Citroën

Moderator: RichardW

42847 topics

Page 1 of 857
- Jump to page:
1
2
3
4
5
…
857
Next

Most liked posts	Author	Posted	Liked	Forum
Recognising the contributions of Marc "GiveMeABreak"	Jay-Bruce	28 Mar 2022, 04:20	41 times in total	Citroën
Adblue tank repair details	Stuart W	06 Mar 2024, 15:50	7 times this year	Citroën
Diagbox and depressurising	HelioMV	22 Apr 2024, 11:38	3 times this month	Citroën
Xantia ACTIVA 2ltr (TaffyTiva)....the reserection begins !	Stickyfinger	23 Apr 2024, 16:16	2 times this week	Citroën
C4 auto lock/unlock	the2ems	Yesterday, 18:39	Once today	Citroën

Announcements

Statistics

Last post

PSA Electrical Diagrams - Wiring & Symbols Codes Index

by GiveMeABreak » 09 Dec 2023, 17:48
Posted in Diagnostics
Replies: 0
by GiveMeABreak » 09 Dec 2023, 17:48 » in Diagnostics

PSA Electrical Diagrams - Wiring & Symbols Codes Index

The following will cover most basic equipment, but will exclude later systems & Tech.

PSA Electrical Diagrams Introduction - Function and Constitution of Codes
PSA Electrical Diagrams - Coding of Functions
PSA Electrical Diagrams - Component Coding
PSA Electrical Diagrams -...

Replies: 0
Views: 33100

Last post by GiveMeABreak
09 Dec 2023, 17:48
Citroen, DS Automobiles and Peugeot Official Part Number Requests

by GiveMeABreak » 15 May 2021, 13:55
Last post by GiveMeABreak » Today, 14:02
Replies: 2041
by GiveMeABreak » 15 May 2021, 13:55
1

…

133

134

135

136

137
First post

Please make all your Citroen , DS Automobiles or Peugeot Parts Requests on this thread

This thread is only for donating members who wish to request official part numbers or Parts Diagrams.

Please don't post technical queries or ask 'how to' questions here. Create a thread in one of the main Citroen / Peugeot Forums for these queries....

Last post

Hello
could anyone help me out with the part number for the 1998 peugeot boxer 1.9td injector pump cradle/carrier/support bracket please.
Thanks
If this is for your VIN ending 475, then let me know the specific item numbers from the diagram below for which you want part numbers:

moomoo inj supp.png

Please ask for any future parts in this...
Replies: 2041
Views: 551228

Last post by GiveMeABreak
Today, 14:02
Airbag, Dashboard, Seat Belt & Airbag ECU Repairs

by GiveMeABreak » 24 Jun 2020, 17:01
Last post by 407 » 07 Mar 2024, 23:42
Posted in Useful links
Replies: 64
by GiveMeABreak » 24 Jun 2020, 17:01 » in Useful links
1

2

3

4

5
First post

Just for members to be aware that airbagteam.com based in the UK are offering a 10% discount to FCF members on any of their services.

The FCF does not endorse any company directly, but thought this would be of use to members.

Full details of their services and the discount can be found here:

Airbag, Dashboard, Seat Belt & Airbag ECU Repairs

Last post

Re the 407 door seal issue and airbag warnings, after a few days of rain and testing with the hose, I gave up as water was still pooling on top of the bottom door seal and then running inside the car.

My solution was to put a few holes thru the seal with a leather hole punch tool which seems to allow the water to exit (the door seal gets squashed...
Replies: 64
Views: 78781

Last post by 407
07 Mar 2024, 23:42
Important Information concerning access to PSA parts data

by xantia_v6 » 19 Mar 2020, 04:19
Last post by GiveMeABreak » 14 Nov 2021, 07:21
Posted in Forum News, Announcements and Issues
Replies: 88
by xantia_v6 » 19 Mar 2020, 04:19 » in Forum News, Announcements and Issues
1

2

3

4

5

6
First post

As some of you may already have realised, PSA (Citroen, DS Automobiles & Peugeot) have this week (from 16/03/2020) decided to close off free access to parts information.

The public version of PSA's ServiceBox, which is the official source for parts and information has had a freely accessible parts system for registered garages, and individual...

Last post

Please note: This Thread is now Locked.

Please Make All Your Citroen or Peugeot Parts Requests Here

All parts requests from this topic have been moved there.
Replies: 88
Views: 118532

Last post by GiveMeABreak
14 Nov 2021, 07:21
New PSA Heritage Parts for Classic Cars

by GiveMeABreak » 11 Oct 2019, 16:18
Last post by white exec » 24 Jan 2020, 16:49
Replies: 3
by GiveMeABreak » 11 Oct 2019, 16:18

First post

Parts for Classic / Older Citroen, Peugeot Renault Vehicles

This may be of interest to Members with older vehicles where getting parts is a struggle and for those not already aware of the site.

PSA are embarking on a project to provide some supplies of original and re manufactured parts for older vehicles and classics, and have made it a...

Last post

I'm trying them for anything showing up as NFP now.
Sometimes hit lucky.

Replies: 3
Views: 34958

Last post by white exec
24 Jan 2020, 16:49
Revised Easydiagnostics Discount Procedure

by GiveMeABreak » 03 May 2018, 17:22
Posted in Forum News, Announcements and Issues
Replies: 0
by GiveMeABreak » 03 May 2018, 17:22 » in Forum News, Announcements and Issues

Please note that there is a new procedure in place for members wishing to take advantage of a 15% discount off products from Easydiagnostics.

The old discount code that was entered into the checkout is no longer valid, as a result of the code being propagated over the Internet.

After discussions with Jim from ED today, we have agreed a new...

