My car came with only one set of keys - and I'm one of those people who is prone to misplace stuff so I'd like to have a spare set cut and stashed away somewhere.
The door key looks fairly generic but the ignition key seems a bit unique in that it's fairly thick for its overall size - would a corner locksmith have a blank to cut these keys...

Last post

SX6 works like a charm. cheers.

Sent from my iPhone using Tapatalk
Replies: 22
Views: 4874

Last post by sonoramicommando
19 Jul 2016, 02:35
Citroen gsa 1300

by Raul » 24 May 2016, 07:20
1

2
First post

Hi

It finally arrived. First impressions compared to xantia:

1) Steering is heavier
2) Noise in the cabin is much more loud
3) Height correctors work much quicker, almost instantly
4) The car is more stable on uneven road, the xantia is more like a boat.
5) Low speed uneven road is softer but some potholes and riddles are sharp
6) braking feels...

Last post

Hi

So today I wanted to drive to work but after a few km-s I realised that clutch pedal feels different and the clutch is slipping. It happened overnight. How bad is clutch on them to change? Does it mean engine off??

Had a problem like this back in the day and took the engine out twice replacing the clutch assembly. I found the problem to be...
Replies: 17
Views: 4691

Last post by onlyfinewine
11 Jul 2016, 03:53
Listing of GSA X3 engine numbers

by black_label » 23 Jun 2016, 12:13

First post

I've been offered a GSA 1299cc engine and the current owner doesn't know what age/year it is. Is there website or database where I can check up on the year it was made? I have the engine number.

Last post

I would suggest contacting Julian Marsh: or Rob Moss:

Replies: 1
Views: 1625

Last post by Stonehopper
24 Jun 2016, 07:43
GS Break covers

by bighairybloke » 05 Jun 2016, 14:54

First post

Anyone know of any body that makes decent covers?

Ta

Steve

Last post

Depends how much you want to spend...

Not cheap, but it would be the best outdoor solution.

Replies: 3
Views: 1819

Last post by BenC5HDi
05 Jun 2016, 22:27
And so it goes . . .

by Stonehopper » 20 May 2016, 20:06

First post

Having fitted new front exhaust pipes, Y section, and manifold gaskets about a year ago, I one day get that regular chuffing sound from number 1 exhaust. Dismay. I should gave guessed that the bodged repair of a stripped stud by a previous owner replacing said stud with an M8 bolt tapped into the head, was not the correct solution, and would one...

Last post

Hi

My car arrived last week and it is a very good car but the famous y-pice has a little hole. The seller told me that it needs replacement. My plan is to grease it with some exhaust grease and wrap some exchaust tape to cover the hole and keep the car going. I am building the garage to work on my citroens but it takes at least a year to finish...

Replies: 2
Views: 1867

Last post by Raul
23 May 2016, 13:37
how well does C matic work with GS/A flat 4?

by sonoramicommando » 18 May 2016, 02:31

First post

I'm just curious to know how well it is matched to the GS/A engine.
My (limited) impression is that GS/A engines need to be worked hard at high revs to get it going but how do C matic owners find it?
Also, how does it compare to CX C matic, which has a bit more displacement on its side.
Cheers,
Sam

Last post

Really? Just emailed him yesterday for trim clips, got a reply back pronto: info@chevronics.co.uk
Phoning from NZ might be a touch pricey!

Replies: 7
Views: 1970

Last post by Stonehopper
20 May 2016, 06:38
Haynes Manual

by cachaciero » 13 May 2016, 21:54

First post

I have a copy of the Haynes Manual for the GS a bit oily in places, but usable, should anybody want it for the cost of postage say now or at least within a week or it's headed for the skip.

Regards cachaciero

Last post

I would like to buy/take it. Send me a pm please.

Replies: 4
Views: 1807

Last post by Raul
15 May 2016, 17:15
What oil for a 1299cc GSA engine?

by Northern_Mike » 21 Sep 2013, 20:29

First post

Well, the subject says it all really. I believe the original spec was 20/50, but I'm finding it a bit expensive and rare these days.

