Wheel nut cover remover

Yes, place your time and money saving tips here.Nothing illegal or dangerous please!Motoring related only please.

Moderator: RichardW

Post Reply
Richard_C
(Donor 2016)
Posts: 535
Joined: 15 Oct 2011, 17:31
Location: Cambridge, England
My Cars: C4 Picasso 1.6 Blue Hdi 120 Manual Excl+ 2016
C3 1.2 Puretech 110 Auto Flair 2017
x 99

Wheel nut cover remover

Post by Richard_C »

Ever since hard chrome plating was outlawed, most wheel nuts on alloys have little shiny plastic covers that you need to pull off to get a wheel brace on. That can be awkward if they are in deep holes on the wheel. I've struggled on one or two cars if they haven't been off for a while.

Just got a new (to me) C4 Pic and bought a spare wheel/jack and so on as I don't much like relying on aerosol sealant in remote places. But I don't have the little plastic tool to get to pull the nut covers off. Looked on the web and saw all sorts, plastic, wire and so on, and some forums had long threads about the difficulty of removing covers.

So I had a think.

Get or find a teaspoon, inexpensive stainless one, check that the handle fits between flat of nut cover and side of hole. Place teaspoon in a metal vice with about 2mm of handle sticking up. Whack hard with a hammer to bend it over so it has a little lip on the end. Ideally do another one so you have a pair so you can use one each side if the cover is really stubborn.

Perfect, and you can stir your cup a soup with it as well.
Richard_C

Current: , C4 Picasso 120 BlueHdi, C3 1.2 Auto
Past Citroens: Dyane (x2), 2CV, Visa, BX (x2), Xantia, Xsara Picasso, C3 (x2) C5 X7 Tourer, Synergie 1.9TD, C1
Others: Hillman Hunter, Cortina Mk 1, Maxi, VW Type 2, Granada, SAAB 900, SAAB 9-5, R5 Gordini
User avatar
Sloppysod
Donor 2024
Posts: 964
Joined: 23 May 2015, 23:35
Location: North Wales
My Cars: Citroens
1 x GS, 1 x GSX (Banger raced), 1 x GSA,
2 x CX Famililles, 1 x CX GTI,
BX, XM, Xantia, C5 Mk1,
C4 (Coupe), C4 (B7),
C5 (X7)

Renault
R4 Van
Fuego
Clio Campas
x 212

Re: Wheel nut cover remover

Post by Sloppysod »

You can get the correct little tool from the bay, look at item number 281298924901, this also helps bolt removal. £5.15 Inc p&p.


Sent using Tapatalk, on MY LG G2, [emoji46]
Stu 🏴󠁧󠁢󠁷󠁬󠁳󠁿

"Some cause happiness wherever they go, others whenever they go"Oscar Wilde (1854-1900)

Major interventions
C5 Steering rack @ 58,000 mi
4 discs & Pads @ 63,585 mi
2 (AM6) oil exchanges @ 58,876 & 72,378 mi
Richard_C
(Donor 2016)
Posts: 535
Joined: 15 Oct 2011, 17:31
Location: Cambridge, England
My Cars: C4 Picasso 1.6 Blue Hdi 120 Manual Excl+ 2016
C3 1.2 Puretech 110 Auto Flair 2017
x 99

Re: Wheel nut cover remover

Post by Richard_C »

But not as much fun as whacking a teaspoon with a hammer :-D
Richard_C

Current: , C4 Picasso 120 BlueHdi, C3 1.2 Auto
Past Citroens: Dyane (x2), 2CV, Visa, BX (x2), Xantia, Xsara Picasso, C3 (x2) C5 X7 Tourer, Synergie 1.9TD, C1
Others: Hillman Hunter, Cortina Mk 1, Maxi, VW Type 2, Granada, SAAB 900, SAAB 9-5, R5 Gordini
Hell Razor5543
Donor 2023
Posts: 13726
Joined: 01 Apr 2012, 09:47
Location: Reading
My Cars: C5 Mk2 VTX+ estate.
x 2993

Re: Wheel nut cover remover

Post by Hell Razor5543 »

Just so long as you are whacking the teaspoon with the hammer, and not the nail (on your thumb).
James
ex BX 1.9
ex Xantia 2.0HDi SX
ex Xantia 2.0HDi LX
Ex C5 2.0HDi VTR
Ex C5 2.0HDi VTR

C5 2.2HDi VTX+
Yes, I am paranoid, but am I paranoid ENOUGH?
Out amongst the stars, looking for a world of my own!
ekjdm14
(Donor 2020)
Posts: 1810
Joined: 19 Jan 2015, 17:42
Location: Congleton
Lexia Available: Yes
My Cars: '95 Xantia 1.9D automatic - 109k one of two remaining
'03 206 GTi180 - 97k in pieces being brought back up to snuff
'03 206 1.9TD - home-built veg-fuelled B-road bruiser
'99 306 SE 2.0i cabriolet - 92k awaiting service work ready for next summer
'97 306 XS 1.6i 3 door, Bianca White, from dead 12 years & seized solid to road legal in 7 days
x 212

Re: Wheel nut cover remover

Post by ekjdm14 »

Richard_C wrote:Ever since hard chrome plating was outlawed....

Really? I had no idea! Why is this? I assume there are exceptions, otherwise the motorcycle industry is a bit buggered as far as forks go... :shock:
'95 Xantia LX 1.9D-auto, Black, 109k
'03 206 GTi180 94k in surgery
'03 206 1.1S XUD9TE/veg project :mrgreen:
'99 306 2.0SE cabriolet 95k summer toy
'97 306 XS 1.6i 99k sat 12 years, fixed in 7 days, 150mile maiden voyage :rofl2:
User avatar
van ordinaire
(Donor 2017)
Posts: 2537
Joined: 23 Jun 2015, 14:45
Location: Live & work in London but weekend in Devon (or do I now live in Torbay & work in London?)
My Cars: Citroens:-
'81 2CV Club (quietly sleeping in a parallel universe)
'05 (yes, really) C15
'97 Xantia Exclusive estate
others:-
'96 Jeep Cherokee Limited - the "donor"
'99 Jeep Cherokee Orvis - the green one
'97 Jeep Cherokee Limited - the red one
'99 Cadillac Seville STS
'96 Cadillac Eldorado ETC
& numerous what might be described as abandoned projects!
x 405

Re: Wheel nut cover remover

Post by van ordinaire »

Hell Razor5543 wrote:Just so long as you are whacking the teaspoon with the hammer, and not the nail (on your thumb).

Shades of " . . . & when I nod my head- you hit it with a hammer"!

Seriously though, even my '96 had these covers (although they are "tin") so don't think it has anything to do with Euro chrome regs. They come off easy enough using a wall drive socket (they are so thin, the one for removing the buts is fine) & wiggling it bit.

Cadillac ones are, of course, one step better - they screw on to the nut, which has a short threaded section below the flats. Curiously THEY seem more prone to shedding than the interference fit press-on ones.
Citroens:-
'81 2CV Club :cry:
'05 C15 :!:
'97 Xantia Exclusive estate [-o<
others:-
Jeep XJ Cherokees x 3 :?
'96 Cadillac Eldorado
'99 Cadillac STS :|
& the numerous "abandoned projects" #-o
Post Reply