Replies: 0
Views: 37262

Last post by GiveMeABreak
03 May 2018, 17:22
Supersticky

by myglaren » 04 Jan 2010, 18:44
Replies: 0
by myglaren » 04 Jan 2010, 18:44

All sticky threads are now to be found in the new ¨Supersticky¨ forum - for the time being at least.

Replies: 0
Views: 21206

Last post by myglaren
04 Jan 2010, 18:44

Topics

Statistics

Last post

Eolys?

by wizzer59 » 08 Nov 2012, 00:17
Last post by GiveMeABreak » 22 Apr 2024, 15:58
Replies: 633
by wizzer59 » 08 Nov 2012, 00:17
1

…

39

40

41

42

43
First post

Ive been told there are two types eolys, what goes in mine? its a 02 C5 2.2HDI 136 Exclusive hatch, been looking at Pat fluid DPX 42/176 is that ok?

Last post

Unbelievable!

At the end of the day they are in breach of the selling regulations as they are advertising a genuine PSA product from the photos, with official part numbers and packaging, yet are deceitfully selling an inferior unbranded 'who knows what the hell it is' alternative.

I'd report them as such and get them to pick it up post paid.

I...
Replies: 633
Views: 165812

Last post by GiveMeABreak
22 Apr 2024, 15:58
C5 (X7) Component Failures /Faults / Replacements Poll

by GiveMeABreak » 01 Mar 2018, 18:21
Last post by Stickyfinger » 26 Feb 2024, 07:55
Replies: 107
by GiveMeABreak » 01 Mar 2018, 18:21
1

…

4

5

6

7

8
First post

C5 (X7) Component Failures /Faults / Replacements Polll

X7-Saloon.png X7-Tourer.png

This is just an experiment to see if this is something that would be of interest to members and could be extended to other models. There would seem to be common and not so common part failures, so I thought an ongoing poll may be useful for members to record...

Last post

We have not been afflicted by the Steering Rack failure but both of our X7 models are conventional suspension.
Could LDS be causing the failures with the X7 racks? I know earlier models were not affected, but is it possible that the seals in the earlier racks were designed for LDS? Later racks were they designed for Power Steering fluid? Or are...
Replies: 107
Views: 22955

Last post by Stickyfinger
26 Feb 2024, 07:55
C5 X7 rear hydraulic pipe-hose stainless substitute

by Svod » 28 Mar 2023, 15:11
Last post by Dunkah » 05 Feb 2024, 17:33
Replies: 29
by Svod » 28 Mar 2023, 15:11
1

2
First post

Hi everyone,
Two years ago I was forced to change rear hydraulic pipes on my ’09 x7 2.2HDi cause one of them leaks. Whereas the pipes was unavailable to buy here I decided to create substitute from original. I was working on it with my colleague. We tested almost 10 pairs during last year and half and we can now manufacture them for C5 X7
Citroen...

Last post

Hi svod, good work, congratulations.
I don’t suppose you might consider re manufacturing the steering pipes at all. They come up in the forums time and time again and are no longer available or manufactured by Citroen, I certainly would buy a set or two if they were available.
Thanks
Replies: 29
Views: 15813

Last post by Dunkah
05 Feb 2024, 17:33
LDS Tank Bursting Warning Labels

by GiveMeABreak » 05 Mar 2019, 15:11
Last post by GiveMeABreak » 08 Jan 2024, 18:13
Replies: 49
by GiveMeABreak » 05 Mar 2019, 15:11
1

2

3

4
First post

Attention C5 and C6 Owners

Another member of the Forum recently had his C5 X7 LDS tank explode at a recent tyre fitting session, when the vehicle was lowered back to the ground.

For those unaware, the C5 and C6 should have the suspension raised to the highest position and the LDS tank cap removed whenever the vehicle will be lifted off the...

Last post

X7 27 LDS Tank.png

(1) Power Steering - Suspension LDS Tank, part: 4009V8, £97.09
Replies: 49
Views: 82473

Last post by GiveMeABreak
08 Jan 2024, 18:13
THIS is why you must remember to depressurise

by Stickyfinger » 16 Apr 2023, 09:50
Last post by momag46 » 13 Dec 2023, 17:28
Replies: 5
by Stickyfinger » 16 Apr 2023, 09:50

First post

THIS is why you must remember to depressurise .......... never forget to do it when working on older Citroen models

Last post

I worked as an inspector at Fiat Allis in the late 70s, early 80s. They made wheel loaders with a bucket on the front. To test the hydraulic pressure we used to put the bucket on the floor and work all the system with the engine off to depressurise the system. Then, on a set of steps, remove a plug and fit a pressure gauge. One of the guys did all...

Replies: 5
Views: 4546

Last post by momag46
13 Dec 2023, 17:28
Gauging interest in upcoming production run of LDS Pipe Fittings

by Jay-Bruce » 04 Sep 2022, 16:53
Last post by darbuck » 28 Sep 2023, 20:21
Replies: 82
by Jay-Bruce » 04 Sep 2022, 16:53
1

2

3

4

5

6
First post

TLDR: I'm going to be making and selling LDS pipe ends, who's interested in buying some?

Hi, some of you may already know me, but for those that don't, Jay Bruce is my real name is my forum name, no masks or secrets, I'm a freelance engineer, and I'm also a citroen enthusiast, the first car I can remember was our CX estate, later my parents in...

Last post

Hi Jay , I think you are right the most logical approach to this is to use the best available materials I had considered galvanized fittings but I have had a few experiences with calipers that were just rotted together with galvanized fittings.

