Hi guys,
Unfortunately one of my locking wheel nuts snapped a year ago so i got a new set from Peugeot last year. Annoyingly, possibly the second time i used the key on one of the wheels, another locking nut broke on me. Does anyone recommend a good set to buy that will fit my Peugeot 508 19" wheel please? maybe tempted to buy just 4 normal bolts to fair to avoid the situation again but i don't know the size i need if anyone does at all?
many thanks
Wheel Nuts!
Moderator: RichardW
-
- Posts: 4
- Joined: 23 Mar 2024, 19:55
- Location: Staffs
- My Cars: Peugeot 508 GT 2.2
- x 1
- Paul-R
- Donor 2023
- Posts: 6949
- Joined: 07 May 2009, 16:24
- Location: Wirral, NW England; Vaucluse 84, France
- Lexia Available: Yes
- My Cars: 2015 1.6 Blue HDi 120 Peugeot 308 Active SW
2013 2.0 HDi 163 C5 Exclusive Tourer
2003 2.0 HDi 110 C5 Exclusive Estate (Gone)
2001 2.0 HDi 90 Xsara Estate (Gone) - x 1383
Re: Wheel Nuts!
I would say ditch all the locking wheel bolts and just fit ordinary ones. Be aware that there are two types which need different size wheel spanners (17mm is one of the sizes) so try for the same size as you already have. It's not the end of the world if you get a different size bolt, just an annoyance to have to carry two different wheel spanners.
As I get older I think a lot about the hereafter - I go into a room and then wonder what I'm here after.
Inside every old person is a young person wondering what the hell happened.
"Trying is the first step towards failure" ~ Homer J Simpson
Inside every old person is a young person wondering what the hell happened.
"Trying is the first step towards failure" ~ Homer J Simpson
- GiveMeABreak
- Forum Admin Team
- Posts: 37444
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5742
Re: Wheel Nuts!
See my post here- I used these limpet type that won't break off. Never had another issue and the quality was superb:Peugeot508gt wrote: ↑24 Mar 2024, 19:18 Does anyone recommend a good set to buy that will fit my Peugeot 508 19" wheel please? maybe tempted to buy just 4 normal bolts to fair to avoid the situation again but i don't know the size i need if anyone does at all?
many thanks
viewtopic.php?p=659965&hilit=limpet#p659965
Please Don't PM Me For Technical Help
Marc
Marc
Re: Wheel Nuts!
This for me is the best advice.Paul-R wrote: ↑24 Mar 2024, 20:15 I would say ditch all the locking wheel bolts and just fit ordinary ones. Be aware that there are two types which need different size wheel spanners (17mm is one of the sizes) so try for the same size as you already have. It's not the end of the world if you get a different size bolt, just an annoyance to have to carry two different wheel spanners.
One of the first things i do as soon as i get a new car is to remove the locking wheel bolts/nuts & replace them with standard ones. Not worth the grief they can cause, Especially if someone else is involved in removing & refitting your wheels. Even though i'm the only one who is ever likely to be removing & refitting wheels on my vehicles they still get thrown in the bin.
Dont think i've heard of anyone getting wheels stolen since the early 2000's.
- myglaren
- Forum Admin Team
- Posts: 25488
- Joined: 02 Mar 2008, 13:30
- Location: Washington
- My Cars: Mazda 6
Ooops.
Previously:
2009 Honda Civic :(
C5, C5, Xantia, BX, GS, Visa.
R4, R11TXE, R14, R30TX - x 4924
Re: Wheel Nuts!
I was going to dump my locking wheel nuts. A puncture put some urgency into it as I couldn't find the key (new car at Christmas).
Turned out I had been beaten to it and they were normal-ish nuts but different to the other four on each wheel. Broke a socket trying to remove them.
These are the first 21mm nuts I have had on wheels. Tyre fitter got them off and loosened/re-torqued them all
Turned out I had been beaten to it and they were normal-ish nuts but different to the other four on each wheel. Broke a socket trying to remove them.
These are the first 21mm nuts I have had on wheels. Tyre fitter got them off and loosened/re-torqued them all
- Paul-R
- Donor 2023
- Posts: 6949
- Joined: 07 May 2009, 16:24
- Location: Wirral, NW England; Vaucluse 84, France
- Lexia Available: Yes
- My Cars: 2015 1.6 Blue HDi 120 Peugeot 308 Active SW
2013 2.0 HDi 163 C5 Exclusive Tourer
2003 2.0 HDi 110 C5 Exclusive Estate (Gone)
2001 2.0 HDi 90 Xsara Estate (Gone) - x 1383
Re: Wheel Nuts!
My daughter's Hyundai i30 has proper studs and 21mm nuts. Must be an oriental thing, even though it was made in Czechia.
As I get older I think a lot about the hereafter - I go into a room and then wonder what I'm here after.
Inside every old person is a young person wondering what the hell happened.
"Trying is the first step towards failure" ~ Homer J Simpson
Inside every old person is a young person wondering what the hell happened.
"Trying is the first step towards failure" ~ Homer J Simpson
- myglaren
- Forum Admin Team
- Posts: 25488
- Joined: 02 Mar 2008, 13:30
- Location: Washington
- My Cars: Mazda 6
Ooops.
Previously:
2009 Honda Civic :(
C5, C5, Xantia, BX, GS, Visa.
R4, R11TXE, R14, R30TX - x 4924
Re: Wheel Nuts!
Civic had similar looking nuts but not 21 mm. 19 I think.
I never got round to swapping them. Found a huge pile at the tyre fitters but out of several hundred only two fit, the rest were all slightly different threads.
I never got round to swapping them. Found a huge pile at the tyre fitters but out of several hundred only two fit, the rest were all slightly different threads.
- darbuck
- Donor 2023
- Posts: 1036
- Joined: 25 May 2014, 16:45
- Location: Offaly, Ireland.
- My Cars: 2008 Citroen C5 X7 Tourer VTR+ (138 BHP)
2007 Nissan Primera P12 1.6 T-Spec (110BHP)
2003 Citroen C5 Estate level 2 (110 BHP) 2.0 HDI
2001 Nissan Maxima QX 2.0 V6 - x 143
Re: Wheel Nuts!
All Nissan's have 21mm nuts, I think Toyota are the same so yeah your probably right on Asian yolks. I get rid of lock nuts straight away as well, had a SAAB 95 vector a few years back lovely wheels went to pull the drivers wheel off and ended having to get it drilled out destroyed the wheel I was disgusted had to buy a new wheel which took a while they were bloody rare.
Darren