Oil cooler gasket replacement (torque settings)

This is the Forum for all your Peugeot Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
Chegutupaul
Posts: 2
Joined: 13 Mar 2024, 10:45
Location: Derby.
My Cars: Peugeot Partner Teepee 1.6(BHY) 2018

Oil cooler gasket replacement (torque settings)

Post by Chegutupaul »

I have an oil leak from the oil cooler/filter housing, car has over 200000 on the clock. So I will replace the gaskets on it.

I'm also replacing the Turbo. As I am getting an intermittent error on the Turbo P2566 and it has to come off anyway to get to the cooler. I think it may be coming to the end of its life.

1.6 partner teepee (BHY) 2018, taxi.


Was hoping someone could help me with the torque settings for when I tighten it all back down.

I will be replacing 5 and 7 (reference diagram).
17103271757413165257404173804647.jpg
Thanks in advance.
Top
User avatar
Huskyxantia
Donor 2023
Posts: 2056
Joined: 30 Jul 2018, 22:11
Location: Surrey Kent sussex border
My Cars: Past cars
Xsara Picasso 2019 to 2022 r.i.p
Xantia mk1&2 1.9D & 2.0Hdi
Peugeot 206 sw 1.4hdi
Other models
Skoda fabia,escort van,ford ka,Vauxhall astra g car & estate, Vauxhall corsa b, Suzuki swift
Escorts mk 1,2,3,4,5 fiestas mk 1,2, Sierra diesel mk1 Mondeo mk1 diesel .
Peugeot 207 , 307sw

Now cars
Picasso 2.0Hdi now gone to scrappie
Citroen zx estate 1.9D the cherished one
Peugeot 206cc raised from the dead & saved from the crusher traded up to a 308cc
307sw traded for the 207 .

Wish list.
Peugeot 405 diesel
106 or 206
Mondeo Mk1 diesel once owned 1.8tdi was real nice.
x 429

Re: Oil cooler gasket replacement (torque settings)

Post by Huskyxantia »

I think its 25Nm , some one on here might confirm but im sure its about 25
Husky. :?
Top
Post Reply

Return to “Peugeot”