My concern is the pinion housing is aluminium so a small risk of galvanic corrosion with the cuni. I...
Replies: 82
Views: 9618

Last post by darbuck
28 Sep 2023, 20:21
Check your POSITIVE batery lead!! PICS ADDED!!

by citroenxm » 19 Jan 2012, 12:39
Last post by Carole_Heard » 08 Apr 2023, 14:33
Replies: 122
by citroenxm » 19 Jan 2012, 12:39
1

…

5

6

7

8

9
First post

So.. this week, I learent a bit about potetiial fire hazard.. Even on LATE Xantia HDi's...

Main car in Question as in my blog.. Mums Y reg 2001 HDi 110.

Basically, the car failed to start and had always been slow to start.. unit it failed this week. So thinking as quick as sticking a new battery on.. this was fine untill I looked a bit deeper,...

Last post

This is a result of using crimp terminals and untinned wire.
DC circuits attract atmospheric ions that provoke corrosion in the positive side of the circuit. This eventually causes the copper in stranded wire to develop surface corrosion, insulating each strand from its neighbours.
Crimp connections make electrical connection to the strands of the...
Replies: 122
Views: 56313

Last post by Carole_Heard
08 Apr 2023, 14:33
Possible source for some hydraulic parts for Xantias

by xantia_v6 » 25 Apr 2019, 03:43
Last post by octinum » 01 Oct 2022, 18:11
Replies: 17
by xantia_v6 » 25 Apr 2019, 03:43
1

2
First post

appears to be a Turkish supplier of hydraulic parts who is attempting to get into the markiet of supplying after-market spares for Xantia parts that are now obsolete. Their pricing seems very reasonable.

I have no other knowledge of the company.

Last post

You may be interested in this topic: which describes and upgrade to the HA2 system, and I think has some information about damper elements on the center spheres.

I'm so going to stalk you online and find you to present a bottle of Turkish Raki if I ever travel any country near you. :-D Thanks for giving me tonight's reading!
Replies: 17
Views: 5834

Last post by octinum
01 Oct 2022, 18:11
Stellantis Recommended Engine Oils Updated February 2024

by GiveMeABreak » 17 Feb 2021, 19:05
Replies: 0
by GiveMeABreak » 17 Feb 2021, 19:05

Article Updated to Reflect Changes to Specifications and Oils from February 2024

How To Use This Guide:

First, lookup the Code for the country your vehicle is being used in from the Country Tables. Next, scroll down until you find the tables for your Country (A, B, C or D). Next, cross reference your vehicle's Engine Code in the tables...

Replies: 0
Views: 5428

Last post by GiveMeABreak
17 Feb 2021, 19:05
Citroen Owner Handbooks

by GiveMeABreak » 13 Aug 2019, 19:34
Replies: 0
by GiveMeABreak » 13 Aug 2019, 19:34

If you don't have your Citroen owner's manual, you can view most of them online or in most cases download a copy as a PDF, or in some cases just the relevant section required.

Not all early models are included.

Just follow the link, select your preferred language from the top right corner
Then select the model
Now select the car image and...

Replies: 0
Views: 7098

Last post by GiveMeABreak
13 Aug 2019, 19:34
Citroen Steel and Alloy Wheel Torque Settings

by GiveMeABreak » 22 Apr 2019, 10:50
Replies: 0
by GiveMeABreak » 22 Apr 2019, 10:50

Correct Wheel Torque Chart for Citroen

Vehicles Steel Rims Aluminium Rims
C-Zero 10 daNm 10 daNm
AX 9 daNm 10 daNm
SAXO 9 daNm 10 daNm
C1 10 daNm 10 daNm
C2 9 daNm 10 daNm
C2 China 9 daNm 10 daNm
C3 9 daNm 10 daNm
C3 Pluriel 9 daNm 10 daNm
C3 (A51) 10 daNm 10 daNm
DS3 10 daNm 10 daNm
C3 Picasso 10 daNm 10 daNm
C3...

Replies: 0
Views: 6094

Last post by GiveMeABreak
22 Apr 2019, 10:50
Diagnostic Equipment Advice

by myglaren » 18 Nov 2016, 17:01
Last post by myglaren » 18 Nov 2016, 17:50
Replies: 2
by myglaren » 18 Nov 2016, 17:01

First post

Please note the following points when using Lexia, Planet or Clip diagnostic equipment!

A Vehicle Communication Interface (VCI) and associated software such as Diagbox, Lexia, and Peugeot Planet 2000 are professional-level diagnostic tools. Extreme care should be taken when using these devices as incorrect use may adversely affect your vehicle...

Last post

Damnit!

Should have locked it :(

Have now :P

Replies: 2
Views: 8506

Last post by myglaren
18 Nov 2016, 17:50
Saxo VTR cant find the immobiliser! help

by Cyan » Today, 13:38
Last post by wheeler » 46 minutes ago
Replies: 4
by Cyan » Today, 13:38

First post

Ive had an alarm fault on my 2003 saxo vtr for a while now and have been doing lots of electrical testing to fix it. Battery is fine, alarm itself is fine I think the antenna coil and transponder chip is fine but will have to double check. Was going to bypass the immobiliser to rule it out bit cant seem to find it. Any help would be much...

Last post

Are you sure this is a factory alarm? The VTR didn't have a factory alarm as standard like the VTS however it was an option.
Do you have this button in the pic below? looks like a speaker with a cross through it.
Any brand name on the alarm you removed? The factory & dealer accessory ones were made by Texton.
Is the immobiliser warning lamp coming...

Replies: 4
Views: 40

Last post by wheeler
46 minutes ago
C4GP 1.6 BlueHDi first cat up/downstream temp sensors reversed is okay?

by I want my XM back » Today, 17:20
Last post by I want my XM back » 49 minutes ago
Replies: 4
by I want my XM back » Today, 17:20

First post

A strange query, thoughts welcome.