Last post

Years ago BP Technical confirmed to me on the phone - when I was making an enquiry about Duckhams Hypergrade 20W/50 - that 5-litre containers marked 'Diesel' and 'Gasoline' were actually the same stuff, and that packaging was tailored to reassure purchasers that they were getting something specific. Honest, if nothing else.

I have run PSA diesels...

Replies: 13
Views: 9964

Last post by white exec
14 May 2016, 08:10
front spoiler Q

by sonoramicommando » 26 Apr 2016, 12:07

First post

right - the car is missing the front 1/4 width chin spoilers - where it would have been mounted, the flanges had been torn a bit and the fasteners (or possibly blanks) are missing.
did all GSA come with the front spoilers or was it optional depending on trim level (club, pallas, x3 etc etc)?
and are they worth putting back on?
cheers

Last post

intetesting - I'll have a closer look when the car s back from the garage. that german parts place online has them around 27 euro i think. not bad price, i guess.

Sent from my iPhone using Tapatalk

Replies: 2
Views: 1532

Last post by sonoramicommando
27 Apr 2016, 01:00
Distant Export version

by sonoramicommando » 16 Apr 2016, 05:33

First post

I've been reading GSA bilingual technical description and it goes on about Distant Export version.
Does anyone know how distant these regions are?

Sent from my iPhone using Tapatalk

Last post

not sure it is. most of additional items added/modded appear to be non cosmetic and functional.

Sent from my iPhone using Tapatalk

Replies: 2
Views: 1549

Last post by sonoramicommando
17 Apr 2016, 04:19
GSA insurance

by scratcher » 25 Feb 2012, 08:06

First post

My insurance on the GSA is due in about three months time, but 'money supermarket' have jumped the gun and sent me estimates for renewal , they range from £104.50 to £ 1908.00. The latter sounds a little over the top!! I think I might just ignore that one. Gerry

Last post

Next time she asks give her a Primus and a folding table . . . (May come as no surprise that I have been previously divorced).

Replies: 9
Views: 3573

Last post by Stonehopper
16 Apr 2016, 17:32
Buying new brakes + new tyres - advice ??

by 2cy » 12 Feb 2016, 10:23

First post

I need to buy new brakes & tyres for the Ami Super. Several questions to ask if I may ..

A. 135 or 145 tyres.? rolling resistance is probably just a little less and the steering may be a little lighter with the 135 section. But what's your opinion.?
B. Citroens were designed to run on Michelin tyres. That then would be the obvious first choice...

Last post

Interesting that 2cy has had steering linkage issues - my last MOT tester mentioned (though not an advisory) that there was a slight wheel bearing play in the front right. I checked for play with wheel clear of the ground and could detect no play whatsoever in the top/bottom apsect (12/6 o'clock), but definitely some in the 9/3 o'clock. Wheel spun...

Replies: 12
Views: 2952

Last post by Stonehopper
13 Apr 2016, 16:56
HID conversions & Selective yellow headlights

by Stonehopper » 17 Mar 2016, 22:27

First post

For information if nothing else:

My GS has selective yellow asymmetric bulbs (not halogen), and they are ample for regular driving at night.

Last post

More on the lighting front;
The complexities of LED's, their heat sinks and output:

- and on reflector design:

Hat tip to Phill over on 2cvGB - it was he who did the digging!

Replies: 3
Views: 1898

Last post by Stonehopper
08 Apr 2016, 07:41
GS 1300 Lumpy idle and running any ideas please.

by falling-out-with-my-car » 26 Nov 2015, 11:38
1

2
First post

Hi, My Father who is in his 80's and getting top a point where I need to help him
out quite a bit has a 1300 GS Hatchback and it runs like a bag of bolts, things we know
fuel supply is good and filters are ok plugs are good to the car starts up and runs well its just very lumpy.
perhaps a carb rebuild any ideas please?

secondly we rebuilt her...

