207 hdi pulley noise

This is the Forum for all your Peugeot Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
johntom
Posts: 227
Joined: 31 Jan 2011, 19:22
Location:
My Cars:
x 1

207 hdi pulley noise

Post by johntom »

Hi
My 2010 207 1.6hdi (50k) has an occasional chirp that seems to come from the crank pulley area at tick over. I bought a cheap new replacement pulley mail order which I fitted but the noise is still there. To eliminate I removed the aux belt, the noise was still there so I then remove the pulley and started the engine, all quiet.
Question is, either the new pulley is as bad as the original (which doesn’t look bad) or could it be something else, definitely doesn’t do it with the crank pulley off though ?
johntom
Posts: 227
Joined: 31 Jan 2011, 19:22
Location:
My Cars:
x 1

Re: 207 hdi pulley noise

Post by johntom »

Just to update, the noise which is more like a tinney vibration is present with the crank pulley off, do suspect it’s timing belt related. Mines the 90 bhp, are any special tool required pin the pump and camshaft, if drill bits what diameter?
Thanks
User avatar
GiveMeABreak
Forum Admin Team
Posts: 36996
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5644

Re: 207 hdi pulley noise

Post by GiveMeABreak »

It’s probably all the pulleys. You can get a timing belt kit that contains all the pulleys too. You’ll find when they’ve been replaced that it will usually sound as new again. I had all mine done with the timing belt and it stopped all the noises.
Please Don't PM Me For Technical Help

Marc
Post Reply