I had put the explanatory how-we-got-here ramble then the question about aftermarket twin temperature sensors for the 1.6 BlueHDi. The ramble is really to share knowledge about leaking exhausts and removing the sensors so I have moved the punchline question to the top. I don't think this has been discussed,...

Last post

Thank you for your quick reply Marc. I would call that two sensors (pre/post) sharing one connector, but yes. Which appear separately in Lexia (I think), so they're not wired together electrically (series/parallel) in the ECU and measured as a pair. The ECU knows which is pre/post and the aftermarket manufacturer says they have OE samples wired...

Replies: 4
Views: 69

Last post by I want my XM back
49 minutes ago
LEXIA NORFOLK / SUFFOLK / CAMBS AREA HELP !

by CARO » Today, 15:05
Last post by GiveMeABreak » Today, 18:01
Replies: 2
by CARO » Today, 15:05

First post

Hi guys
Is there anyone with a Lexia in the Norfolk / Suffolk etc area that can help ..need to code AUX Radio input

Many thanks

Citroen C4 2009

Last post

Have a look at our list of members who have offered Lexia / Peugeot Planet 2000 / Diagbox Diagnostics help if you haven't already seen it - link below:

At the end of the list is a link to a Google Map, showing the geographic locations of members and details. Just use the Private Message or Email links on the member's profile to contact anyone...

Replies: 2
Views: 29

Last post by GiveMeABreak
Today, 18:01
Stiff suspension after spheres regassing - C5 X7

by GolfMk1Vr6 » Yesterday, 19:57
Last post by GolfMk1Vr6 » Today, 16:07
Replies: 14
by GolfMk1Vr6 » Yesterday, 19:57

First post

Hi!

1 month ago i have regassed 6 spheres on my Citroen C5 X7 Tourer, 2.0 HDI 2012.

On the very first ride i have noticed that the suspension became quite stiff, it wasn't as soft as before.

Thinking that one sphere didn't hold the pressure, today i have rechecked the front ones and the pressure is fine.

The suspension level is correct, made...

Last post

The only problem i had with the suspension was the rear height sensor rod that was rusted, the hydraulic pump was working permanently on the last height position without finalising it.

The mechanic cleaned the rod, installed it back, did the level and now it goes up fine.

Might be a problem with the sensor itself?

Replies: 14
Views: 180

Last post by GolfMk1Vr6
Today, 16:07
EML on

by Miapops50 » 21 Apr 2024, 14:10
Last post by Miapops50 » Today, 15:36
Replies: 4
by Miapops50 » 21 Apr 2024, 14:10

First post

Hi I’m not sure if I’m on the right part to ask a question about my Citroen C3. I’m not very good with things online. I have a 2014 Citroen C3. The EML came on 5 weeks ago. The RAC said I needed a new lambda sensor so took to garage and had this done. 2 days later light came on again and RAC said my spark plugs were broke so paid for 3 new ones....

Last post

Thanks for all the helpful replies!!!

Replies: 4
Views: 80

Last post by Miapops50
Today, 15:36
C4 B7 Semi-Automatic Gearbox Oil Specifications

by pablo95 » 18 May 2022, 04:27
Last post by Ammonia2418 » Today, 14:25
Replies: 4
by pablo95 » 18 May 2022, 04:27

First post

Hello everyone, im about to change the gearbox oil on my 2014 C4 1.6 e-hdi 115 (9HD) semi-automatic (BVMP? or EGS6? still dont know the difference) 8-[ 277736900_515498550074411_8759722569844857949_n.jpg
After some research i found 2 different opinions:
1) Citroen suggests TOTAL 75w80 ?
2) Some owners suggest 75w !

The second is fully synthetic,...

Last post

VF7**************[VIN obfuscated, can be read by forum staff]

Thanks a bunch mate. I actually managed to find in the Manual where to drain it, see attached picture

I do appreciate all the help mate, thanks a bunch.

Replies: 4
Views: 325

Last post by Ammonia2418
Today, 14:25
Leaking gearbox oil

by Mazzy7126 » Today, 10:52
Last post by Mazzy7126 » Today, 14:18
Replies: 2
by Mazzy7126 » Today, 10:52

First post

I have a problem with a leak of gearbox oil from the driveshaft seal. I need to buy new seals, my confused by which ones I need. Can anyone help provide me with the part numbers and the replacemnt oil required. It's a citroen c4 GP 1.6 diesel semi automatic.
Vin: VF7**************[VIN obfuscated, can be read by forum staff]
Thanks

Last post

Cheers, I have it sorted now, a Citroen dealer eventually called me back and provided the part numbers I need. So ordered from GSF.

Replies: 2
Views: 43

Last post by Mazzy7126
Today, 14:18
Buying a 2008 C5 2.7 hdi 204cv - what to look for?

by steveclv » Today, 14:16
Replies: 0
by steveclv » Today, 14:16

I am fortunate to be living in France so have plenty of C5s to look at but a 2008 C5 with a 2.7 hdi 204cv engine and auto box has caught my eye.
Are there any special things that I need to check when viewing the car please - stuff relating to the engine mainly
Thanks!

Replies: 0
Views: 15

Last post by steveclv
Today, 14:16
New suspension spheres!

by aerodynamica » 12 Aug 2022, 17:05
Last post by Kees » Today, 13:40
Replies: 6
by aerodynamica » 12 Aug 2022, 17:05

First post

Ok, not new but regassed. I sent my front corner spheres to Pleiades for recharge and they did a champion job and returned very quickly. Repainted too.

I am delighted with the ride quality now - a new front center sphere and now regassed corner spheres, new rear center pair. If only I could actually remove the rear corner spheres I'd have sent...

Last post

@Maciejz:.
For the center sphere on the left side, you have to remove the left drive shaft and the 6mm bolt beneath the subframe with hold the airco tube.
Then with a long chisel you can hammer it loose.
It's not really difficult.
Greetings,
Kees.