Last post

A Weber, OK. Webers are good. Some would say easier to set up than the Solex, but I wonder if there is much difference really.

Odd about 2cv coils. In over thirty five years of owning and running A series, I have never had a coil fail. I do have a few spares which have come my way over time, but the Harley coil seems to be a good choice if...
Replies: 23
Views: 4776

Last post by Stonehopper
18 Mar 2016, 11:27
GS Gearbox Mainshafts?

by emulti » 25 Oct 2015, 16:15

First post

I inherited three brand new gearbox mainshafts for GS/GSA (according to the vendor) with the spares that came with my CX.

Looking at the parts book, they do look like the a GS part, but I have no part numbers on the packing.

I have put some photos here:

If anyone can identify them and would like one for a nominal cost, please let me know!...

Last post

Not from Cx not from GS(A).

Gs has a bevel pinion on the end of the shaft, not a helical one.

Cx has 1st gear tooting like removable wheel, not integrated like in your pictures.

Replies: 1
Views: 1810

Last post by Wesa
27 Feb 2016, 06:42
HELP !! Citroen tools

by 2cy » 20 Feb 2016, 15:05

First post

Next month (middle of March) I plan to drive down to Slovenia to work (start recommissioning) my recently acquired Ami-Super. 42 years old and 30k miles (on the clock) this car is (mechanically) original with the G10 Citroen GS motor and 1220 gearbox / disc brakes. I'll start by replacing the cam-belts and servicing the motor, before progressive...

Last post

=D>

Replies: 8
Views: 2076

Last post by 2cy
21 Feb 2016, 13:08
GS timing belts / tensioners

by macplaxton » 03 Jun 2015, 02:38
1

2
First post

Homework time before the ordering.

if you require new belts and tensioners
i have just purchased a set of belts for i think £36 squid from AJAYS motor factors,
and although Chris Salter supplied the tensioners this time, they are still available from GSF for around£13 quid each, as opposed to ( i have heard ) someone that sells them for i think...

Last post

I've had a laborious time on the interweb this week.. aside from desperately trying not to get frustrated &/or despondent... I have found that Continental , still have GS 1015 cambelts listed as 'active' - ie., they are still available.

I then found these at Mister-Auto.co.uk and so I phoned through to Rob at Chevronics who had put aside a pair...
Replies: 17
Views: 4904

Last post by 2cy
19 Feb 2016, 20:21
Y reg gsa forsale

by savoy » 15 Feb 2016, 20:22

Anyone interested????
y reg 1982 gsa in light blue.
Its been sitting in a dry garage for the last 14 years.
Its a project ......requires work.
Call me on 07831898573 if brave and fancy a real challenge.
07831898573 01282 773466
savoygarage.co.uk
:shock: :shock:

Replies: 0
Views: 1611

Last post by savoy
15 Feb 2016, 20:22
Citroen GS production

by macplaxton » 04 Feb 2016, 14:59

First post

Wandering the web, I came across this:

It's a 1973 documentary called Humain, trop humain by Louis Malle.

Last post

Yeh....I I had the one Imp you produced....thanks for that !

=D> Wasn't on the Imp line I'm afraid - I was underneath Commer Spacevans bolting up and connecting steering, throttle and rear shocks. Spent two weeks banging my head on lumps of metal. Best protection was a wooly hat! #-o

I would have chosen the crane driving job - used to drive...

Replies: 5
Views: 1866

Last post by Stonehopper
06 Feb 2016, 20:57
Gone and got another!!

by Mothman » 04 Feb 2016, 08:29

First post

It looks like ime the owner of another GSA!! This time its an Estate from 1980 with all the proper GSA binnacles etc. Watch this space for developments!!

Andy

Last post

Hi Derek,

its a Singer Vogue i believe, due to be restored by Rob soon. Its actually his own personal motor .
When the GSA is done, at the moment, ime planning to drive it from Hitchin to Cornwall but we will see. I hope it makes it!!

