GS junk in your garage?

[Wollop]

Any current or past GS owners out there that happen to have a spare wheel and a jack they no longer require lying around in their garage?

The wheel ought to be the design that doesn't have vent holes. I think this was used on the last GSs and then GSAs?

[Stonehopper]

There are two types if I am not mistaken. The older type are hard to find - those with ten holes. The later type have six slots.

I don't have any surplus wheels, but I might have a couple of jacks that are surplus. I'll check out the barn later today and take photos.

Wheels:

[Wollop]

Thanks for the reply, would you be prepared to post a jack by whatever mean is the cheapest? I am in Sussex.

Our wheels have no holes, they look like this (it is a late G Special):

DSC03258 (1) by dralowid, on Flickr

[myglaren]

⇧ Looks like the one I had. Still maintain it is the best car I have owned.
Can't remember if it had holes in the wheels or not but it did have Pallas style wheel covers in stainless steel that covered the whole wheel.

[Stonehopper]

Thanks for the reply, would you be prepared to post a jack by whatever mean is the cheapest? I am in Sussex.
(snipped)

Ah! So there was a full disc wheel.

I'll be in the barn later. Will post images. Want nothing for them save the postage. Will weigh and compare costs.

[Stonehopper]

Two jacks, different brackets at the top.
My own GS (1975 Pallas) is the same as the left hand one. Slips into a bracket under the cill beneath the 'B' pillar.
I have no idea what the right hand one fits, certainly not my GS!

Postage under £4, weight 1.79kg. I used a BN16AU postcode (Brighton & Hove).

Take your pick.

[Wollop]

Hi Derek,

Thanks for digging them out. I need to get down to the car (which is tucked up in my son's garage) and work out which one fits! If it is OK with you I'll get back to you hopefully next week.

Best

Michael

[Stonehopper]

No problem. If either are chosen just Private Message me and we'll swop details.
Clicking on my Stonehopper name will get a PM field available.

[Vic Evans]

Posts from members such as these show the value of this place.
Long may it continue.

[Wollop]

Hi Derek,

PM sent

Michael

[MarcF]

I'm also after a jack for my newly enquired GS Pallas if anyone had a spare one?

[Stonehopper]

I'm also after a jack for my newly enquired GS Pallas if anyone had a spare one?

I still have one spare as shown in my comments above, it's the one on the right hand side in the images. Please note the welded on clip on the top, it is different to the left and you would need either to ascertain that it would fit into any jack location support on the cill underside - or - cut it off and adapt and fit a new 'clip' so as to fit the cill underside. The clip is not a load bearing part of the jack, it only holds the jack in place while winding it up.

It has been cleaned up and oiled and is functioning as designed.

Private message me if still interested.

Derek.