Replies: 6
Views: 478

Last post by Kees
Today, 13:40
ABS light 'No function' but no ECU fault code, how clear? BSI?

by captainkephart » 03 Apr 2024, 09:59
Last post by captainkephart » Today, 11:14
Replies: 16
by captainkephart » 03 Apr 2024, 09:59
1

2
First post

Hi FCF Team,

I have looked to see if this question is covered elsewhere, but don't think so? Sorry if being dorf!

On a 2009 Xsara Picasso petrol 1.6 DOHC.

Turn on ignition and even before engine start the car beeps once and the 'ABS fault non-function' message comes up.
But car drives normally and the light stays on all the time.

OBD reader...

Last post

Hi Wheeler,
Sorry for the slow reply to your good suggestions.
Yes, the ABS light comes on along with the message.
I had the car tested with a 'proper' OBD reader, still no fault codes.

I replaced the two front sensors (both were damaged) and cleaned the road dirt off the slotted rings. Close check showed up no cracks or missing segments. A...
Replies: 16
Views: 231

Last post by captainkephart
Today, 11:14
Blistered paintwork

by emlo68 » Today, 09:28
Last post by emlo68 » Today, 10:50
Replies: 4
by emlo68 » Today, 09:28

First post

Hi all,

My car (Citroen C3 Feel Puretech) has developed blistered paintwork on one door panel (see picture).

Please can anyone advise me of the best way to treat this. Is it going to need a respray ?

Many thanks in advance

Jon

Last post

That has been my theory Marc. Like you say its coming from the inside out so does appear to have been a previous dodgy paint job.

Replies: 4
Views: 43

Last post by emlo68
Today, 10:50
c5 x7 starts then after 2 - 3 sec. shuts off. After changing cabin filter.

by obolikol » 11 Apr 2024, 20:22
Last post by darbuck » Today, 10:49
Replies: 12
by obolikol » 11 Apr 2024, 20:22

First post

Hi,
I have a problem. I changed my cabin filter myself and after that, my car starts and shuts down after a few sec. I may have moved some wiring but i dont know where to check first. No errors are comming on the dashboard.
2.0 136km
Obolikol.

Last post

Great to hear you are back up and running A bsi reset should have done that for you.

Replies: 12
Views: 311

Last post by darbuck
Today, 10:49
Change the water cooling manifold 1336 x3 behind the engine 1.6 HDI in a Xsara Picasso

by Drawork » 22 Apr 2024, 09:05
Last post by Drawork » Today, 10:33
Replies: 2
by Drawork » 22 Apr 2024, 09:05

First post

Hi everyone, I'm new in the forum, I bought a Xsara Picasso 1.6 HDI with FAP 110CV in August 2022 and It has been working perfectly. I knew I had to do a couple of things like change the glow plugs or other things that weren't Vital . The other day an error related to the EGR showed up in the OBD2 and I decided to solve both problems and clean the...

Last post

There seem to be lots of aftermarket ones available - the alternative part number may be a bit cheaper, and slightly easier to fit. As I said in that other thread, I am not at all sure how you would change this - got to be driveshaft out at least. I do wonder if you need to remove the water pump to free the bottom end.

But, is the V3 version...

Replies: 2
Views: 66

Last post by Drawork
Today, 10:33
C5 III X7, fail of manual brake-function

by XMClive » 03 Jan 2023, 11:04
Last post by Suomipoika » Today, 10:29
Replies: 10
by XMClive » 03 Jan 2023, 11:04

First post

Hello,

I try to turn to this forum, because my C5 III X7 (2014 HDI Excl.) has a very special problem, maybe someone can help;
in the German forum there’s nearly nobody, who has similar trouble.
Code ‘C1555’ (only), manual brake-switching doesn’t work, automatic on/off is working as it should, P-Symbol displayed permanently, nothing else....

Last post

It was a C5 (2015) fault with manual braking 7092: electric handbrake / steering / 7095: electric handbrake assembly / wire 10 across the protective tube. About 10 cm from the connector to the electrical assembly. Wire 4430.

Replies: 10
Views: 373

Last post by Suomipoika
Today, 10:29
ECU problems

by Paulc5060 » Today, 09:44
Last post by GiveMeABreak » Today, 09:54
Replies: 1
by Paulc5060 » Today, 09:44

First post

So I've been to Citroen today to check on my picasso C4 65 plate 1.6 diesel . Not looking good ECU locked and will not start. Waiting for Citroen head office to look into it ? If it's no good can I fit a second hand ECU kit . Can someone tell me what I would need to change over also if I go that way what happens to my mileage . As my car has
only...

Last post

Has you taken the vehicle to anyone else / another garage just before this happened? If somebody has mucked about with the engine ECU they may well have mis-configured it.

Normally this happens when the fobs are not initialised after a car battery change of the batteries in the fobs and can be reinitialised following the relevant part after the...

Replies: 1
Views: 28

Last post by GiveMeABreak
Today, 09:54
Testing turbo VNT actuator position sensor?

by yason » Yesterday, 21:37
Replies: 0
by yason » Yesterday, 21:37

After some VNT trouble last year I have the turbo off my DS5 hdi163 (RHH) on the bench for cleaning the VNT vanes. While I'm at it I'd like to test the VNT actuator position sensor as well but it seems I don't seem to get anything sensible out of the three pins.

Does anyone know how to test the position sensor that sits on top of the actuator? I...

Replies: 0
Views: 26

Last post by yason
Yesterday, 21:37
HDi noise..

by xsara92 » 20 Apr 2024, 14:09
Last post by dulenator » Yesterday, 19:18
Replies: 1
by xsara92 » 20 Apr 2024, 14:09

First post

This is just an open query, and perhaps not enough to justify a thread but there may be opinions ..