Andy

Replies: 5
Views: 1705

Last post by Mothman
06 Feb 2016, 10:45
My newly aquired GSA

by Mothman » 03 Aug 2014, 11:31
1

2

3

4

5
First post

I have recently bought a 1980 GSA from Chris Salter and she is now with Rob Moss at Chevronics for a total restoration.

A C-matic, i have decided to keep her as such.

Andy

She is a very early GSA with the GS dash and interior.

A

Last post

Probly was then bud, looked in reasonable nick too.

Andy
Replies: 61
Views: 11379

Last post by Mothman
27 Jan 2016, 08:03
Tyres; Tubes in Tubeless

by Stonehopper » 23 Dec 2015, 17:52

First post

I have in the past, and more recently, fitted tubes into tubeless tyres that showed signs of deflating slowly due to rim corrosion failing to seal on the tyre bead. My local tyre depot had no problems fitting tubes into my tubeless tyres on the Dyane (due to the aforementioned reason for leakage) and are quite happy to fit tubes into the GS wheels...

Last post

I've had done it myself (fitting tubes into tubeless rims) on various cars, but the advice I was more recently given is that the valve holes of some alloys are a different shape, and that the inside of the hole needs to be rounded before fitting tubes, otherwise they chafe on the hard edge. Not so much of a problem with steel or extruded alloy...

Replies: 10
Views: 2008

Last post by 2cy
24 Jan 2016, 19:42
GS difficult to start

by Oldsmoker » 20 Oct 2013, 14:10

First post

My GS is a pain to start from cold and needsway too much cranking to get to go which is of course wrong. Plugs and leads are relatively new though i baulked at the points due to the need to take the dizzie off. I'll be doing that this week. However, I suspect compression may also be an issue so I've tested number 4 which is only 80psi (5.25kg/m3)...

Last post

pssst Derek.. this is GS difficult to start (clue's in the title ;) )

It was two years ago . . . I think it should have started by now . . . ! 8-[

Replies: 14
Views: 3259

Last post by Stonehopper
20 Dec 2015, 20:32
Unable to finish free to good home. (CAR NOW GONE)

by falling-out-with-my-car » 24 Aug 2015, 13:14

First post

Here we have a GS 1300 V-reg Estate 1980 free to good home.
The engine runs very well which is a good start but she will need a bit of work
and of course will need to be trailered away. could be driven onto the trailer.
The suspension lifts as it should.
The Car is in Burton Latimer Northamptonshire very close to Junction 10 of the A14....

Last post

Top result

Replies: 4
Views: 1686

Last post by Stickyfinger
26 Nov 2015, 12:26
Eviction!

by Stonehopper » 12 Nov 2015, 16:21
1

2
First post

Mice that is, under the bonnet. Little devils are in there even after a couple of days parked on the drive. Problem is, we are surrounded by fields and hedges, and the spare wheel with a rag in for cushioning the jack and oil bottles make an ideal nest for lodgers! Cute little devils, and cheeky with it, but they're not house/car trained and pee...

Last post

We caught a rat yesterday =D> in a trap I might add. One down, I wonder how many to go. :?

Peter
Replies: 29
Views: 3823

Last post by Peter.N.
17 Nov 2015, 11:23
1983 y reg gsa

by savoy » 15 Nov 2015, 20:54

I have a y reg 1983 citroen gsa in blue requiring someone to love it again.
Its in a garage nice and dry and still all there.Its been there for 14 years and the rear subframe was half removed.
I bought it but can not find the time to collect and refurbish it. :shock: .
Interested ?????
call me on 07831898573 0182773466
savoygarage.........

Replies: 0
Views: 1385

Last post by savoy
15 Nov 2015, 20:54
GS-GSA Windscreen

by emulti » 22 Oct 2015, 10:12

First post

Hello,

As part of a load of spares that came with my recently-bought CX, I acquired a secondhand GS/GSA tinted windscreen.
I had a look at it the other day, and it seems to be in good condition with no chips.

Would any of you GSA owners like it as an insurance against a future broken screen?

