Car jumping out of 5th gear and now unable to select it
Moderator: RichardW
Re: Car jumping out of 5th gear and now unable to select it
The guy said it was off his car and was ok, but am going to have to trust him to a degree. The worn selector would explain why it kept jumping out and I am assuming that the wear is through loss of oil and I haven't helped when holding it in 5th gear when driving! I will take some tools and whip the cover off to have a look. At least I can see if thats ok on the second hand box. At least he confirmed it had the DP29 engraved on the box. Any idea what size the bolts are?
Re: Car jumping out of 5th gear and now unable to select it
Richard to make life easier for me would you know the part numbers for the driveshaft seals for either side please?
-
- Forum Treasurer
- Posts: 10898
- Joined: 07 Aug 2002, 17:12
- Location: United Kingdom
- My Cars: MK2 '17 C4GP 1.6 BlueHDi 120
'13 3008 1.6 HDi GripControl - x 1003
Re: Car jumping out of 5th gear and now unable to select it
Seals:
Part Number Description Quantity Price excl. VAT Price incl. VAT Total incl. VAT Selection
0000312146 SEAL 12.16 GBP 14.59 GBP 14.59 GBP (Right)
0000312144 SEAL 12.29 GBP 14.75 GBP 14.75 GBP (Left, original part number)
1608816780 SEAL 13.48 GBP 16.18 GBP 16.18 GBP (Left, replacement part number)
These seals are common though, so you can get them much cheaper than that - have a look on ebay at One stop gearbox shop -a pair is about £10.
Bolts on the end casing are possibly 11mm, plus the 19mm for the level plug.
Part Number Description Quantity Price excl. VAT Price incl. VAT Total incl. VAT Selection
0000312146 SEAL 12.16 GBP 14.59 GBP 14.59 GBP (Right)
0000312144 SEAL 12.29 GBP 14.75 GBP 14.75 GBP (Left, original part number)
1608816780 SEAL 13.48 GBP 16.18 GBP 16.18 GBP (Left, replacement part number)
These seals are common though, so you can get them much cheaper than that - have a look on ebay at One stop gearbox shop -a pair is about £10.
Bolts on the end casing are possibly 11mm, plus the 19mm for the level plug.
Richard W
Re: Car jumping out of 5th gear and now unable to select it
Many thanks for this. Do you have to remove all 11mm bolts plus the 19mm level plug one to get that cover off?
-
- Forum Treasurer
- Posts: 10898
- Joined: 07 Aug 2002, 17:12
- Location: United Kingdom
- My Cars: MK2 '17 C4GP 1.6 BlueHDi 120
'13 3008 1.6 HDi GripControl - x 1003
Re: Car jumping out of 5th gear and now unable to select it
Yes all of them AFAIK - CitroJim has helpfully provided a pictorial guide: BE3 Stripdown (Yours might not be identical - I think there is a bolt in the fork somewhere).
Richard W
Re: Car jumping out of 5th gear and now unable to select it
Thanks for that info Richard, ordered a set that can be delivered by Friday, £10.45. Picking Gearbox up tomorrow night.
EDIT - Got the gearbox and it looks good, selector is in good condition. Also received the oil seals today so just need it putting on now. Apparently it only did 70k
EDIT - Got the gearbox and it looks good, selector is in good condition. Also received the oil seals today so just need it putting on now. Apparently it only did 70k
Re: Car jumping out of 5th gear and now unable to select it
UPDATE: 5th gear changed over and all working also changed oil seals, so very happy driver.
-
- (Donor 2020)
- Posts: 1843
- Joined: 19 Jan 2015, 17:42
- Location: Manchester
- My Cars: '95 Xantia 1.9D automatic - 118k one of two? remaining
'97 306 1.6 XS, 24k, The ex-Haynes "Max Power" display car. Bought after being written off & stripped, now being rebuilt without the wide body
'96 ZX 1.9TD SX, 81k new resurrection project saved from the scrapper - x 217
Re: Car jumping out of 5th gear and now unable to select it
Good stuff,glad to hear you managed to find a low mileage replacement gearset. I realise you probably already know this, but the wear on the selector is due to holding the gear forcibly in place when driving. If you stop using 5th (or ideally stop using the car at all) until the nut is retorqued/replaced then this damage can be avoided and £75 can be saved. At least you've now got a box full of decent used spares should anything else go in future, although these boxes are tough as old boots, I've heard numerous stories of them being run with low oil (or even empty!) for many years, with failure only occurring when one was used for towing in that state so it's unlikely anything else has suffered too much from oil leakage.
'95 Xantia LX 1.9D-auto, Black, 118k
'97 306 XS 1.6i, Blaze Yellow, 24k
'96 ZX SX 1.9TD rolling shell, White, 81k
'97 306 XS 1.6i, Blaze Yellow, 24k
'96 ZX SX 1.9TD rolling shell, White, 81k
Re: Car jumping out of 5th gear and now unable to select it
Just joined the forum to say thanks for the info with regards tightening the nut up on the 5th gear.
Worked a treat and saved me money I can ill afford to lose at this time of year!
A bit more information for those who come across this issue in the future:
- there are three plastic clips that you will need to pull out when removing the inner wing lining. They are a pain to get out and take some force. New ones cost about 10p each from Citroen, so I'd advise you to get some in case you break yours.