Has anyone managed to reduce the noise level of an HDi, either by noise-absorbing material in the engine bay, or some kind of mod? Are some parts of the drivetrain particularly noise generating and amenable to silencing?

If just the idling noise...

Last post

I would start with the engine mounts. These can make a big difference in the noise department. I recently changed mine after two years of service and a lot of noise disappeared. I thought there was something wrong with the engine type of noise.

Replies: 1
Views: 54

Last post by dulenator
Yesterday, 19:18
C4GP battery drain after battery change

by dudi0108 » Yesterday, 19:01
Replies: 0
by dudi0108 » Yesterday, 19:01

Hi everybody!

I haven't found anything similar to my problem, that's why i started this topic.
So, the car is a 2012 c4 grand picasso 1.6 e-hdi, which has a start stop system.
The old battery is a Varta AGM 70Ah 760CCA battery, which is like the original one accorsing to my findings.
The new battery what I installed aprox. 2 weeks ago is an Exide...

Replies: 0
Views: 34

Last post by dudi0108
Yesterday, 19:01
C4 auto lock/unlock

by the2ems » 18 Feb 2024, 13:20
Last post by the2ems » Yesterday, 18:39
Replies: 19
by the2ems » 18 Feb 2024, 13:20
1

2
First post

Recently change from a C3 Aircross to a C4 C-Series.
With auto lock/unlock activated, does the vehicle “deadlock”?

Last post

BSI software updated today. The only thing I noticed was I couldn’t lock or unlock the vehicle using the fob. Proximity lock/unlock worked ok. Quick call to the dealer who talked me through fob re initialisation and all is ok.
Replies: 19
Views: 385

Last post by the2ems
Yesterday, 18:39
C4 mk2 revving issues

by K_gopsill » 15 Apr 2024, 06:37
Last post by K_gopsill » Yesterday, 11:17
Replies: 11
by K_gopsill » 15 Apr 2024, 06:37

First post

Hi, i have a c4 mk2 1.6hdi and have issues with rough idling and struggling to rev over 3k. I have had error codes P1445 and p3007. I have changed the egr valve and have taken off the bottom part of the dpf and gave it a soak with off car dpf cleaner and power washed out, but still these errors persist and is still sluggish, what else could i look...

Last post

Had a watch, thanks, even though i have the wynns off car dpf cleaner, i'm going to go down the hydrochloric acid route, do all brick cleaning acids have this, as i have a screwfix round the corner from me and they have some but doesn't state the ingredients!

Replies: 11
Views: 158

Last post by K_gopsill
Yesterday, 11:17
Citroen Xsara Picasso tow bar wiring.

by jscadden » Yesterday, 00:35
Last post by GiveMeABreak » Yesterday, 10:25
Replies: 3
by jscadden » Yesterday, 00:35

First post

Just fitted a towbar to the car to tow a small trailer.

The towbar came with a wiring kit which included relay for use when certain circuitry was installed on the car .

The relay supplied is a TEB7AS 7 Way Universal Relay including buzzer.
Is this a necessity on this vehicle or can I just install a buzzer for the indicators?

Last post

It is necessary because they specify that they take the lighting signals and covert this into a 12V feed for the trailer lighting so it doesn’t take power from the lighting circuit on the car. That is why it is there and requires a 15a fused supply.

Of course it does not support vehicle ESP systems with a special towing programme which your...

Replies: 3
Views: 47

Last post by GiveMeABreak
Yesterday, 10:25
Dealing with the 1.6 e-HDI Alternator Dilemma

by Palex12 » 21 Apr 2024, 20:42
Last post by GiveMeABreak » Yesterday, 09:26
Replies: 5
by Palex12 » 21 Apr 2024, 20:42

First post

Hi everyone,
I own a 2015 Citroen C5 with a DV6C e-HDi diesel engine. I need to replace the alternator, but I'm having trouble choosing the right one.
According to the catalog using my VIN, the correct part number is 5705PA, but alternators with that part number are unusually expensive. Does anyone know why? Are there any alternatives?
I've found...

Last post

Thanks for the help, folks! If I understand correctly, there's no equivalent for an OEM Valeo product, right?
There are generally always alternatives , but if you need confirmation of official part numbers, please see below:

We can help if you need an original genuine part number, part diagram or factory build sheet and can't already find the...

Replies: 5
Views: 103

Last post by GiveMeABreak
Yesterday, 09:26
Yup - It happened - I'm once again Activa-ted

by yoseff » 22 Apr 2024, 01:39
Last post by yoseff » Yesterday, 02:13
Replies: 7
by yoseff » 22 Apr 2024, 01:39

First post

(/Ironic mode on)As i had lots of time available and nothing to worry about (/ironic mode off) , i did it again... Got myself an Activa S2 from 2000 :-D
Pics to come soon , but i can advance it is an 2.0 Hdi and black - No polish & detailling for now , as i have quite a bit to do on suspension department.
Spheres blown , missing some gaiters -...

Last post

Thanks for the answers. :) Will start by the basics - all spheres with right pressure, height and sc-car adjusted properly , and only then will clean filters and put fresh LHM & Bleed brakes. That should be a good start.
It's not a project for a hurry , but do be well done with time.
Have Quite a bit of spare parts for it , so that will not be a...

Replies: 7
Views: 144

Last post by yoseff
Yesterday, 02:13
Citroen C4 hatch 2006 1.6 hdi brakes disc sizes

by August » 23 Apr 2024, 20:35
Replies: 0
by August » 23 Apr 2024, 20:35

Hello! Citroen C4 y2006 1.6 hdi 80kw manual (can provide VIN if needed)

Can't seem to find information, because I find it hard to navigate the forum

I need information about rear disc brake dimensions and what type of brake pads.