I need the space, so stuck it on EBay for a tenner,...

Last post

PM sent.

No little 'mailbox' icon appears, whether I am logged in or not, and no private message was received. However, in 'Private Messages' there is a disclaimer that might explain matters:

We are sorry, but you are not authorised to use this feature. You may have just registered here and may need to participate more to be able to use this...

Replies: 6
Views: 1579

Last post by emulti
25 Oct 2015, 11:50
Now, how did that happen?

by Stonehopper » 30 Aug 2015, 17:52

First post

She gets used three or four times a week, and starts fine on full choke. Takes a while to warm up, but after three or four miles the choke is completely off.

Until about ten days ago. She started to fire up very reluctantly, and almost on two pots. Left to chug-a-lug she'd gradually get going, though touching the throttle would cause a stall....

Last post

Speaking of infestation - took the Weber off the spare engine yesterday (been under a sheet outside for yonks). Spindles were seized, but chokes full of rat bait put there by some squatting mouse for storage. Never got any rent either . . . Damn cheek.

Replies: 2
Views: 1364

Last post by Stonehopper
26 Sep 2015, 08:45
GS 4 speed, exhaust Y-piece

by macplaxton » 15 May 2015, 14:42
1

2
First post

What is ahead of me? Is it fun? Is it easy?

The part I have ordered is currently in transit from Germany (and still in Germany), so I'm just bracing myself for this journey of discovery. :lol:

When I bought the car it had a fresh Y-piece, middle pipe and rear silencer. The bracket on the Y-piece has rusted through/fatigued on one side for the...

Last post

Thanks both. Checked the timing with the Xenon and it was only a couple of degrees out. Certainly runs a lot sweeter especially in the low range. Such a nice car to drive - popping out to the shops just a mile away generally ends up with 15 or 20 miles on the clock.

Popped a new set of pads in the front brakes too. Had a leakage a while back and...
Replies: 24
Views: 3982

Last post by Stonehopper
18 Sep 2015, 19:32
GS door mirrors

by Stonehopper » 18 Aug 2015, 15:15

Are yours sitting comfortably? Then read no further.

I have a French built left hooker, and when I took it on there was no door mirror on the right hand side, and it is that side that has become too familiar with some gateposts in the past. One sage stated that if I took some measurements of the position of the left hand (fitted) mirror using...

Replies: 0
Views: 1415

Last post by Stonehopper
18 Aug 2015, 15:15
The return of the alternator belt muncher.

by macplaxton » 22 May 2015, 22:09

First post

Well it feels that way.

Went out to start the GS at 2.30am and it was no joy at all. So in went the lawnmower can just in case the fuel gauge was telling fibs, but fuel was getting through, so it was more hope than anything else. With a 3am start, I then proceed to flatten the battery. Dig out a pair from the shed. Mess around with the Ducellier...

Last post

Cheers Vince. I've not mixed my wires up and it's definitely on the right one. It's all gone back together, so I'll leave it until next time...

I've no charge warning, just a volt meter, which is part of the problem of not noticing the instant it breaks. I tend to notice the dim dashboard lighting first. :oops:

Yes I could go to the trouble of...

Replies: 10
Views: 2176

Last post by macplaxton
05 Aug 2015, 21:50
Classic car meet Sunday 19 July

by Stonehopper » 18 Jun 2015, 14:34

First post

At Apley Farm Shop, Sutton Maddock:

onclick= window.open(this.href);return false;

Should be a GSA, GS, and a '67 2cv there.

Last post

It was. I was in half a mind to go expecting a low turnout, but pleasantly surprised. Immaculate Rile Elf there, along with a equally immaculate two tone Riley 1.5. A superb VW camper, spoilt by dropped chassis and wide chrome wheels (why do people do that?). Lots of vintage(?) pic-nic sets too.

