French Car Forum

Hi ,I am having trouble with my 59 plate C5 x7 ,in the morning I turns over for quite a while before it fire's up .it will turn over for about 10 to 20 seconds , sometimes it catches straight away,then stops ,but then starts when I turn the key again.its is all most like the fuel is draining back to the tank ,and needs to turn over for a while to...

Hello There,
I had a problem with my Lexia install and now wish to use the Diagbox uninstall cleaner v1.0a but it seems to be taking forever. Does anyone know roughly what sort of time this takes please?
Thanks
Darren

hi all i am new to this fourm and to diagbox. i have installed diagbox and updates up to v7.76 i am trying to run the update (8.18) v7.76 to v7.82 but its asking for a password the readme doc with the files says the password is Very Simple! but when i enter it its not accepted i have tried varations of the password.

anyone got any ideas or...

can anybody help I've got a 1.8 petrol Citroen exantia 2001 forte 16v I was driving it the engine just died. I'm just getting battery light no other lights are coming on the dash when you first turn the ignition on eg no abs light no engine management light my fuel gauge is not working and the engine will not start. it will turn over just not...

Hi all..

Ive recently picked up a netbook, with windose XP on it.. Im trying to installl Diagbox from Easy Diagnostic .. it unpacks installs then when it comes to Customer name Im told to enter easy123 .. which I do, I then get a screen for activation with PC Identifeir and name info but in the box below it says NO CODE NEEDED.. so I assume I...

Good Afternoon,

I just wondered if anyone could recommend a good OBD2 reader at up say £100 for use on my Wife's 2004 1.4 C3 and my Xsara Picasso 1.6hdi.

Got an EML light on on the C3 after a cold damp early morning start - the car went into limp mode but returned to normal albeit with the light still showing and the Picasso is showing a failed...

Issue with my clio.
Not driven for 2 days but was driving fine before

Did start Monday morning with loads of bleeps and Brake fault message on dash, but had to turn it off to nip inside.
Back within 30 secs, but won't turn over, won't click....dash lights all come on and go off, except AbS, EML and the BRAKE FAULT message. No beeps, no turning...

Hi all, just helped my daughter get what we thought was a nice little car! Turns out there's a bit of a problem. So it's a 2006 Citroen C2, but is sometimes it starts fine, then others it turns over with loads of battery life but won't fire. It's going in the garage on Tuesday, I just wondered if anyone can give a few pointers please?

Hi there
I will post this here, because it relates specifically to the DS5, but I suppose it should also be in 'Diagnostics'
I’m trying to update my Diagbox so that it will read, and erase where possible, any faults found on my recently acquired 17 plate DS5 Prestige Auto. I currently have a Rev C full chip Actia clone with 4.3.7 firmware running...

Hi Guys,

Bit new here so hoping you can help me out because there seems to be a lack/conflicting information.

I drive a petrol 2011 Citroen DS3 DSport 1.6 THP 156 and driving home from work today I got an error code pop up, assumed it was the turbo warning since this popped up a couple of days ago so assumed not much to worry about. On the way...

Just done an oil / filter change and reset the counter using the speedo knob on my Dispatch but I'd like to change the interval from 20000 to 10000. Hooked diag up and went into maintenance , service schedule ,change schedule, asks me for my RPO which I think is 12147, asks my if I have a HY engine, said no, asks if I want to change the schedule,...

And so before I got the chance to deal with the outstanding cam belt issue, my dippy daughter has lost the only ignition key.

2003 307 1.6 16v VF3**************[VIN obfuscated, can be read by forum staff].
I do not have a key blade copy or the mechanical key code.
Nor do I have the security key code.
I do have a virgin transponder and Diagbox.

I believe the mechanical and security key...

welcome everybody I am new and please help. I purchased the lexia3 7.83 from AliExpress and installed the supplied software on the CD. And I have a problem that the program does not respond to the electronic control unit. The program works well on other systems such as the transmission and airbags. . When entering the ECU it gives me this...

Hi all,

Thinking of investing in this software as I have a Windows 10 laptop.

You can basically buy a licence for 30 euros. A licence covering a manufacturer.

Does anyone on here have it and if so, what’s your experience of it?

Thanks

I was wondering if it might be worth my while buying a copy of this service box from Jim at ED.

It says 3 CDs, which I doubt.
Not as bomb proof as now having to ask this forum to look up part nos. but that's a pain for all, especially for every silly thing.
One of my daughters has just got hold of a very low mileage 307 1.6 2004- so well within...

