307 SW Hdi RHR auxiliary pulley

This is the Forum for all your Peugeot Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
tmead
Donor 2023
Posts: 187
Joined: 06 Jul 2010, 23:30
Location: Cambridge UK
My Cars: Currently own:
308 1.6 HDi 90
Toyota Aygo
Toyota proace
208 1.2 Allure
x 10

307 SW Hdi RHR auxiliary pulley

Post by tmead »

Anybody know the part number for the pulley ? I've looked on servicebox, and it shows 0515.v9. I have one of these in original cit/pug wrapping and it is not right. The 0515.v9 pulley has a hole in the middle of around 30mm with a key slot. The one that I eventually took off the car (man that bolt is tight) has a hole around 12mm diameter and no keyway.

Anyway - I'm after one of the pulleys with the smaller hole in. Needless to say, almost all the secondhand pulleys on ebay are like the one I want, and every new one I can see a picture of is like the one with a large hole. All help appreciated !

I have a picture, but don't see any links to post it.

Tim
User avatar
Paul-R
Donor 2023
Posts: 6916
Joined: 07 May 2009, 16:24
Location: Wirral, NW England; Vaucluse 84, France
Lexia Available: Yes
My Cars: 2015 1.6 Blue HDi 120 Peugeot 308 Active SW
2013 2.0 HDi 163 C5 Exclusive Tourer
2003 2.0 HDi 110 C5 Exclusive Estate (Gone)
2001 2.0 HDi 90 Xsara Estate (Gone)
x 1369

Re: 307 SW Hdi RHR auxiliary pulley

Post by Paul-R »

tmead wrote:I have a picture, but don't see any links to post it.
It's a relatively new feature. viewtopic.php?f=9&t=56795
As I get older I think a lot about the hereafter - I go into a room and then wonder what I'm here after.

Inside every old person is a young person wondering what the hell happened.

"Trying is the first step towards failure" ~ Homer J Simpson​
tmead
Donor 2023
Posts: 187
Joined: 06 Jul 2010, 23:30
Location: Cambridge UK
My Cars: Currently own:
308 1.6 HDi 90
Toyota Aygo
Toyota proace
208 1.2 Allure
x 10

Re: 307 SW Hdi RHR auxiliary pulley

Post by tmead »

rps20170114_191514a.jpg
Here's the picture. Guess which is which !
tmead
Donor 2023
Posts: 187
Joined: 06 Jul 2010, 23:30
Location: Cambridge UK
My Cars: Currently own:
308 1.6 HDi 90
Toyota Aygo
Toyota proace
208 1.2 Allure
x 10

Re: 307 SW Hdi RHR auxiliary pulley

Post by tmead »

Had a chat with a guy in Pug cambridge recently, and he's telling me that the crank angle disc behind the pulley has been changed, and the new disc will provide location for the new pulley. He wasn't 100% sure though, and didn't have the disc in stock. Its coming up to needing a timing belt, so that will be the test - can I get the disc off to access the timing belt without damaging it....
tmead
Donor 2023
Posts: 187
Joined: 06 Jul 2010, 23:30
Location: Cambridge UK
My Cars: Currently own:
308 1.6 HDi 90
Toyota Aygo
Toyota proace
208 1.2 Allure
x 10

Re: 307 SW Hdi RHR auxiliary pulley

Post by tmead »

I hate to say it, but Pug were right ! The new crank angle disc is a lightweight thin thing rather than the older style with a boss in the middle on the crankshaft. Part numbers can be dug out of services if needed.
Post Reply