Decided to repair some scratches on the front wing but during sanding I found more layers of paint. Looks like the previous owner had done some paintwork which he didn't tell me about.
I started sanding with 400 and finished with 800 grit.
I was planning to just spray the base coat and a few coats of lacquer but not sure how this would work with the other paint being there.
To prime or not?
Moderator: RichardW
- osx
- (Donor 2022)
- Posts: 761
- Joined: 08 Jun 2013, 20:09
- Location: Oxford
- Lexia Available: Yes
- My Cars: GSA X
BX 1.6
C5 X7 Auto
C5 X7x2 Manual - x 15
To prime or not?
C5 X7 Exclusive 2.0 HDi Auto
C5 X7 Exclusive 2.0 HDi Manual
C5 X7 Exclusive 2.0 HDi Manual
- GiveMeABreak
- Forum Admin Team
- Posts: 37444
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5742
Re: To prime or not?
It already worked once as you've only just noticed the old paint after taking the top coats of paint off - so I would just put on the new paint and lacquer as long as it's clean and grease free.
Please Don't PM Me For Technical Help
Marc
Marc