I'm a new member I own a citroen xantia 1.8i forte abs light staying purchased a laptop with lexia already loaded I can get as far as putting in my model and vin number and that is as far as it goes I have used it on Peugeot van which was a bit newer than my xantia which is registered 2000 the is supposed to do older citroens .the system is lexia...

One thing I've been meaning to ask as I have been using the Lexia a lot is this:-

When you erase fault codes it tells you that you have upto 50 reads of an ECU.

My after sales counter on the HDi is now on read 30.

What happens when I get to 50? Is it possible to reset it somehow?

PLEASE don't tell me it'll mean a complete uninstall and...

Good Morning, Good Afternoon and Good Evening to you all.

VEHICLE - Citroen Relay 2012.
Coming back from a short road trip and about 50 miles from home this hose burst on the motorway fortunately 2 miles from a services. I was able to cut of the hose to just below the hole and put the metal plug back in and drive again but 20 miles into the...

Could somebody please tell me which firmware version is needed for Diagbox v7.83. Will version 4.3.3 still be ok? Marc's post on the subject only goes up to v7.76. I have a new RevC kit and may have to flash it.
Thanks

What is the suited oil for Peugeot 308 2009 model? I could not find Total Fluide DA in UAE. Here, all are using ATF for power steering and transmission. I couldn't find any specification in the owner manual. please advice.

Some of you may know I bought a Ford Focus estate as I couldn't find a 307 SW locally. I serviced it fettled it, brought the wheels to get new tyres booked the NCT (MOT) etc then I was messing with it and decided to cut the grass. Put the key in my pocket and on the return mow I shredded the key. I found everything but the chip and battery. Mobile...

After much nashing of teeth etc got a laptop running with xp pro to run diagbox. BUT it appears there is no communication between diagbox and suspension control unit during globel test it appears in RED Communication Error. All previous global tests have been the same but I just thought it was me with electronics :rofl2:

I suspect a broken wire...

Does anyone have experience of reading ECU's they'd like to share?

Specifically, what cheap hardware/software will work with my cars?

Hello,

Newbie to the forum.

I live at Oswestry and have Diagbox Lexia 3 PP2000 amongst other platforms.

I can offer assistance to fellow forum members for a small cost compared to the main agents.

My history retired motor engineer, ex TT Competitor. When it comes to motors and vehicle electrics,
I actually know what I am doing...... ( well,...

Does anyone know where I can get our 306 2.0 8v diagnositic check with the two pin plug in the engine bay in the area of stoke on Trent cheers

having got a laptop usable i have uploaded the disc to it and got as far as activation and its says ring the hotline for a number to put in what bloody hot line i cant figure this out anyone point me in the right direction please

I used for some 3-4 years bluetooth OBD II / ELM 327 adapter (china), and worked OK. Android aps (Torque, and others..). One day, I was reading data with Torque (at same time same phone is connected on cars hands free), I had 5 calls from wife (that rarely calls me, but than only God knows why..). And at one moment, no more data. I couldn't...

Which is the suited petrol for Peugeot 308 turbo 2009 model? 95 octane or 98 octane?? In the fuel door it has shown Ron 95 and Ron 97..

Has anyone a vgate maxiscan? Is it any good.
Car is a 2012 c3 picasso 1.6 hdi.
Cheers Steve.

Hi are there any members out therein the northnorfolk area that could help me out with a diagnostic test of my car please

First time of posting here and it's a cry for help :(

Car is question is one of our fleet of french cars , a 2003 Xsara Picasso 2.0 petrol automatic.

We've ownded this car on and off for around 7/8 years ( we let our neighbours use it for 5 years on loan ).

After getting it back and fixing lots of little stuff it flew through an MOT about 3...

A quick question..

Depollution system faulty And P0504 are inter-related??

FUEL INJECTOR CLEANERS are really useful for petrol Peugeot car??

What is the optimum speed for Peugeot 308 Turbo hatchback car for maximum mileage??

just purchased a DS4 2.0 bluehdi dsport on a 2015 plate.
connected my actia interface revision c full chip and diagbox software, the issue is it will read almost all ecu’s the main one it will not read is engine ecu (not recognised) although it lists 8 fault codes which are 6 digit so assuming they are sporadic codes.
First thoughts was diagbox...

Hi All,

My diagbox is not communicating properly with the car again.

It loads up and when I choose the correct model it finds the VIN but when I carry out a Globe test it states no dialogue.