- on my car the end casing had black multi-purpose sealing compound and it that was a pain to remove. I used an old credit card and lots of elbow grease to remove the compound in order to get a good surface. Make sure you have some liquid gasket ready to reseal!
- the end casing bolts are 11mm. The oil filler nut is 19mm. Dump plug is either 21mm socket or 8mm square plug key.
- the strange looking nut is in fact 28mm bi-hex nut. A standard 12 point 28mm socket will fit it (standard sockets won't), but you want a socket with a wall that isn't more than about 2-3mm, as when the nut goes further down the shaft it screws into a recess with about 3-4mm clearance around it (estimate!). It only goes in the recess by about 5mm. Failing that, I was able to tighten it up sufficiently by using a pair of mole grips on the pinning collar and turning it with those. Make sure you pin/stake the nut after tightening!
- there is very little oil in the 5th gear area if you jack the car up on the same side as the gearbox thus tilting the majority of the oil into the main housing, but some will come out so have a tray under to catch it. I completely changed my gearbox oil as it was dark brown. Remember to have some new transmission oil ready to finish the job!
Thanks all!
Worked a treat and saved me money I can ill afford to lose at this time of year!
A bit more information for those who come across this issue in the future:
- there are three plastic clips that you will need to pull out when removing the inner wing lining. They are a pain to get out and take some force. New ones cost about 10p each from Citroen, so I'd advise you to get some in case you break yours.
- on my car the end casing had black multi-purpose sealing compound and it that was a pain to remove. I used an old credit card and lots of elbow grease to remove the compound in order to get a good surface. Make sure you have some liquid gasket ready to reseal!
- the end casing bolts are 11mm. The oil filler nut is 19mm. Dump plug is either 21mm socket or 8mm square plug key.
- the strange looking nut is in fact 28mm bi-hex nut. A standard 12 point 28mm socket will fit it (standard sockets won't), but you want a socket with a wall that isn't more than about 2-3mm, as when the nut goes further down the shaft it screws into a recess with about 3-4mm clearance around it (estimate!). It only goes in the recess by about 5mm. Failing that, I was able to tighten it up sufficiently by using a pair of mole grips on the pinning collar and turning it with those. Make sure you pin/stake the nut after tightening!
- there is very little oil in the 5th gear area if you jack the car up on the same side as the gearbox thus tilting the majority of the oil into the main housing, but some will come out so have a tray under to catch it. I completely changed my gearbox oil as it was dark brown. Remember to have some new transmission oil ready to finish the job!
Thanks all!
Last edited by mrtwister on 22 Dec 2016, 13:34, edited 3 times in total.
- CitroJim
- A very naughty boy
- Posts: 49662
- Joined: 30 Apr 2005, 23:33
- Location: Paggers
- My Cars: Bluebell the AX, Polly the C3 Picasso, Pix the Nissan Pixo, Propel the duathlon bike, TCR Pro the road bike and Fuji the TT bike...
- x 6208
- Contact:
Re: Car jumping out of 5th gear and now unable to select it
I am very pleased this has been of use to you and a very warm welcome to the forummrtwister wrote:Just joined the forum to say thanks for the info with regards tightening the nut up on the 5th gear.
Worked a treat for me and saved me money I can ill afford to lose at this time of year!
Thanks too for posting the additional information, it is always most appreciated...
Jim
Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
Re: Car jumping out of 5th gear and now unable to select it
Any one got any more experiences that might help before I get stuck in thanks Patrick
- GiveMeABreak
- Forum Admin Team
- Posts: 37444
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5742
Re: Car jumping out of 5th gear and now unable to select it
The crystal ball is fresh out of crystals. Some details might help - what car, what model, what engine, better still a VIN and some more details of the problem....
Please Don't PM Me For Technical Help
Marc
Marc
- white exec
- Moderating Team
- Posts: 7445
- Joined: 21 Dec 2015, 12:46
- Location: Sayalonga, Malaga, Spain
- My Cars: 1996 XM 2.5TD Exclusive hatch RHD
1992 BX19D Millesime hatch LHD
previously 1989 BX19RD, 1998 ZX 1.9D auto, 2001 Xantia 1.8i auto
and lots of Rovers before that: 1935 Ten, 1947 Sixteen, 1960 P5 3-litre, 1966 P6 2000, 1972 P6 2000TC, and 1975 P6B 3500S - x 1752
Re: Car jumping out of 5th gear and now unable to select it
Yes, that has to be the best head-scratcher for a while now!
Throw some details our way, Patrick, and we'll see what we can come up with.
Throw some details our way, Patrick, and we'll see what we can come up with.
Chris
Re: Car jumping out of 5th gear and now unable to select it
03 Picasso new purchase occasionally drops out of 5th 2 l HDI Exclusive
assuming loos nut
torque required would be help full
gathered the nut is peened but can not have been done correctly
only on the picasso production line ?
ps any thread on central locking
only actually locking drivers door
thanks
assuming loos nut
torque required would be help full
gathered the nut is peened but can not have been done correctly
only on the picasso production line ?
ps any thread on central locking
only actually locking drivers door
thanks