I was searching the web to buy rear brake discs and I encountered two different types of rear brake sizes... the...

Replies: 0
Views: 50

Last post by August
23 Apr 2024, 20:35
Limp mode codes.

by Citralex234 » 23 Apr 2024, 19:40
Replies: 0
by Citralex234 » 23 Apr 2024, 19:40

Hi probably the wrong place but here goes . C5 X7 2ltr diesel in limp mode after a fast left hand bend . Sorts itself out next day but engine light still on , that goes out by the next day. This repeats ( apart from the bend) managed to get codes read off my phone . I'm only ok with Mechanical problems so need someone clever to point me in the...

Replies: 0
Views: 30

Last post by Citralex234
23 Apr 2024, 19:40
Intermittent electrical issues with 2014 Citroen Relay (X290)

by Charliebobgordon » 13 Jan 2024, 00:13
Last post by GiveMeABreak » 23 Apr 2024, 19:37
Replies: 9
by Charliebobgordon » 13 Jan 2024, 00:13

First post

Hello, we’ve been having some intermittent issues with our van lately and I just wanted to post here first to see if anyone had any ideas.

It’s a self-converted camper, we’ve been travelling around in it for the past year without issues until the past couple of months where we’ve been in much colder and wetter conditions. Since then, we’ve had...

Last post

Ok, so on this Ford Puma engine, the EGR valve is attached to the Gas Water Exchanger module, but is available separately. So obviously I can't tell you what was replaced, but at least you know they can be replaced separately.

Replies: 9
Views: 32206

Last post by GiveMeABreak
23 Apr 2024, 19:37
Xantia ACTIVA 2ltr (TaffyTiva)....the reserection begins !

by Stickyfinger » 13 Apr 2024, 18:12
Last post by Stickyfinger » 23 Apr 2024, 16:16
Replies: 7
by Stickyfinger » 13 Apr 2024, 18:12

First post

Hi Chaps, I am very slowly working on a V6 brake upgrade on the TaffyTiva 2ltr.............the original brakes were buggered and the flexi's splitting and I had a set of V6 calipers, so why not :)

Has any one got any photos of the fitting where the flexi-hose attach to the hard lines on the inner wing ?

Do they screw into a fitting (on the inner...

Last post

The TaffyTiva now has V6 (288mm) brakes.....both calipers on now...time to tighten everything up, insert pads and handbrake cables...them move onto the rears...

20240423_123855.jpg

20240423_123836.jpg

Replies: 7
Views: 205

Last post by Stickyfinger
23 Apr 2024, 16:16
Citroen Jumper 2020 2.2 BlueHDI 165 - do I have eolys?

by DeepB » 23 Apr 2024, 15:15
Last post by GiveMeABreak » 23 Apr 2024, 15:26
Replies: 1
by DeepB » 23 Apr 2024, 15:15

First post

Hello,

I have a Citroen Jumper 2.2 BlueHDI 165 from 2020.

Do I have eolys? If yes what Type?

Thank you
Daniel

Last post

Of course with that data you will have a DPF. Please post your VIN in full without spaces - it will be automatically masked from public view after submitting your post & will only be visible to staff. The we can advise on the type you require.

Replies: 1
Views: 33

Last post by GiveMeABreak
23 Apr 2024, 15:26
Lexia communication module for c5x7.

by obolikol » 23 Apr 2024, 10:11
Last post by Paul-R » 23 Apr 2024, 10:19
Replies: 4
by obolikol » 23 Apr 2024, 10:11

First post

Hi i have a question, will s1279 lexia module connect with my c5 x7 or do i need some other module for thus car?

Last post

What is more important is to know whether your VCI (the hardware that plugs into the OBD socket) is full chip and has Rev C chip firmware. Also, what software are you using? Lexia is probably too old even for a 2009 X7 and you need Diagbox. What version of Diagbox are you running?

Replies: 4
Views: 72

Last post by Paul-R
23 Apr 2024, 10:19
C3 Sensor drive calibration / initial setting

by corfco » 18 Apr 2024, 20:11
Last post by ozvtr » 23 Apr 2024, 09:03
Replies: 8
by corfco » 18 Apr 2024, 20:11

First post

Hi All,

Newbie on this forum as was trying to wade through another one, so firstly thanks for existing.

I have my first Citroen, a 2012 C3 1.4 petrol with Sensor drive Semi Auto box, saved from the scrapyard as IMHO it was worth saving.

It had coolant leak (bad)and very jerky unreliable gear change, so I basically paid scrap money for it, and...

Last post

Um...Ok, then how did you reset the clutch actuator?

Here is a very good look at the clutch actuator, how it works and how to reset it. He resets the actuator at 6:05.

When the actuator is mounted back in the car, the actuator is slid forward until the nose of the shaft just touches the clutch fork. Then the actuator is moved forward a...

Replies: 8
Views: 138

Last post by ozvtr
23 Apr 2024, 09:03
Injectors misbehaving but trying to understand the numbers

by darbuck » 14 Mar 2023, 19:33
Last post by darbuck » 23 Apr 2024, 06:44
Replies: 177
by darbuck » 14 Mar 2023, 19:33
1

…

8

9

10

11

12
First post

Hi Lads I ran a diagnostic on the car because she smells fuelly, yes it's the C5 that has all the problems but I bought it thinking it had an injector problem. Can anyone tell me what the us stands for. To me none of the injectors look right numbers wise but I am hopeful if being corrected. No fault codes apart from the glow plug fault but we know...