It has been working previously but it's getting very frustrating.

Thoughts please,

I will be speaking to Jim at Easy Diagnostics tomorrow.

Kenny

Dear team,
Yesterday, I accidentally dropped my OBD scanner through the hole below the OBD scanner port. It landed near the gearbox lever which I can see. I tried to put my hand inside but I can't pass through. Please advise me what to remove to take it back?? I removed some of the parts from the gear panel. still, I'm not sure what else to...

This is a repeat topic as the original appears to have gone missing in the glitch over the weekend. I am hoping someone could turn off my tyre monitor for me as the car has had 2 sensors removed by the previous owner and the alarm is not only irritating but it may have the cry wolf effect and mask a real issue should one occur. I have pm'd some...

hi all... need some info if possible , I bought diagnostic equipment diabox and lexia for my citroen c4 Picasso I need to reprogram the bsi but stopped by user and password does anyone no how to get passed this I've looked googled and had no luck . Hope some one can help me on this kind regards steve
I've attached a pic of the athetification screen

I am frantic to move an 806, outside my Easter host's address in Southampton.

There has been a chattering noise, isolated to a relay situated next to the EMU.

Local resources are unhelpful/unavailable on necessary time scales.

Suggestions include checking fuses and earth connections, and finding specialist advice on the EMU function.

I wonder...

My current car is a Citroen C5 X7 1.6 HDi estate, 2010, 80000 miles

last week whilst driving I had a sudden lost of power and the car went into limp mode, a small hole was found in the turbo intercooler pipe which had been caused by the dip stick rubbing against it. Pipe has been fixed and the following codes reset
P1162
P0489
P0409
P0104
P0113...

hi im looking for advice on what version diagbox to install up to ?
looked through the version change log on here and the relay euro 5 gets a lots of mentions
the vans a 2012 euro 5 engine

My car is 2009 model Peugeot 308 petrol. It shows Depollution system faulty warning msgs sometime during the engine start and engine goes to limp mode along with Engine system light ON. What I do is, I use the OBD scanner and clear the faulty code and drive off the vehicle. Is there any problem in doing so??

Good evening all,

Just a quick question (hopefully).
I need to replace the brake fluid on my C4 Pic Exclusive 2014, is there any specific sequence/requirements/instruction or even tooling that is required to do this.

Many Thanks
Zane

Good evening.

My 2009 C5 X7 will not release the electric parking brake, bleeping and displaying various messages, 'anti roll back faulty' , 'Handbrake faulty', 'hand brake not applied' etc.
I have diagbox but get the message 'no communication with the ecu' under secondary parking brake.
Does anyone have suggestions as to what to try next?
Thanks...

Hi all,

I just fired up diagbox for the first time in about 18mths and I got this error message:

Error Code 20 - the licence File is not Coherent - reinstall Diagbox

How do I solve this one?

Hello all I have a bsi issue with my c4 Picasso

No indicators on n/s of car

I need to replace a bsi and I wanted ask if anyone would know if I need to match the whole part number

I've jumped the gun and bought a digital download of Diagbox v7.57. I did not know that the download was time limited.
However, the pc that I intend to use is not ready yet. Bits of hardware needed are still in China!
I there a way to get this download on to USB, or whatever?
Easy Diagnostics appear to advertise that my purchase would give me...

Hi Hope im in the right area. I am looking for a diagram of the relays on my C5 X7 Tourer. Specificly Under the engine bay fuse Box. Something is ticking under there. i intend on tacking a look tomorrow. Any Help would be Apppreciated.

Hi,
finally... after my C4 Picasso (UD, VTI 120 engine, 2011 build) makes me crazy with ABS / ESP warnungs which I can't read with a generic OBD2 reader I got a Lexia 3 full chip package including Diagbox software.
I managed to get it installed on an old laptop and it also recognizes the box, I got the software updated till 7.58 so everything fine...

My lights are not working properly
One side is fine.
Other side dip beam working not main beam
Fuse ok bulb ok .There is no power to the fuse.
I've been told it is the fuse board.
Does any one know if this is correct
Peugeot 206 cc 1.6 tdi year2005

Hi all,i am seeking some advice on deactivating the ebs on a picasso 2009 mk1,i am going to change rear discs and pads hopefully this week
I have got diagbox,my question is,in diagbox i see two options to put brake into release mode either removal of cables,or removal of the
actual ebs motor,I have a workshop manual,but it just tells me to use...