Replies: 4
Views: 1682

Last post by Stonehopper
26 Jul 2015, 13:52
A Happy note

by Stonehopper » 14 Jun 2015, 10:55

First post

Stuffed the boot full (including some tools), planted the roof box on (also filled), and off - three and a dog - from Shropshire to Badenoch and Strathspey for a family catch-up - and back home.

Lots of rain North of Glasgow on the way North, but the rest of the week fine warm weather. Car never missed a beat. All in a total of 1,065 miles...

Last post

Works for me on desktop view / Android

Excellent wee trip!

Replies: 2
Views: 1427

Last post by macplaxton
14 Jun 2015, 13:59
Ducellier 4411B distributor parts - schoolboy error.

by macplaxton » 09 Jun 2015, 22:04

First post

Okay, okay. I didn't read the parts book properly and order the right bits.

The plan of action was to replace 4 bits of the distributor the other day. I'd order a Valeo D103 cap and rotor set and a D221 contact breaker and condenser set from mister-auto.ie

This is the second time I've ordered from Mister-Auto and they got it right this time. In...

Last post

Thanks Vince, but I've already got one (and had one).

The Draper thing blew the fuse/board and the Equus Innova 5568 timing light I have that does it is in bits - failed LCD backlight and the tube isn't flashing as bright as it was: onclick= window.open(this.href);return false;

Had all that carry on with the formerly fitted SEV. ;)

Replies: 2
Views: 1804

Last post by macplaxton
11 Jun 2015, 23:07
M.O.T. fail on -

by Stonehopper » 30 Apr 2015, 14:19
1

2

3
First post

Unspecified suspension fluid leak

Well, we got it back up in the air and took a look. The unspecified leak is causing a wetting of the subframe, and there was a little puddle (a desert spoonful) of LHM on the deck.
It appears to be coming from the junction tucked up against the lower inner wing above the steering rack end. There's a rubber...

Last post

Good to hear the car has now passed.

With regards to the Testers' manual wording...

...Two front position lamps must be fitted, one on each side and show a steady white light to the front (or yellow if incorporated in a yellow headlamp)

...3. Check that the lamps: (e.) show light of the correct colour. Note: Some front position lamps have a...
Replies: 37
Views: 6935

Last post by macplaxton
28 May 2015, 22:14
Getting the GS out again

by macplaxton » 03 May 2015, 21:14

First post

I haven't started this car in aeons. Turns over okay. Off out to get some fresh petrol. If it starts I'm using it later. Needs must.

Q: Are the heads safe or am I venturing into a whole world of pain if a camshaft belt goes?

Last post

For the record, I've found a file on the computer. Last fuel up before getting out again was 10th Nov 2013. 18 months or so ago :oops: :oops: :oops:

Replies: 10
Views: 2369

Last post by macplaxton
22 May 2015, 21:49
GS wipers, speed or lack thereof

by macplaxton » 06 May 2015, 20:56
1

2
First post

I've got some dead wipers, but haven't delved into it yet. I might need another wiper motor whilst I look into it.

At the moment there is no movement when switched to first or second speed at the switch. I don't think it's the fuse as it has a 4 fuse box and from memory the clock works on the same circuit.

Past hazy memory notes:
Very slow sweep...

Last post

good the spindles are free, the metal bodied type do seem to be better than the nylon type, and i think easier to sort if need be
Replies: 26
Views: 4245

Last post by citronut
18 May 2015, 09:26
Mr Chris Salters new acquasition

by citronut » 14 Feb 2015, 18:06
1

2

3

4
First post

at my workshop for some TLC

i got round to tinkering on her today, got her running well sort of, at least more than she were anyhow,
dont think she has ran since 96 or 98,

aparently she has had several people attempt to get her doing, even bin sitting in a workshop/car repairer's who gave up trying, now said garage is closing down and...

Last post

i recon i twas Rolland Rat or even Rat a two eeeee, obviously didnt have a taste for wiring and HT leads as they seem intact :o :yikes: :missile: :missile: :-D
Replies: 47
Views: 7391

Last post by citronut
10 May 2015, 13:21

159 topics

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum