Need help with my xantia. (Mk1)

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
Albinoeke
Posts: 16
Joined: 15 Feb 2019, 15:47
Location: Sweden
My Cars: Citroën Xantia mk1
x 2

Need help with my xantia. (Mk1)

Post by Albinoeke »

Hi!
I'm new here on the forums and i need some advice/help.

I just bought a xantia with no more than 6500 miles (65000km) on the counter.
But the deal is my fan stopped working some weeks ago.
At first it started right away but like a month later it only worked after restarting the car a few times but now it doesnt work at all.
Also a weird thing is that when the rear heated window wouldnt start the fan wouldnt either (which does not work now either)
All of the fuses are good, i can still control the heat/cold but the fan wont blow (if i drive fast some air comes out)

I suspect its either one of the relays in the engine bay or the fan motor..

Also i need the right locations for the relays because it seems one is missing and when removed nothing happens.
Attachments
The black one was in the blue but nothing happens upon removal.
The black one was in the blue but nothing happens upon removal.
Last edited by Albinoeke on 16 Feb 2019, 13:35, edited 1 time in total.
User avatar
xantia_v6
Forum Admin Team
Posts: 9052
Joined: 09 Nov 2005, 22:03
Location: France or NewZealand
Lexia Available: Yes
My Cars: -
1997 Citroen Xantia V6 (France)
1999 Citroen XM V6 ES9 (France)
2011 Peugeot 308 CC THP 155 (NZ)
1975 Jaguar XJ-S pre-HE (NZ)
x 825

Re: Need help with my xantia. (Mk1)

Post by xantia_v6 »

I am assuming that you are talking about the interior fan, not the radiator cooling fans. (if it is the radiator fans, there is a different topic for them).

The Mk1 Xantia left the factory with no relay for the interior fan or heated rear window, but many have had one added as a result of burnt contacts on the ignition switch.

Have a read through viewtopic.php?f=19&t=24786 and the topics linked from there...
Albinoeke
Posts: 16
Joined: 15 Feb 2019, 15:47
Location: Sweden
My Cars: Citroën Xantia mk1
x 2

Re: Need help with my xantia. (Mk1)

Post by Albinoeke »

Yes i am talking about the interior fan.
So i guess these relays i took a photo of is just spares?

Thanks i'll have a look at the linked thread :-)
User avatar
xantia_v6
Forum Admin Team
Posts: 9052
Joined: 09 Nov 2005, 22:03
Location: France or NewZealand
Lexia Available: Yes
My Cars: -
1997 Citroen Xantia V6 (France)
1999 Citroen XM V6 ES9 (France)
2011 Peugeot 308 CC THP 155 (NZ)
1975 Jaguar XJ-S pre-HE (NZ)
x 825

Re: Need help with my xantia. (Mk1)

Post by xantia_v6 »

The relays in the under-bonnet fuse box vary with build date and engine types, but include: A/C, ABS, front fog lights, Headlight washer timer, Diesel timing corrector, Diesel post heat, starter safely relay, and a couple of others I can't remember for now (and I don't currently have access to all the variant diagrams). It is likely that your vehicle is not fitted with one of those options.
User avatar
white exec
Moderating Team
Posts: 7445
Joined: 21 Dec 2015, 12:46
Location: Sayalonga, Malaga, Spain
My Cars: 1996 XM 2.5TD Exclusive hatch RHD
1992 BX19D Millesime hatch LHD
previously 1989 BX19RD, 1998 ZX 1.9D auto, 2001 Xantia 1.8i auto
and lots of Rovers before that: 1935 Ten, 1947 Sixteen, 1960 P5 3-litre, 1966 P6 2000, 1972 P6 2000TC, and 1975 P6B 3500S
x 1752

Re: Need help with my xantia. (Mk1)

Post by white exec »

There could also be an Engine Running Relay, which only operates when there is output from the alternator, and powers up various current-hungry systems.
If you could post your VIN number (which will appear masked) we could start to look at the vehicle factory spec and wiring diagrams.
Chris
Albinoeke
Posts: 16
Joined: 15 Feb 2019, 15:47
Location: Sweden
My Cars: Citroën Xantia mk1
x 2

Re: Need help with my xantia. (Mk1)

Post by Albinoeke »

Well there is another relay above those pictured when unplugged starts the traction control warning on the dash but i'm not sure if it has tc.

The VIN is X11A00081A562
Online
User avatar
GiveMeABreak
Forum Admin Team
Posts: 36991
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5644

Re: Need help with my xantia. (Mk1)

Post by GiveMeABreak »

That's not your VIN - The VIN will begin VF and be 17 characters long.
Please Don't PM Me For Technical Help

Marc
Albinoeke
Posts: 16
Joined: 15 Feb 2019, 15:47
Location: Sweden
My Cars: Citroën Xantia mk1
x 2

Re: Need help with my xantia. (Mk1)

Post by Albinoeke »

Ah VF7**************[VIN obfuscated, can be read by forum staff] maybe?
Online
User avatar
GiveMeABreak
Forum Admin Team
Posts: 36991
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5644

Re: Need help with my xantia. (Mk1)

Post by GiveMeABreak »

That's the one:

Xantia 5 Door Saloon 1.8 i 8v 103 with Manual gearbox 5
Please Don't PM Me For Technical Help

Marc
Albinoeke
Posts: 16
Joined: 15 Feb 2019, 15:47
Location: Sweden
My Cars: Citroën Xantia mk1
x 2

Re: Need help with my xantia. (Mk1)

Post by Albinoeke »

Yeah, kinda hard to see the numbers hehe i have pretty bad eyesight.
Online
User avatar
GiveMeABreak
Forum Admin Team
Posts: 36991
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5644

Re: Need help with my xantia. (Mk1)

Post by GiveMeABreak »

I'll see what I have, but diagrams for MK Is are very limited...
Please Don't PM Me For Technical Help

Marc
Albinoeke
Posts: 16
Joined: 15 Feb 2019, 15:47
Location: Sweden
My Cars: Citroën Xantia mk1
x 2

Re: Need help with my xantia. (Mk1)

Post by Albinoeke »

Thanks! :-)
Online
User avatar
GiveMeABreak
Forum Admin Team
Posts: 36991
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5644

Re: Need help with my xantia. (Mk1)

Post by GiveMeABreak »

I only have the circuit for the Series 2 Xantia - although some of the heater control panels were very similar between the S1 and S2 models. So bear this in mind when looking at this as it may still be helpful.

Xantia MK II 1.8 Petrol Cabin Heating Controls
8040: Blower Speed Control (if separate)
8046: Blower Motor Resistor (if separated)
8048: The Blower Relay
8050: Blower Motor (if separate)

Image
Please Don't PM Me For Technical Help

Marc
Albinoeke
Posts: 16
Joined: 15 Feb 2019, 15:47
Location: Sweden
My Cars: Citroën Xantia mk1
x 2

Re: Need help with my xantia. (Mk1)

Post by Albinoeke »

I'm not very good at reading wiring diagrams and it doesnt seem to be exacly the same as mine, but i suppose the brown connector is for the controls and red(positive) black(ground) but there is another brighter red connector i'm not really sure about. (Is this for rhw?)

Also when the fan worked and would turn off it clicked pretty loud (most likely from a relay) if that helps anything.
Attachments
The control unit seems to be working fine as i can use both heat and cold.
The control unit seems to be working fine as i can use both heat and cold.
These are the wires going into the fan
These are the wires going into the fan
Online
User avatar
GiveMeABreak
Forum Admin Team
Posts: 36991
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5644

Re: Need help with my xantia. (Mk1)

Post by GiveMeABreak »

Yes, will likely be different as I said this was for a S2. I've looked at the wiring and even the colours are different, so didn't bother putting these up.

Unfortunately I don't have a diagram for the S1s.
Please Don't PM Me For Technical Help

Marc
Post Reply