Last post

Thanks lads gave the interior a clean last night. Getting excited now 😃
Replies: 177
Views: 4776

Last post by darbuck
23 Apr 2024, 06:44
c4gp 1.6hdi tubo solenoid vacuum question

by kingjafad » 22 Apr 2024, 10:38
Last post by RichardW » 22 Apr 2024, 20:35
Replies: 3
by kingjafad » 22 Apr 2024, 10:38

First post

Hi Folks,
on my 2010 C4GP 1.6hdi (auto) I have a P0299 code (turbo pressure lower than reference flow) - It is actually reading turbo pressure but there is no vacuum to the turbo 'lever' (turbo end of pipe 7 in picture below). The 'lever' does actually move freely by pushing it and seems to hold the vacuum (pulling the pipe off and putting finger...

Last post

Possibly it is broken off, and the spigot is inside the pipe?

Replies: 3
Views: 65

Last post by RichardW
22 Apr 2024, 20:35
2010 C5 X7 2.0 Hdi VTR+ NAV 163 Injector Clamps

by C5owner » 14 Aug 2018, 19:54
Last post by howardaskew » 22 Apr 2024, 20:05
Replies: 19
by C5owner » 14 Aug 2018, 19:54
1

2
First post

Hi,
I have recently had the injectors replaced on the above vehicle, however, since replacement, 2 clamps have since snapped.
I have now ordered a complete set of 4 from my local Citroen agent plus matching bolts.
Has anyone else suffered this issue, is it an easy job for a relative novice to replace these at home.
Cheers

Last post

Thank you very much. It looks quite thorough. I might be able to remove the injector using that document.
I appreciate you taking the time to post up.
Replies: 19
Views: 1396

Last post by howardaskew
22 Apr 2024, 20:05
Adblue reprogramming legal option

by Arduer » 22 Apr 2024, 12:15
Last post by wheeler » 22 Apr 2024, 18:36
Replies: 2
by Arduer » 22 Apr 2024, 12:15

First post

Hi

I've come across a company offering a re- programming of the ECU which does not disable the Adblue system, but stops the car being affected by error messages, count down, going in to limp mode etc... It is claimed that it is a legal way to solve the issue of a faulty system. Does anyone have any experience of this? I'm not interested in the...

Last post

Sounds a bit sketchy, i'm guessing all they are doing is mapping the ECU to ignore & block all fault codes relating to the SCR system, the system may still work but if it did stop working you would have no idea that it has stopped working as if the system is not working it wont display any errors. I suppose you would realise when you aint had to...

Replies: 2
Views: 91

Last post by wheeler
22 Apr 2024, 18:36
1.6 HDI buying advice

by andy5 » 27 Dec 2019, 18:40
Last post by BiT82 » 22 Apr 2024, 18:04
Replies: 17
by andy5 » 27 Dec 2019, 18:40
1

2
First post

I may be going to look at a car with this engine.

I get the impression it doesn't have such a rock solid reputation as the 2 litre versions, and may be more vulnerable if not being fastidiously looked after.

What are the potential problems, and what degree of scepticism is needed if looking at one which may not have full service history? Are...

Last post

Apparently it's the DV6C (9HD), so all looks well there.

@Richard, thanks for the info.
I had budgeted that I'll want to change the cambelt, as the car has only done 50k but is a 14 plate, a rough guess is hopefully around the £400/500 mark, but well worth it for piece of mind.

Really appreciate your replies. Ta very much
Replies: 17
Views: 3452

Last post by BiT82
22 Apr 2024, 18:04
Relay 2019 2.0 HDI P0093 Advice

by beggers » 19 Apr 2024, 15:10
Last post by beggers » 22 Apr 2024, 16:50
Replies: 1
by beggers » 19 Apr 2024, 15:10

First post

Hi everyone,

Recently bought myself a 2019 Relay 2.0 HDI 130 to convert myself to a camper.
It has 182k miles and was fleet owned but pretty straight/clean with good service record.
I've done about 500 miles in it since I picked it up and about 250 miles since owning P0087 and P0093 codes for fuel pressure low/leak codes have come on.

Changed...

Last post

I've noticed slight increase in engine oil over 500miles on reflection so I've ordered a leak off test. Will share results once completed in case anyone else has similar in the future.

Replies: 1
Views: 64

Last post by beggers
22 Apr 2024, 16:50
C3 Pluriel Electronic nightmare!!

by AllanA » 22 Feb 2024, 19:51
Last post by CitroJim » 22 Apr 2024, 15:45
Replies: 54
by AllanA » 22 Feb 2024, 19:51
1

2

3

4
First post

Hello all. Firstly sorry about the length of this post but I'm looking for some help with the electronics on my wifes 2007 Pluriel 1.4HDi.

Last year there was a problem with the engine sometimes running rough or just cutting out without warning. Turned out to be the reluctor ring on the crankshaft pulley. I made a previous topic on that.

With...

Last post

Superb work :D
Replies: 54
Views: 1073

Last post by CitroJim
22 Apr 2024, 15:45
engine FAULT replacement needed on citroen ds4 2012[engine checklight

by LOVEMORE » 10 Mar 2023, 10:46
Last post by GiveMeABreak » 22 Apr 2024, 13:39
Replies: 20
by LOVEMORE » 10 Mar 2023, 10:46
1

2
First post

when l turn ON ignition this notification pop up 3pop up 3 times
and dessappear leaving engine checklight on on dash board ,tried to clear it bt later on it comes back ,wat might bre the problem and how CAN L FIX IT

Last post

So you need to get it diagnosed properly as I said above. Do you think we magically know what the issue is? That's what diagnostic scanners are for, to help troubleshoot.
Replies: 20
Views: 1340

Last post by GiveMeABreak
22 Apr 2024, 13:39

New Topic

42847 topics

Page 1 of 857
- Jump to page:
1
2
3
4
5
…
857
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum