Will a early berlingo hub fit a 306
Moderator: RichardW
-
- Posts: 2
- Joined: 12 Aug 2019, 17:27
- Location: Belfast
- My Cars: Peugeot 106 1.5d
Peugeot partner
Will a early berlingo hub fit a 306
Hey I’m in serious need of a hub due to the wheel bearing circlip being seized in place and I was just wondering if I got a berlingo hub would the rest be the same,or would I have to change trackrods etc,many thanks
- Oldpug
- Posts: 482
- Joined: 07 Aug 2010, 11:15
- Location: Berkshire
- My Cars: Peugeot 406 GLX
Audi A3 TFSI S Line
Mercedes SL320
(In the past,just about every old Peugeot you can think of.) - x 64
Re: Will a early berlingo hub fit a 306
The only problem you may find is the pin on the lower ball joint is a different diameter, so watch out.
-
- Posts: 2
- Joined: 12 Aug 2019, 17:27
- Location: Belfast
- My Cars: Peugeot 106 1.5d
Peugeot partner
Re: Will a early berlingo hub fit a 306
Hey many thanks for the quick response I’ve got the hub on and the ball joint was luckily the same but I changed the two outer track rod ends and they don’t seem to let me screw them in enough the trackrod ends are sperious parts,do you know if that would be the reason?