Hi!
I have a recently acquired 2014 5008 1.6Hdi. I had come to the conclusion that this had R1234YF refrigerant in it. I now have my doubts. I cannot get a low side coupler to fit, designed for R1234YF, and I understand these ARE a different size to R134a fittings. Has the place I got my info for type of refrigerant lead me astray?
Thanks.
Phil
2014 5008 refrigerant
Moderator: RichardW
-
- Posts: 43
- Joined: 27 Mar 2022, 08:50
- Location: Lancaster UK
- Lexia Available: Yes
- My Cars: 307SW. 5008
- GiveMeABreak
- Forum Admin Team
- Posts: 37444
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5742
Re: 2014 5008 refrigerant
Quite possible. I've replied to your PM.
The 5008 could have been fitted with either type of refrigerant, but as I mentioned, the connectors should only accept the fittings for the correct type when it's being recharged or serviced.
Also, I highly suggest you don't add any 'leak sealant' into the system. These things work by seeking out air and literally turns into a ball of gunk. Get that further into the system and you are saving up major problems and expense with blockages in the heating system. This can happen if you have any air in the system - so not recommended.
My advice is to get it leak checked and find out where the leak is. If a pipe - or a condenser that can easily be replaced.
The 5008 could have been fitted with either type of refrigerant, but as I mentioned, the connectors should only accept the fittings for the correct type when it's being recharged or serviced.
Also, I highly suggest you don't add any 'leak sealant' into the system. These things work by seeking out air and literally turns into a ball of gunk. Get that further into the system and you are saving up major problems and expense with blockages in the heating system. This can happen if you have any air in the system - so not recommended.
My advice is to get it leak checked and find out where the leak is. If a pipe - or a condenser that can easily be replaced.
Please Don't PM Me For Technical Help
Marc
Marc